Bewsher

3rd party software used for joysticks,pedals etc. Also control panel is windows control panel to clarify.

Just adding this. Make sure your equipment is properly calibrated in control panel then calibrate with 3pd software after.

This is how i create a basic JTAC mission with the F-5E A-10 etc without tpod or other pods. To use Tpod on Harrier requires looking at the manual. 1. Create CAS mission With desired aircraft. 2. Put Hummvee TOW only down in enemy territory. Then do the following. Put targets down nearby Hummvee TOW. For noobs put down somewhere near an airfield or location that you can roughly see it. Make sure its laser has line of sight. Then selecting advance waypoints for Hummvee TOW as follows in order. 1. EPLRS on. 2. Go invisible. 3. ROE = Weapon hold. Even though it is invisible and wont get shot. It seems to need this to fire laser. 4. FAC and assign group, Weapon as Auto then for guided bombs use laser designation. Then 5. Click on your aircraft and make sure Radio frequency in aircraft is set same as the FAC ie 133 AM or 131 AM. Set it in advanced waypoints section. 6. Make sure Target is defined as new group 001 not new group 002 etc. (Important as re editing mission can change group numbers later edits). Last 2 JTAC calls will be to Confirm IP inbound THEN you confirm THEN laser on by confirming that. Finally make sure bombs armed and ready. its been awhile since ive done this. So any other people with better ideas use them.

Put up a couple of new skins and fixed the original one. Works offline but haven't checked multiplayer. See top post page 1.

Great.

Thanks for that info. Re saved the files to place into that temptexures folder. Glad it can be done.

Ok as i dont have the mirage module youll have to look for it in the texture directory if it has one. If not then its just dropped next to the zipped a10 weapons directory. Or unload and reload the gbu-12 from weapon loadout then save the mission. If it doesnt like i assumed ill look into it later this week. Let me know.

Yep Mirage or any module aircraft since its skin replacement only. Dont know if these skins pass online integrity though so backup before.

Both GBU-12 Skins. Just delete the 2 from the zip file before unzipping the second one. Put into Bazar/temptextures. gbu-12 c.bmp.zip gbu-12 c.bmp 2.zip

No probs.

M.2 SSD Nearly 3 times faster on my Z170. Just have to fully install windows to it and disconnect any older AHCI SSD/HDD drives when doing so. Slightly faster booting too. Go with Samsung 950 or 960 pro M.2 Also use windows 8.1 or 10 if possible and grab the NVME driver from Samsung website to make it as fast as possible.

The windows 7 had both 32 and 64 but 10 just has the version you choose. I know im the same on the 32 bit era. Long gone now.

Make sure you get the 64 bit edition of Windows 10 as an iso or OEM.

Using 32 gigs DD4 without pagefile on and it feels faster. Pagefile on its about the same feel with 16gigs. I do know the risks but with a 950 SSD its better.

1070 would give you 1440P on High settings easy if your monitor supported it. My 6gig 1060 does 1080P fast on high or 1440P moderately on high if you have a I5 or I7 with 16gigs. AMD wont fair so well.

Нет, все Томагавк и КРВБ являются 1000 фунтов обычными в SIM. Просто редактировать превращает их ядерное оружие. Если бы их на 50KT но 10KT лучше. Меньше, более реалистичный ущерб (размер Хиросима Nuke размер с помощью набора выход постановки на охрану, как и в реальной жизни) и может быть безопасно сбит с помощью ЗУР и воздуха воздух ракеты. Net, vse Tomagavk i KRVB yavlyayutsya 1000 funtov obychnymi v SIM. Prosto redaktirovat' prevrashchayet ikh yadernoye oruzhiye. Yesli by ikh na 50KT no 10KT luchshe. Men'she, boleye realistichnyy ushcherb (razmer Khirosima Nuke razmer s pomoshch'yu nabora vykhod postanovki na okhranu, kak i v real'noy zhizni) i mozhet byt' bezopasno sbit s pomoshch'yu ZUR i vozdukha vozdukh rakety.

No. All Tomahawks and ALCMS are 1000 pound conventional in sim. Just the edit turns them nuclear. Had them at 50KT but 10KT is better. Less, more realistic damage (Hiroshima size nuke size via dial a yield arming like in real life) and can be safely shot down via sams and air to air missiles.

Agreed. Also keep this in mind that performance varies from max altitude to sea level. Also you can Wikipedia the mach numbers of the missiles and adjust this line too Mach_max = X,X, That ll give the A2A missiles a bit extra kick.

Not that ive found. However maybe it is in there. Someones gotta have an answer if its there.

In missiles_data.lua look for this line Life_Time = XX.X, Adjust the number 2 times higher for increasing missile distance and maneuverability. Works great on air to ground weapons too. Wouldn't try this mod online though. To edit you need a dedicated script editor like Notepad++

Are you using all 6 components of the patriot launcher, radars and powerplants? Also in real life theyre about 20 metres from each other in a oval shap so you have to zoom right in and place them. Just dont place them right beside each other.

Backy 51 or to whom may want to turn the ALCM nuclear change below line in Notepad++ warheads["AGM_86"] = penetrating_warhead(454.0); to warheads["AGM_86"] = penetrating_warhead(20000000.0);

Lol. yup itll kill traffic but military would power through since theyre hardened.

This is how i create a basic JTAC mission with the F-5E 1. Create CAS mission With desired aircraft. 2. Put Hummvee TOW only down in enemy territory. Then do the following. Put targets down nearby Hummvee TOW. For noobs put down somewhere near an airfield or location that you can roughly see it. Then selecting advance waypoints for Hummvee TOW as follows in order. 1. EPLRS on. 2. Go invisible. 3. ROE = Weapon hold. Even though it is invisible and wont get shot. It seems to need this to fire laser. 4. FAC and assign group, Weapon as Auto then for guided bombs use laser designation. Then 5. Click on your aircraft and make sure Radio frequency in aircraft is set same as the FAC ie 133 AM or 131 AM. Set it in advanced waypoints section. 6. Make sure Target is defined as new group 001 not new group 002 etc. (Important as re editing mission can change group numbers later edits). Dont know if it works for the M2000C but give it a shot. Last 2 JTAC calls will be to Confirm IP inbound THEN you confirm THEN laser on by confirming that. Finally make sure bombs armed and ready then you're good to shallow dive and release.

Havent tried the B-52 launched ones. Ive turned the sea launched ones into the A version not the B but they are the same cruise missile. Same here thats why i did it. Only been toying with the idea recently. Also you can do this to the Russian ALCMS too but now you have that balance like you said. Easy to adjust as its a simple warhead not affected by real life weight restrictions.