firefox121

Try this mod, it used to work by reducing texture load at apache cocjpit, you can downgrade textures to middle or Low without loosing labels and readbility and with an average increase of fps Don't know if still works https://www.digitalcombatsimulator.com/en/files/3321192/

Try to see if there is enough light on room, and cameras are well cleaned,sometimes with a bad lighting the headset looses tracking...

I downloaded the install packages for wmr and wmr tools,just in case of being removed from store. Hope that I could install the packager after the upgrade.

try to check if the wheel brakes are applied by default, and if you have enough room make a rolling land. Hope it helps

Think you can find some info here : https://www.thingiverse.com/thing:1767844 or at least obtain the diameters etc. Also see this https://www.thingiverse.com/thing:3872441

Question? If DCS starts with ultraleap software enabled you must check two things: -1st make sure that you have selected at ultraleap settings openxr support and allow images -2nd at DCS misc tab enable ultraleap , and disable in VR tab the hands controls. it must run, if not, you must download an older ultraleap dll and put it on the dcs-mt folder I uploaded a working revision at my dropbox, but I don't know if you can download from there. Try this link, if it doesn't work PM. https://www.dropbox.com/scl/fo/adoz885sntld50ov25nyy/h?rlkey=wrey7lon2ckp2nfayahjhjs0a&dl=0 null

Tree silly questions : - Did you try at windows 11 on system , screen menu to identify the screens? - nullDid you try press "win+p" and project screen to other monitors? - At your BIOS settings, how is your graphic adapter configured, PGA(Primary Graphic Adapter) or your Graphic Card?, you must select for graphic adapter your graphic card not PGA motherboard adapter. - Also check tour HDMI cable, lenght and 4k capability.

I mean something like this : I use velcro on his soft face. works more or less well, it creates enough resistance so the joy wont jiggle when touched.null

Is so good or so bas as your headset and rig capabilities are, for me, I fly the module in VR with a i9-1850k, a 3080ti and reverb G2, , I can achieve solid 45fps, the module demands more or less the same power than the AH-64, but feels so good , beacuse his great transparent cockpit, so the sense of speed is superb at low altitude.

Thanks, I did some researchs, and found that you are saying, now I have a great icon folder, but I can't find time and courage to inmerse me on programming layers and folders, no time for that, also I fly VR so is useless in this way

Hi, I have the live one, I bought it because of the rotarys, but the loupedeck works different to the el gato streamdeck, i mean : As far as I know, the device can't read data from DCS, like el gato does, so , in a best way , no need of luas and the programs to extract data from DCS, so less resources consuption, It has a plugin that works with vjoy , so you can send a joy press button or a rotary like directX joy input.... that allows to assign every button joy input, 123 total to a function at DCS,. In the other way, programming is a bit tedious, because you must design each page for each function (for example a page for radar, other for panels, other for landing gear and this kind of stuff) and even you can asign diferent position buttons , if you press the equivalent at the DCS screen , in your device it will not change because you are not reading data from dcs, if ONLY press the loupedeck buttons it will chage according to the programmed. Don't know if I explained myself, but is a great device, (i use it also with photoshop , davinci etc) but lacks of profiles. This was the purpouse of this thread, to jmerge profiles from all loupedeck users.

Pm and will sent you older drivers. I stored at least version 5.12 . Will try to upload to a shared dropbox folder and post link https://www.dropbox.com/scl/fo/adoz885sntld50ov25nyy/h?rlkey=wrey7lon2ckp2nfayahjhjs0a&dl=0 Let me know if you can download files, I am new to sharing files at dropbox. If you can't will try other solution

Did you checked than no other controller is asigned to the MAN TRK, and giving wrong inputs? also uncheck at options tab the calibrate at start button....and when enter simulation move the slider up down to recenter it. This might solve the problem.

Of course, I mount it on my left index finger , so the optical sensor points owards, not need to config buttons, only some practice, but if you can't use it there is a program named xmousebuttoncontrol that allows you to reconfigure all the mouse inputs and swap them. you can find it here https://www.highrez.co.uk/downloads/xmousebuttoncontrol.htm

I use this mouse finger mounted, found at aliexpress, works fine with my leapmotion and even without it, only with fixed cross at center ot the screen. The center is rotating wheel mouse and the other two buttons are mouse buttons, very cheap, 10-12$ or less, only the long time for shippong (a week or two). It can also be found at amazon.

