stenji

Ok, thanks... I'll give it a try

Hello, I am sorry for bothering you but unfortunately mission 2 still has some bugs. Often happens Smoke start circling around the carrier after the launch (Angels 2) while I am still between waypoint 2 and 3. When he does not do that and comes to my wing we proceed to AAR but once I disconnect from the tanker and I go for the Ice/Rain button I hear he asks correctly for the pre contact putting himself in the right position for refuelling, few seconds later, when the contact is not happened yet, while he's still approaching the Intruder, starts banking and moving on the south east. I checked the mission plan and the refuel waypoint for Smoke is not matching with the Flip's but is ont he north east position from the carrier initial point. I think the mission planner for Raven 7.2 needs an update.

Thanks for the hints guys

Anyone can suggest me a USB hub (a budget one) good enough to plug my 3 MFDs and my track IR with webcam? I do not know if the power supply is requested or the USB main cable connected to my PC is enough.

No big issue then... Thank you for the fast answer.

Hi, Pontiac 1-2 does not move from the catapult after Elvis and Glory takeoff. I waited kinda 20 minutes but nothing happens. Ghost and Pyro are stuck on the deck on cat 2 and so the mission for the alert 5 planes cannot begin. Am I doing something wrong but waiting sitting on the Martin Becker for a wake up by a radio call ?

Same issue here

@Reflected To be honest yes... I am still at the "spraying and praying" level so far but hey, that's my problem. Anyway I clearly understand your point and I'd like to congratulate for your great works on the campaigns. Thanks for the video embedded which gives me a way to learn flying the mighty Turkey better.

Well, for sure I am not a pro F-14 pilot, specially in close dogfight, so I am happy playing Zone 5 to learn how to fly it better. My questions are: 1) I saw a video where the F 14 could shot the F 5 when the cross on the HUD shows up. I thought the cross was sort of "not to" like in the F18 HUD. 2) In the aforementioned video the bullet count was 670. Mine is always zero. I eventually can fire but the Rounds display is always 0 from the beginning to the end. How it comes? Is it possible a previous version of the game related to that video was different? Anyway after few bursts my M61 stops firing like I really am out of bullets, is it normal? Wasn't it suppose to be training? So maybe having "infinite rounds" just to simulate the "Top Gun" hops with virtual bullets could be better, don't you agree?

Actually I installed it in both the main and the saved games folder. The message appears every time I launch DCS on PC even though I can use the app normally with my tablet. I am waiting for a new DCS update so it may delete extra files from the main path...

Same here.... Any help?

Ok, thank you but I have no idea how to make a custom write folder....

Few questions from a newbie.... 1) can I play on my own dedicated server with one DCS installed only? 2) Is there a manual/guide to correctly setup your amazing app for whoever wants to play on his own dedicated server?

Thank you escaner, it works like a charm!

Anyone? Same issue here....

Thanks scommander2, the issue is I can move up the throttle from off to idle when I crank the engines but despite the F18 ones, the levers in F14 are not doing the reverse (passing from Idle to off position) and that's because there are no keys to "turn off" the F14 engine I guess.

OK but according to my setup the throttle levers in game are syncronized to the ones of the TM Warthog Throttle. So when I start a mission is not realistc I found the levers in a middle position when airplane is off.... Isn't it?

Comparing to F18 which has 2 keys each engine to move to idle and close the shutoff valve, F14 has only a "toggle" button to cutoff so I cannot find the solution to my goal: I need throttle lever in the cockpit moving according to the Warthog. My F18 "TARGET script" is: MapKeyIOUMD(&Throttle, IDLELOFF, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME); MapKeyIOUMD(&Throttle, IDLEROFF, PULSE+R_SHIFT+HOME, PULSE+R_SHIFT+HOME, PULSE+R_SHIFT+HOME, PULSE+R_SHIFT+HOME, PULSE+R_SHIFT+HOME, PULSE+R_SHIFT+HOME); MapKeyIOUMD(&Throttle, IDLELON, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END); MapKeyIOUMD(&Throttle, IDLERON, PULSE+R_SHIFT+END, PULSE+R_SHIFT+END, PULSE+R_SHIFT+END, PULSE+R_SHIFT+END, PULSE+R_SHIFT+END, PULSE+R_SHIFT+END); For F14 Instead I tried those following lines which works well when I turn on the engines but they can not off them: MapKeyIOUMD(&Throttle, IDLELOFF, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME); MapKeyIOUMD(&Throttle, IDLEROFF,PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END); MapKeyRIOUMD(&Throttle, IDLELON, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME, PULSE+R_ALT+HOME); MapKeyRIOUMD(&Throttle, IDLERON, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END, PULSE+R_ALT+END); Anyone has some suggestion on this topic?

Now it works as a charm. Thanks.

According to the Matt Wagner's Case III Chart included in the F/A-18C Hornet manual the Marshal radial should be 15 to 30 degrees off the final bearing. That's not mentioned in the Supercarrier manual and I realized the offset is never instructed in DCS. Will it be implemented and when?

@Minsky Unfortunately, neither GMT or ATFLIR find something. Apparently ther is no BTR shape, only its TAG appears. Even with a fly by I cannot see it.

Well, even at 7 nm I can't really lock the enemy vehicle using FOV in the MAV Display, it looks tiny like a cat. I get closer to lock it on and fire the AGM64-F but, at that point I become a pretty easy target for the the SA-18's. @Minsky Thanks for the hint, eventually I'll do that even if I'd prefer not changing the mission default loadout.

Sorry Badger633 but GMT mode does not give me any track, looks like cannot find anything, I also tried to change azimuth and range with no joy.

Snake trap Mission I usually destroy the first targets with AGM64-E as Axeman request. After that they call me back for help as a BTR 80 is closing to the ground team. I try few times to lock on the BTR with the AGM64-F as requested but on the MFD the vehicle shape is so tiny, even with FOV selected, so I have to get close....less than 5 nm and below 12000 feet to acquire the target with my Maverick's uncaged aiming cross. That results is being an easy target for the SA18 positioned not far from. I sharply turn and release flares as a devil but they always get me. Where am I wrong?

Don't know the reason but suddenly the 2nd monitor and the ipad where I run the f-18 app begun stuttering. Tried to play with g-sync, monitor frequency and so on, SCPS and Image quality on the DCS Device Server but nothing changed. It is quite awkward because I used that app since 2021 and the problem showed up only the last month but I cannot find a way to get rid of the problem. Advices?