Berndt Mangler

I found this also, are these the only two key combos that can help remove my hair...hahahah

To follow up from an earlier post, I have all _MOD's install with out issues. I must alt tab to com's quality when I enter the pit and reset them. Some times they stay set, I think if I close DCS and TS and reopen I may need to reset them. I'm just in the habit to alt tab now to check and re-verify. If I'm in a public server my self and my small [iB]clan may see some issues and crashes if its late and it's busy. Any other time we see no issues. I'm pretty sure work has been done in this regard. I just didn't want any one to think my setup is all blue sky, donuts in the morning and all that happy crap. I too can see issues but some how they subside and all is chirpity-chirp, cricketie-cricket. The Key to us has been to have all mentioned devices in that message, (TS, DCS world, A10C, Aries, Tacview, JGSME, Mulimonitor Config, any thing that edits any thing beyond DCS world) Has the Raw extricable set to run as admin. The installers and the programs them self's after the install's are set to "run as admin" This seems to be the big bottle of aspirin for me.

Good to know about editing the INI. The TGP snap shot is awesome, I'm using the crap out of it. I am renaming them after the mission, with MGRS, and its range, I can read this off the image after setting to display MGRS. I didn't keep the time stamp, but I really should, and will add it to my SOP. I'm using it to help my clan find the targets and they are using it to learn how to set the Gain and level to make the detail pop out. I've not been using the yellow identifying box as I'm a little busy. If I need one I'll use Windows Paint later. This is a great feature, not sure how to best us it just yet. What's key here is that I can take the shot with my Shifted Master mode button it shows up on the far left display, out of my immediate viewing area, then press it again and it will save, and clear for the next shot. I don't even have to look at the shot before storing it. Looking forward to an Aries Scratch and Sniff Mod...:thumbup: Ooo, Yea, have a great Christmas, Now that the whole family is over, Trust me, They don't want to watch you fly. and they they will all be leaving soon..

I punched in some goofy numbers to to the TGP statements, and crashed just before getting in the pit, I fixed the numbers and away I go. If I edit the INI file to save my quality settings, I crash. I'm forced to set it every time I get in, and works every time, hassle, but it works. I can only edit [window] for the TGP and it had to be correct, meaning a display had to be under it. and I could only edit the three radio setting, The background nor any other could be edited with out crash. so far my 3x27", 1x24", and 2 Lilliputs are working most awesome. my Drivers are 344.75

@Harle Great review, well done dude, I look forward to future extended reviews...Hint,hint.. Programming bugs are to be assumed, sounds like you got around them much like I around T.A.R.G.E.T. it's not so much buggy, actually its allowed me to get around everyone else's bugs. How'd you get the software and can I download it in an English form. @Sokol1_br This is more info than I got from the web site I was using. I need to try and score an English version of the Software tool. Looks like my language barrier is the only issue now. @PureEvil That you are, Send me a link to a Russian website..hahahah, I barely read English...hahahah Soo it can be had, Any one got Rosetta Stone I can borrow so I can buy a Mammba...hahahah... I fear this may be trouble for us Yanks, the site I was on suggested I may have issues getting one to the U.S. This may just be the reason to start my Russian classes, Then I could fly that awesome SU-27. This makes for a good question now...any one in the U.S. have one..??? How'd ya get it?, and do you read Russian?

Wow, quick reply, you must be a work also....hahahaha.. http://forums.eagle.ru/showthread.php?t=135851 I'm trying not to hyjack that thread, I made a comment there that I was liking the looks of the Mamba and couldn't find info on it. As of this post, they are not available, not programmable like the HOG, and no parts for it as well, if one needed some. It would seem I'm perpetuating a rumor with no facts. I'm expecting him to reply with a link to where he got it from and post it on this thread. If this is available from some where, send a link to it on this thread. If this rumor is not a rumor, I hope its not Ebay or Graigslist.

