undctiatc

I had the throttle friction somehow set to zoom...annoying little keybind. thank you!

Greetings and salutations, I am usually flying the 18 or 16 and the camera with track ir is fine and will allow me to zoom in/out just fine. I load up the a10 (a, c, cII doesnt matter) and the camera is zoomed in all the way. I try to zoom out with the default zoom numpad key and it will zoom out a little then reset to all the way in. I pause my track ir and it will act the same. Once or twice it will zoom out all the way but then it will snap back to zoomed in. Is there a setting I need to mess with in the a10 settings? I cannot imagine it is the Track Ir settings as it works just fine with the 18/16/mi24/ka etc. Thanks for any insight! PJ "That Fat Pilot"

Hello all, I recently updated dcs from about a 2 year hiatus. It looks really good with the updated textures, however, I am getting these weird little black lines flashing all over the runway or tarmac. The flashes only happen at airports. Roads/buildings/object not affected. The area immediately around the plane is fine. But once you get a few feet from aircraft they start the flashing. I'll try to upload a picture/video once I get home. I have an gtx780 with the latest drivers. I'll try to update/fix dcs files incase they got corrupted and update. Thanks for any help.

Hello all, Been awhile and I just reloaded DCS a10. I started up the game and almost had to shut it down as soon as I got in the cockpit. There are little black lines flickering all over the runway and apron surfaces. I have an Nvidea GTX780 with the latest update. No other textures flicker or have any deformity. just runway and apron. Thanks for any help.

Hello all. Just updated the DCS World app, non steam, and I click to load the mig29 training missions and the game will start to load the mission flicker load a little then flicker back and crash. Then it will go back to DCS World and say the debrief flie cannot be loaded. Here is the data from the windows crash: Problem signature: Problem Event Name: APPCRASH Application Name: dcs.exe Application Version: 1.2.10.32582 Application Timestamp: 542c1d3d Fault Module Name: MSVCR110.dll Fault Module Version: 11.0.51106.1 Fault Module Timestamp: 5098826e Exception Code: c0000005 Exception Offset: 0000000000059183 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: c740 Additional Information 2: c7409a7050167d58aafd537f80f17983 Additional Information 3: ed8b Additional Information 4: ed8b50c7bf76ea0d110c70b61b30343c I have ran the updater 3x now as an admin, I have also ran the repair 3x as admin. I run all the exe files as admin. The Su33 mission worked just fine. I followed the sticky note at the top of this thread and nothing changed. Any help would be much appreciated! My System: Intel i7 4.33 16gb Ram GTX770 Windows 7 x64

Hello all, When I run out of things to shoot at enemies, my buddy (using multiplayer) will come in and shoot things. I have heard/seen that you can laser designate targets and have other people shoot them. I asked him what laser code he has in and it was the same as mine (Default 1688 ) and I slewed my TGP over a target set it as SPI and Point and at first I was pressing and holding the Insert key to lase the target. then i tried with the "latch open" setting: 1. With the latch closed I have to press and hold the insert key correct for the laser to fire? 2. How do I tell that the laser is on and designating the target? 3. How does my buddy find and target my lased target? (I remember reading that he needs to be in the LSS setting, however we were both on the same target for all i know and he didn't get any indication. 4. what indication will you get that the target is indeed targeted? Thank you very much for your help.

hello all, My buddy and I have been playing this simulation now for about a month and we are ok with it. there are still several things we do not understand or a situation will pop up and we have no idea what it means or what to do about it. Here are several things we have encountered and would like any help that you all can give: Co-op missions will not show complete or let us know the objective has been completed. for example on the CSAR co op mission before I changed the helicopter routes, the helicopters would get caught in the mountains, now they actually make it back to base. They pick up the downed pilot and leave the area. My buddy and I will fly around and destroy pretty much everything. Nothing happens, no completion or anything. IAM LAUNCH ABORTED Had this happen to me tonight. I was launching CBU-105 naked (no JDAM info) and they were killing stuff, but after two that aborted message shows up and I have no idea how to get rid of it or what it means. Autopilot switch will not stay up after departing until after the 2nd or 3rd waypoint then it will say on. Lights wont work if you start up cold Radios I will turn the radios on just like the tutorial, I will set the freq and if it is AM i will change the dial on the radio to am and on the big dial of the intercom i will change to FM or vhf. Neither will allow me to contact the tanker/awacs or other aircraft. how do i get the radios to work? The options for the tanker/awacs is always blacked out no matter what freq or am/fm/vhf/ blah blah blah Is there a way to move the HUD visuals down? I see the horizon and maybe 2-3 degrees up and 30 degrees down. is that normal? When using laser designated GBU's, I turn the laser switch on, I lock the TGP on Point, its tracking the target, I have the laser time set to 20, laser in the profile is on just like the tutorial. Do i need to hit the <insert> key to lase the target for the bomb or will it do it automatically. I ask cause my laser bombs are always 10-30 feet off target. Once in a great while they will actually hit. I apologize for the many questions. If there are places for me to look up information i would appreciate a point in the right direction. Thank you for your help!