Notes for Rev01.1

Had some problems with the variable Sync Command not being recognized and changed the input method. Voice Attack can be strange, some methods will work in a situation X but not in Y.
Anyway all the digits now require to be input as a 2 digit number, so 1-9 now becomes 01-09.
When using the Variable Synch, it helps to leave a short pause after the request, a second should be fine,then request the delta

Notes for Rev01

This is same profile as before but has two additional commands to overcome the problems of multiple paging to the kneeboard to synchronise where it starts by default in DCS compared to the Voice Attack Preset (Schematic Map)

I chose the Schematic Map as page 1 because any addtional Kneeboard pages added by the user are placed between the Maps pages and the Schematic Map. This means that adding of any user kneebooard pages does not upset the numbering for the VAD/Gnd Charts. It also means that if the user chooses to make custom commands for the user pages it does not mean any re-numbering of the exisitng charts in the kneeboard.

However this is a PIA if there's a lot of user pages in the kneeboard and particularly for VR Users. These commands are intended to be used before "Reset Kneeboard" and could easily be copied into that command should you choose to do so. I left it separate as there are ocassions when I want to reset the Kneeboard but don't want it to page forward a fixed number of pages before doing so

So Enclosed are 2 Synch Commands (both Voice Disabled)

Synch Kneeboard/Charts Fixed
Synch Kneeboard/Charts Variable

The Fixed version pages the Kneeboard forward a fixed number of pages. To change the number simply change the "Set integer [SaidChart]" command, the first line, by double clicking on it & changing the value in the box to whatever you require. By Default it's set to 10. It pages the kneeboard 10 pages+4 (so 14 in total in the default command) The +4 accounts for the 4 map pages DCS puts into the kneeboard.

The Vairiable version asks for a user input, from 1-30, you state the number and VA will page to the number stated+4 to account for the multiple map pages

The intention of the +4 pages was to make it easier. All the user needs to do is count the number of additional pages he has added and alter the fixed command to suit or say the number of pages added in the case of the vairiable command  

The idea was that you'd choose one or the other, then change the Voice Command from either "Synch Kneeboard/Charts Fixed" or "Synch Kneeboard/Charts Variable" to "Synch Charts/Kneeboard" as you'll only be using one of the two commands

To Use
Select which command you want to use and double click on it
At the top "This comand is executed"
In the "When I say" line click the check box to the left to place a mark into it.
Edit the box "Synch [Charts;Kneeboard] Fixed" or "Synch [Charts;Kneeboard] Variable" to "Synch [Charts;Kneeboard]"
In the case of the "Fixed" command change the value of "Set integer [SaidChart]" to the number you desire by double clicking on the command and changing the the value in the box to what you want
Delete the 2 commands "Synch [Charts;Kneeboard] Fixed" and "Synch [Charts;Kneeboard] Variable" if you want to (being voice disabled they won't do anything) 
That Should be it

Hope it helps, any problems PM me on the forum

Weegie

Notes on Rev00

The VA profile attached is to enable voice command selection to view various VAD and GND charts of the Airfields available in the Caucasus map.

It's not brilliant but works pretty well most of the time.

The profile uses default keyboard commands so should work with all (or most of all modules). Feel free to use it as a stand alone profile or simply import the commands into your own profile as you please (or hack it about as you want to suit your needs)............It's hardly rocket science FFS!!

The only thing that may need some adjustment is the maps command. The profile includes allocation for the incorporation of Gospadin's (sadly departed and much missed) Airfield frequency tables which I've included with the pack

Should you choose not to use them, then the map page reference will need changing to the relevant page.

I chose to start the profile at the Schematic Map (the overall map showing all the airfileds on the Caucasus map at the begining of the VAD charts) as any additional kneeboard pages generated are (usually) added after the kneeboard maps and before the Schematic map. This means that any additional custom pages to be added only require commands made for these pages and the (1..59)command widened to suit the number of addtional pages.

I abreviated the airfield command calls to suit Western tongues (I'm Scottish so my grammer and voice is terrible) Some of the airfields are a bit of a mouthful for me to say and even harder for VA to recognise. I'm not going to bother listing them, the listing is shown in the Keyboard HTML commands profile also included.

The only thing that needs doing when in the jet before using it is to use the "[" "]" commands to page to the Schematic Map, then say "Reset Charts" or "Reset Kneeboard" you should get voice feedback on what to do. REFER TO REV01 NOTES THIS HAS BEEN UPDATED

After that just state the Airfield you want EG "Kobuletti Charts" & it should take you there. The kneeboard will page when closed so if you ask for a set of charts with Kneeboard closed and you hear the voice feedback telling you that the relevant charts are selected, just open the kneeboard and you should be at that page. If the kneeboard is open then you'll be presented with a series of flashing charts as VA pages up or down to find (what it thinks is) the corect page. 

If it gets outta whack simply page back the Schematic Map and perform a reset to put it back into Synch (hint: if it gets outta whack it's only usually a page or so, therefore tell VA to go to Schematic maps, let it page you there then use the keyboard commands to get the Schematic page up, then reset it)

It also tracks the "[" "]" commands in an effort to keep it in synch, so if you go to a certain page then use the keyboard to page up and down, it should still stay in synch (but doesn't always).

Any issues, problems, misunderstandings, general abuse, stuff that drives you mad, addtional things you may want to add or if you just want to hurl abuse at me, feel free to PM me I post up on the forum as Weegie

DISCALIMER
Use at your own risk 
I shall not be held responsible for any collateral damage/insurance claims from the destruction of multi million dollar jets caused by accident/misuse/finger trouble/errors in this software  

Hope at least some sole likes it

Happy Landings

Weegie