This workerd for me.... I have a winwing orion hotas, so I binded the movement to axis, I discovered that If I do this....the problems that you describes starts, no recentering etc....so, I assign the movement axis to keyboard strokes, (winwing can have axis and buttons at the same hotas), at this moment, the recenter button works perfect, so if you can't bind buttons to your axis like me, only have to press the key up, or down,left or right assigned to move the vivian at your keyboard and instantly the center button should work fine.

As far as I remember, the x-56 joystick has a twist axis that can be bounded to rudder, you must make some curve setting in order not to be so sensitive... So you can bind rudder axis to your siteck joystick z axis.

Here is https://github.com/Thx1010saascas/GameControlPlugin/releases

At winwing with shker enabled could be two things. -One, not enough power at usb, try a powered one) or Usb not configured to be always awake, try to look at device administrator, at usb and in all the usb devices properties unchek the "allow this device to turn off in order to save energy" or something like that. Mine is in spanish!! -Two : any kind of trouble at scrip winwing lua when simapp is running, (personally I dont use at my orion f18 winwing), remember hd to edit a param in one line refering to the miliseconds..check winwing forum

I mean this buton, at sidewinder ffb 2 must be ticked in order to feel the forces right. Other thing that you can check is your preferences at windows joy panel , With my sidewinder is not an option because win11 does not provides support, only forces but can't be adjusted like wheels etc , where you can change the force amount, the spring force etc.. If all of this fails for you, search the simFFb app at githubm and install, there you can assign forces even change profiles to see if that behaviour goes better. My sidewinder works well, but , it has a center dead zone where the forces does not works well (almost none) and with the apache is a bit disapointing due to the behaviour of his computer and the autopilot stuff. (a minimal input disenganges the control) , I solved it by attaching a rubber tape at the stick gimbal, so it adds friction and the joy stays wher I leave it without no movement. Hope it helps r

If I understand you will solve it by assigning at the axis controls tab, when you select your device, press the focefeedback botton and see what forces are assigned to compensator and to vibration, If you set the compensator force (The first one ) over 50, the joy will jump when you release the trimm (on choppers), vibration has no effect. Also at Specials tab, I discovered that setting trim to "default(ffb friendly) not to "ffb joy without springs" this behaviour is less noticeable. This is on my sidewinder ffb2 , also , in this joy, I must select "inter axis" to feel forces right. Think that at Logitech G940 must be disabled. On planes the compensator force works well betwen 80-100 (as your preferences) and vibration too. But when flying choppers always 50 or less If you fly also the gazelle, make sure at special tab to enable "use his own force feedback" or something like that and "ALWAYS" the two sliders that refers ffb to 0, if not your joy will jump over the selected trim position. Hope it helps

Tree silly questions: - have you checked the axis page? sometimes the cyclic axis are assigned to more than one device that may induce some kind of anti responses.In my experience , the x and y axes was assigned too to the rudder brake pedals, so any minor input at the pedals changed my joy position - Are you sure the bindigs are made at the pilots page not at the weapons officer page? -Make sure your trottle imput is set to maximun, if not. helo does not take off due to lack of power.... If nothing of this works, try to delete the apache inputs folder at user\your user name\blah blah blah...... and restart DCS so yhe apache will create new device inputs.

Here I post my set of icons research to use at DCS. If anyone has more icons feel free to share with us. A sample of the file content.Total icons 346. Researching more for every plane and chop. ICONOS DCS.rar

If you want custom icons must do this: First of all at game control create your press joy buttons button 1, 2 3 etc....whathever you want to use... I recommend to create more buttons than you need Remember the ction Button press then at fields 1 and 1 step 2 : press custom assign step 3 : press multi-togle-action, will show you a window to assign That says drag action here step 4 : press game control again, so you will see at the top your created buttons. step 5 : drag your joy button to the action, I recommend to do this from fist to last, so every action will have a button press . step 6 : click add step 2/5 and repeat the drg and drop action. then save, so you will have a only button with two stages. Then only rename the multi togle to gear for example, drag an drop it on your loupedeck screen an edit the icons as ypu want, the first for example up, and the second for example down....I use these two, but if you want more icons pm a private So when you press firt time gear will go down(if you assign the key in dcs to gear down) and loupedeck will show the gear down icon and when you press second time (and assign the press to gear up at dcs) you will raise the gear and icon will show up. Hope it will help you

As far as I can remember there are some keybinds allowing you move the IHADS apache as you get confortable, not sure if you are talking of this...