-
Posts
79 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Jef Costello
-
Thank you very much for your help Kercheiz, I'll give it a try!
-
Hi guys! I'm back in the M2000 since a long time. I can't jettison the fuel tank: Master Arm on, Selective Jettison On, RP selected, I press the trigger and nothing happens! Did I do something wrong?
-
Here it is! F-15E fuel schematic.pdf
-
I really appreciated your "Backcountry182" vids! It would be fantastic if you could do similar vids with your simulated dogfight flights! Best regards
-
That was the culprit. Art-J you are my mate, thank you so much for taking the time to look at my tracks! Best regards Jef
-
Thank you so much Art, I'm gonna check that, may be I've a control assign to the selector and at the start of the mission it synchronizes the position of this selector to fuel.
-
I don't push engine too hard as can be seen in the tracks and even with 1.10ATA RPM in AUTO, oil temp rise at 110°C, the radiator flap is closed and engine quits at this power.
-
I understand what you mean but it happens the same with quick start missions even those starting in flight. I noticed most of the time the engine quits at 1.39ATA. As I can see I'm not the only one who get this trouble:
-
As you can see the temps are ok before takeoff.
-
Another one! One circuit and at the second takeoff engine quit at 1.1 ATA! dcs4.log Bf109k4 messing around engine quit4.trk
-
Here again 3 flights, in the 2 & 3 I removed the sounds mod from Echo19 for the Spit and the P51, switched off MW50 or selected P2 pump instead of 1&2, radiators in Auto or Open. Same result when I push to 1.39ATA. I joined the corresponding DCS log. Please forgive my aerobatic takeoffs Cheers Bf109k4 messing around engine quit1.trk Bf109k4 messing around engine quit2.trk Bf109k4 messing around engine quit3.trk dcs1.log dcs2.log dcs3.log
-
Thank you for your answer. My guess too there is "something" with the oil temp behaviour that cause engine to die. I did more tries at different altitude, til 20000ft, and the problem remains. Of course MW50 is unusable. Please ED investigate what's going on here. Regards
-
I have the same problem in combat with 1.35ATA or less and the engine dies. bF109k4 vs P47D engine die.trk
-
A neues Gwand für die Dora! - Hi Res Textures for the Dora
Jef Costello replied to Doughguy's topic in DCS: Fw 190 D-9 Dora
Absolutely brilliant! It deserves 5 Best regards -
Hello FlyingIron Simulations! Why don't you have an official topic in "Licensed Third Party Projects"? It could really be easier to follow this awesome project there, instead in, curiously, "chit chat"!
-
Thank you so much guys for all your imputs. Finally mapping Warthog first detent on "trigger safety bracket Toggle" works like a charm Cheers Jef
-
Thank you very much MYSE1234 for your answer! So I guess it's better to map the "trigger safety bracket Toggle"?
-
Hello all! I followed closely the tutorial of the RB-75 training mission and after shooting the first RB-75 the EP13 was switched off. I could not put it on again even after recycling the Master mode selector NAV > ANF. Did I do something wrong? Do I have to select another Maverick or it is automatic?Also in the manual, page 320, in the RB-75 check list it is said Master mode selector NAV, which contredict the lesson which says ANF. Regards Jef
-
Ok understood how it works, you simply have to wait till red light stop flashing and green light is on!
-
Thank you kablamoman! I do the controls wipe(More than 20 circles ) after engine start, the battery switch( I forgot to turn it on) doesn't change anything . I forgot to say I use Open Beta and Reshade! It doesn't crash for me in outside view. Cheers Jef
-
I still have this problem and yes I read the book and the kneeboard. Could you please guys tell me if I forgot something in my startup sequence(problably non standard). Beest regards Jef M2000C cold start Sukhumi.trk
-
Did you get an active ILS?