5EVC Tiger

Ok, I'll be more specific. NWS not working anymore, I get it. But what about the Comms key "\" or the Radio PTT keyboard command ? How do you access F10 menu when airborne ?

Unable to use the F10 Radio Menu with Nosewheel Steering button when airborne anymore.

Always !

I retried this mission last night. Same thing. See track attached. I noticed Paco making a very shallow climb and levels at FL240 and not 250. Paco stuck at FL240.trk

I just added the Tacview file to my post.

I do not know what trigger doesn't kick in but after Cat 1 launch, and getting the instruction to rejoin with Paco, I kept flying overhead Mother with Paco for over 1hr and nothing happens. Tacview-20240403-185223-DCS-Speed and Angels - 12b.zip.acmi

Tried Mission 2 in the last couple of days. On my 2nd try, Biff did not taxi at all. I might have been taxiing a little fast though (25 knots). The first time I tried the mission, Biff started taxiing when I was taxiing in front of the APRON where the Strike Eagles are. On the approach after being instructed by Approach to descend and maintain 5000' , radio-silence.

Just "completed" mission 10. Same problem describe above and here : After 2nd attack Sluggo just leaves and RTP and nothing else happens. I have a recorded DCS & TacView track if needed.

This is just a glitch to report. This is certainly another ED outstanding AI programming logic but by mistake I let BIFF taxiing before me. I just followed him. After T/O and when airborne, he probably figured out that the best way to follow me just as I am doing my T/O roll is to plunge towards the ground and to crash. Then, no more comms or instructions are provided... By the way Baltic_Dragon, I think this is by far the best training campaign out there. Congratulations. It really su*** that ED jeopardize your excellent work with so bad AI.

Push +1

Sounds good ! Exactly the same issue occurred with the ATT Mission 01...

Same here, BIFF, lands runway 21R than taxi on a the grass across runways. We both make it up to our parking spots but the instructions stop there... I parked next to him but no more instructions are given.

+1 for better Nevada night lighting

I position on the runway. The instructor reports he is evaluating my pre-T/O checklist. As soon as he say that, start rolling, ram right on my right wing and give me s*** for damaging the aircraft. Like in my post before on the Training Mission, I recommend locating the instructor "in the tower" or in a vehicle by the runway threshold somewhere with his comms.

Is it possible to get rid of this instructor-wingman ? He keeps crashing right in front of me by the runway threshold on landing and when he does, the shrapnel coming out of his flying donkey hit my plane and then I get accused of damaging the aircraft. Recommendation: pretend the instructor is in the tower with an handheld radio to give me s***. That way you won't have to cope with AI wingman non-compliance with basic realism of ED outstanding quality of programming

Mission 03 - DCS Crashes at Loading Am I the only one experiencing that ? When loading mission 03 (following mission overview/editor) DCS will crash during loading. It happens at each trials. My latest version of OpenBeta has no mods. Any ideas ?

Since upgraded stable version to 2.7, I got a similar problem as what is discussed in this topic : Red exclamation mark in bindings on A-10C II only - Page 2 - General Bugs - ED Forums (eagle.ru) This happens solely on the F-14-Pilot controls bindings. Specifically on the rudder and "throttle both" (which I don't care). I have a red exclamation marks next to both commands axis. My rudder device is a Saitek Pro Flight Pedals. I can see the "Joy_RZ" assigned to the rudder but there is no movement detected. I have to "Reset the combo command to default" then the Joy_RZ axis gets detected and works properly. Just annoying having to do that every time I load up DCS. Any ideas ?

I suspect this is related to my recent Reverb G2 experience on a build change. According to my MB manufacturer (MSI), the USB-C port is capable of providing up to 7 watts of power. However, the Reverb G2 is gluttonous on power draw from the USB port even though it has an additional power pack. My MSI MB would provide barely enough power to make the G2 display working well but having the sound disconnecting and reconnecting all the time which caused drivers and software issues. Like MSFS 2020 being unusable in VR for instance. Fix: I bought a PCIe 3.0/4.0 USB-C internal card that is able to provide up to 15 watts of power. Hooked up the G2, all problems gone ! Your situation is similar, I would definitely give a dedicated USB-C PCIe card a try.

This came to a surprise to me as I did not think DCS World was that CPU-bound. Old build: EVGA Z270 Stinger Intel i7 7700K @ 5.1Ghz G.Skill 3600 CL16 32G RAM EVGA GeForce GTX 1080ti FE HP Reverb G2 New build: MSI x570 Gaming Carbon Pro AMD Ryzen 9 5950x stock G.Skill 3600 CL16 32G RAM EVGA GeForce GTX 1080ti FE HP Reverb G2 With my former build, when sit in the F-14 cockpit on the supercarrier in the Persian Gulf the CPU frametime would show between 30-40ms with the GPU showing pretty much the same, sometimes more. The GPU would be running at 85-95%. With the 5950x, CPU frametime down to 15-20ms and now the GPU shows between 20-30ms... Same in game settings. My GPU now running 100%, the poor thing being force-fed with data !!! Therefore, if you're looking to upgrade your rig, I would have a close look at the CPU first... I realize now what a CPU bottleneck would look like.

Same Prince-diving-into-water issue here - Release Version.

Bug Report from DCSFP DCS Installation : DCS World OpenBeta DCS Module : FA-18C_hornet Saitek Panel : PZ55 Switch Panel Has it worked before? : Yes DCS-BIOS Status? : Works fine Is this DCS-BIOS related? : No Related cockpit control/device/gauge? : No Key bindings seem to be held down when activated using DCSFlightpanels_x64_3.6.51. Works fine with DCSFlightpanels_x64_3.6.17.

Not, just on OB, the release version shows the same problem.

I have the same issue with mission #1. In addition to this, CHEVY6 flight, which is supposed to relieve player's flight, taxis only a few meters and then stops. Obviously, blocking all other flight to land and as the player comes back to land, Nellis tower won't authorize landing.

This bug have been going on for several months and versions so far. I have HOTAS Warthog, Oculus Rift and HOTAS advanced programming key bindings. For every flight, it works fine at first but after a random number of minutes, all key bindings stop working and I have to switch from DCS window to another one, than switch back to DCS window to find my key bindings working again. Extremely frustrating when on a bombing run and unable to release at release point. I think I have been able to isolate de cause. It seems to be happening when closing in for flight formation with other aircrafts, for the tanker for example. When it triggers off, it's like the "L_SHIFT" key is continuously held down. Any idea ?

I still see the same thing. Very first mission (the one when the air group deploys to Georgia). Number 3 and 4 collide in the pattern every time.