ponch17

Dear all Since the latest update of 2.9 track seems to be much better when we replay them but I still have an issue. When I use the F14 all are going well on the replay but after a while the jester wheel is open. My action was done correctly but the menu remain open the track continue as it's supposed to be but with the jester wheel open . I am the only one who have this kind of issue ? I use it with Track IR and I switch on my hotas to open and close the menu thanks for your help ..

Thanks for your help I find a bit more of my problem it’s not about bindings . To remove my problem I need to uncheck "Synchronize cockpit controls with HOTAS controls as Mission Start" but i dont understand why as nothing on my controller are linked to autopilot channel well it’s weird I try a repair no change .. so i will try to search more into this direction and see if I find something .. But what could turn all AP in off (red) ? - engine RPM goes low under yellow line also giro start to flash red and fan stop - gen are off same stuff giro is red and fan stop -what again ??

Dear all Not sure if I miss something but I am unable to turn AP Channels ON no one of them goes to green from a cold start so to be sure I take a free flight mission a DCS one I start inflight and it’s the same all channels are off and impossible to turn them on . Is that me did I do something wrong ? I check key bindings all is set correctly, even with the mouse it doesn’t t work . ?? is there a bug here from last update ?? Thanks for your help

Guys Thanks a lot for your knowledge .. that s the answer I was thinking to get thanks again

Dear all, Quick question about P47 .. well I très some ‘’dogfight’’ I Knowles itvs ont réalisé Maude for that but I select same cat target or I try to do ! For exemple I use the instant action mission against A8 . Se we are at around 3500 ft that mean below 7000 where Turbo boost needs to stay off .. but that mean no access to WAR power with water injection without the turbo and fighting is really hard without .. the question use is standard rules are no turbo below 7000 ft for normal operation and all is allowed for fighting ?? Tell me how you managed it .. ?? Thanks Julien

ok I try to recreate the scenario of the GCI CAP on the Caucas map from scratch I place and name all unit then edit the .LUA file it doesn t work .. so I do something wrong but what .. ?? so if someone can help me to debug this it will be a good help jul-caucas-test.lua test-gci caucase.miz

ok .. I found the name of the airport here so it should be right https://flightcontrol-master.github.io/MOOSE_DOCS/Documentation/Wrapper.Airbase.html So I will try to create the exemple from scratch on the caucas map to chek if it's work or if there are something wrong on my build then see if a problem on syria or if I am the problem ..

Dear all i try to reproduce a basic Moose exemple ( we can find it inside msater mission folder ) AID-A2A-700 - Sound Check English.miz but it's not working when I try to reproduce it on the Syria MAP and I don t really understand what I do wrong ? When I start the original exemple all is working well with my mission I get nothing there my syria mission and my Lua file if someone could help me it's good .. I try to run a server and it's kind of the base of my mission of course Thanks JUL-syria.lua test-moose-syria.miz

I have the same from last update .. if i Want use helmet system to designate a ground tgt i got this circle with somme Lines around it then i can select my tgt . But impossible to undesignate with NWS switch to get this circle again to select an other tgt .

Awesome It's work pretty well many thanks

dear friends I drop my question here because I am not really sure if there are a better place So i have a dual monitor setup and i export all 3 ''MFD'' from the F18 to the second screen it's working well i just make all my modification on the viewport.lua about size and placement nothing to say it's perfect now I wish I can add IFEI data on my second screen too .. is that a way to do it without installing helios or any other secondary application ? thanks for your help

Hello thanks for Your help yes problem solved in DCS I need to Turn almost a full turn to detect it then wehn i use the zoom it Work perfectly thanks for Your help

Dear all I the new happy owner of a KA50 collective all is updated in the simapppro firmware are also up to date all axes and switch are working well .. but the grey thumb wheel are not working even as a switch up down or as an axes nothing is detected well I am probably sure I miss something but I don t know what .. if someone know something it could be great also from the app side .. I didn t find any ''cloud'' profile .from other people it seems weird but as I didn t find any doc to let me go deeper inside this app it's not easy thanks

hi many thanks for your help .. so I will add trigeer with group AI on OFF to manage the group it seems the easiest solution ! I will try the code work on the mission and see how does it works Again thanks for the help

Dear all I try to make a training mission with different mission to set the first one I want it like this when I fly over a trigger point ennemy unit appears for a specific time 15 min or more , then disapear if I re fly over my trigger zone ennemy appear again ( like the first time ) I try to do it this way but when i fly over my trigger zone nothing appears again .. if someone can help me Trigger are on mission start = set flog 1 off repetitive = when part of the group in zone X = activate groupe / flag 1 ON =message ''groupe activated'' repetitive =flag 1 time is more 60sec (that s for test ) = deactivate group / glag 1 OFF it's work well after 60 sec groupe disapear, but if now I refly over my trigger point I get the message ''groupe activated'' but no enemi come back I don t understand why so if someone now .. Maybe i don t use the best trigger or maybe my solution is not the best one ?? I put the test mission too The goal is to put the mission on a server so it should run for a long time and restart or reboot sometimes but supposed to be a no end mission Thanks 44_moltes_training range.miz

ok good to know .. of course I really like it the cockpit looks nice good vision, all is almost under hands , instrument are visible and at the right place it's one of my favorite aircraft ..

Well Against AI it's ok as they repeat almost all time the same tactic but well they have eyes at 360° and flight pefectly at the limit of the airplane .. so it could be difficult .. :)

Hi I do a quick video And some time I am in a high pitch rate and i think i start to loose lift and (stall) start to roll on a wing. But If I set flaps 1 it's better but I loose speed/acceleration. Question is ON SIM: is that more easy to use flaps one sometimes in combat or flaps 1 during all fight REALITY: when I see where is the flaps lever in the real p-51 I don t think it's made to be used in fight, right ? thanks for your help

Yes they have torpedos 2 each (it's a group of 4) mission is anti ship strike is that correct ? yes it's red airplanes against blue ship so it' seems to be good Target are 4 big ships but they are moving .. and i just saw in the latest change log ''Torpedoes from U-boat or S-boat could be fired to unmoved targets only'' ok not for JU but I will check again .. not easy ..

Hello I try to build a mission I place 3 ships and 4 ju 88 are supposed to attack them I set ''antiship strike'' select the right ship group .. there are no other plane nothing ! but the the ju 88 team turn back and go for landing when they reach the last waypoint where the anti ship run is supposed to start I also try with ground attack .. but it still the same so is that possible ? thanks for your help

Well as i speak french if it s like SIRI or this kind of stuff i Would be killed before get any help for my buddy And the Sd XL have 32 keys with many layers so not so bad for almost everything Thanks

Hello quick question I try to match the communications key who are almost the same for each aircrafts but i have a small issue exemple: ''attack my target '' LWin + B (maybe not B but not important) in game when I type this combo in my keybord on a spitfire it work I hear the message on radio and wingmann confirm . By pressing the shortcut on my streamdeck nothing is working .. I have the latest software and i use '' modifier L + R '' is check did someone have the same issue ? thanks

Hello Some questions about replay track .. something I found is if I use dcs bios to make input in the F18 track is not usable it's like if all inputs from dcs bios are not seen ok I can understand So I try without DCS bios better but far away from ''good'' i will say. So I try some more tips like start a mission in multiplayer in a privater server and then repla it ! but I can see all airplane except mine is that normal ?? because in this video it seems to work

:megalol: nice landing by the way ... :joystick:

Thnaks Jester you are right I unzip the file but it was in is own folder .. I was thinking it was ok so I remove the wrong folder and now ... no more error !!! Many thanks good job Jul