To avoid Hyjacking this thread, will you respond to the thread that I started, I'm considering the Mamba, and have many questions. So far I've not the notion that it will fit my need where the TM hog does. http://forums.eagle.ru/showthread.php?t=135957

I'm looking for Virtual Pilots that have this to see what they think of this in replacement to the TM WartHog. I understand this is in fact available, more info shortly. I'd like to try find out how its programmed if it is. My Affair with TM is the TARGET Script editor. Saitek has an "editor" I tried it once, just before the Hog came out. Yes, I can say it sucked. I quickly snatched up the TM HOG and the Scripte editor and have been hooked since. Now the Hog and TM have parts issues. I'll continue to fuss with the Parts if the mamba is not programmable. If it is I see no evidence of it on the website, its worse than the company I work for, hahahah. Basically, in short. Is this available some where? <this implies to past a link please(funny I have to add this)> What can you tell us on this In your opinion against what you've used in the past? Does this have a sort of editor to program the button like the TM has for the HOG, or does it use only DX codes? http://flightsimcontrols.com/store/joysticks/vkb-fat-black-mamba-for-non-eu/

You'll be fine, I have a love/hate. Plastic guts hate, scripted programming love. When you calibrate it, try not to get that extreme edge, just go till you barely feel the end. There is no gate to stop over travel. We really never get to the edges that will stress the Gimbals nor the Pressure Cap when we fly normally. Only when we calibrate, just don't over do it, best to go not enough than too far. I"m not privy to any new releases, if you got a link to a hint of such, I'd love to see it. My flight lead "LOVE'S" his, I must also mine, or I wouldn't be writing this and looking for parts. I'm trying to make a new pressure cap and its not going so well.

Be advised; TM has no parts for the warthog If new sticks are assembled today they are using up inventory of broken parts, with no intention to make more. buy it new today.....Nop, find or make parts for it since I already have one....Yup. I've been trying to get a FAT black MAMBA, but these are no longer made, I'd be in the same boat had I bought one 2yr ago, ...or would I??? For what ever reason TM WartHog is still the best out there. We must face it, there's just no money in this. Get an aircraft with a steering wheel, and we have options. Yup, I'm a little pissed off about it and if you read this whole thing, Thanks and remove the white centering ring an inspect the Pressure Cap for me.

We'll just wait one another out then:book: If we're both good, I'll need really bad, and you'll still have it. hahahahah Till then my friend..

All works most brilliantly. Forgoing the yellow box, I can trigger again to close the popup, it saves the file fine, I press trigger and get a new shot then trigger to close and save. (this not stated in the manual that I could find). MGRS as expected showed up fine, we will need to discus file name at some time though. This is with a quad monitors with Lilliputs, the setup was real easy, and taxed no gigs. This has been lots of fun to work with. https://drive.google.com/open?id=0B8skSfT-PBecaU40bUk4OWFxa3M&authuser=0 By the way, I was able to save the shots by changeing Storage=.\AriesWings in to Storage=D:\Aries_TGP_Snap_Shots, Oh, and the Default will put them in C:\Program Files\..\DCS World\AiresWings

all seems to be working again after: uninstalling: DCS TeamSpeak Aries Tacview Reboot Norton registry flusher (no evidence to suggest this did anything for me) Norton with firewall off, web protect off, silent mode Re-enstall with Admin rights on all DCS, (no _Mod/JGSME) 1.2.1 TeamSpeak 3.016 (64b) Aries (not even Opened the Com Quality tool I assume its all default) 1.955 (Quick Install) Tacview 1.2.8 Reboot Norton back on the perch I have yet to add JGSME and the _Mods folder, and later I'll booger with comm's quality. I'll need this to run with out issues for a few days to prove I've overcome my past issues. Others that were in the TS room that were not in a pit could here me, though me not them(as expected). They could here the comm's quality and thought that was pretty cool, we may have some new DCS'ers on the way. So long as I Mic Aft to set the dial to INT, I could shift+Mic forward and rearm, I turned Aries volume all up, and checked the Volume panel in the pit all dials were full clockwise (volume Up), I was able to AAR so long as I Mic forward to set dial to VHF, then shift+Mic Forward to "ready pre contact" the fus is to check that dial and be sure the volume's are not set to low when entering the pit.

I send you a PM with an appalling offer. I have something I'm working on hopefully for us all, so I have to watch my expenses.

No, Your correct, the image I've no doubt will be there after I open the file to see if this is the one in my proposed path. I'll set my L/L to MGRS and take the shot followed by 20 some others(hopefully). I've had to suck many-a-egg in my day sonny..hahahah I was trying to avoid opening all those files. Ya see I could filter for 38T34???18???_I4230*.bmp. All I see now in the list is targets in that box in the year 2014 on the 230th day. now I can make a smarter mission plan before the targets drive away, and archive the week old ones, again I have bigger fish to fry(more on that after tonight), I can't take the pic if I wanted to at the moment Sooo. The way the naming stands works fine for now, and later we can make it better. This is a very useful device and I for one plan to use it. Good stuff guys.