Swordfish

Massive freezes when using a2g radar, not too bad over sea, but when overland, pauses for upto a mintue. FPS about 2. Unplayable. Go to remember to put radar into silent before changing to A2G mode due to lock up and then being able to do nothing. eventually causes DCS to crash any updates on this? Its been the same for the last 2 patches with no updates noted

Massive freezes when using a2g radar, not too bad over sea, but when overland, pauses for upto a mintue. FPS about 2. Unplayable. eventually causes DCS to crash

Massive Frame drops in A/G mode. Happens even if AG radar display or TPOD display is not up. Its worse when TPOD or AG radar is up.

If you shut down and repair, jester starts the startup sequence again, including alignment- using the original start co-ordinates, so if you land and repair at a different airfield or even a different spot on the airfield you started at then your alignment is all ****ed up. this basically mean you have to reslot to a new aircraft on taking damage, such as jester being incapacitated or an engine failing.

Since latest patch, with STT lock, TCS picture is very jumpy, often aircraft is not in the TV window, Target cross on HUD is very jittery and jumping around. Before this patch the TCS was a very stable picture at range.

Noted on MP servers Aim54 are dissapearing shortly after launch, mainly after being unsupported by radar. This just vanish into midair - confirmed by ppl in JTAC/GCI slots and also with TacViews. I cannot get any tracks to play back properly.

Countermeasure Ream not working in MP or SP As per this thread: https://forums.eagle.ru/showthread.php?p=4206193&mode=linear#post4206193 S wordfish 02-12-2020 02:19 PM Countermeasure Rearm in MP Hi, Having lots of problems rearming the countermeasures in MP- used all chaff and flares. I use the ground crew menu option through the radiom order my loadout then go into the rearm menu (not touching the flare & chaff counters as instructed) and get fuel and loadout. no CM ever gets loaded, no chaff no flare. In kneeboard the CM's are listed as being there. Ive tried setting the Rearm menu chaff and flare to 60Flare and 140chaff (as it is at mission start), again no joy. Can anyone help with this? IronMike 02-12-2020 03:11 PM Could you try rearming and refueling first, then reloading CMs with the radio menu? See if that works please. Thanks. Swordfish 02-12-2020 04:06 PM I should still leave the rearm menu flares and chaff alone correct? If they are empty or reduced i mean Swordfish 02-12-2020 05:35 PM Ive tried using the groundcrew menu after rearming - no joy Tried rearming, using groundcrew, then rearming again- No countermeasures loaded again. So basically atm im having to reslot in MP just to load CM's. Swordfish 02-12-2020 05:45 PM also have just tried using the groundcrew menu - again no luck. I noted in the manual if you have a RiO you have to press the reset switch for 5 seconds. Perhaps jester is not doing this? I also tried changing various jest options in the CMS menu- again no luck. Viper 13 02-12-2020 08:04 PM I am having the same issue. Countermeasures are not rearming after I have landed and rearmed in MP IronMike 02-13-2020 03:34 AM But in SP it does work for you? Viper 13 02-13-2020 08:19 AM CMS also don't rearm in SP. Its easy to replicate this issue. My CMS were set to 60 flares and 140 chaff in the rearm menu I took off with Jester in the backseat I was able to drop 60 flares. Landed back at base. Ream menu displayed the CMS quantity at 0 Flare 140 chaff Changed the CMS back to 60 flares and 140 chaff When I took off again I was unable to drop any flares IronMike 02-13-2020 11:55 AM Due to how the countermeasures are in the F-14, you are not supposed to use the sliders, but the radio menu option. Viper 13 02-13-2020 12:58 PM Ok, can you please clarify the steps needed to rearm CMS after they have been used? My teammates and I have tried both the radio option and slider to reload the CMS after a sortie. Swordfish 02-13-2020 09:27 PM I Have also tried the rearm in SP. I have not touched the rearm window - its shows 0 chaff and 0 flares. Rearm using the radio groundcrew menu. CM's do not fire Does the same thing in MP as well Tyrant07 02-14-2020 04:08 AM To add to this discussion I have seen the no rearm of CM during multiplayer. Steps taken to re-arm were as follows: 1)Open the AN/ALE-39 menu via the ground crew and select the desired CM load-out (10 chaff, 50 flares) 2)Open rearm/refuel menu and select fuel state and ordnance 3)When rearming is complete, check kneeboard for CM dials. (This would show the same info as before unless different amounts are chosen. ex. L10 C, L20 F, R10 C, R20 F) 4)RIO changes the programmer dials if needed to and/or holds reset on the AN/ALE programmer for 5 seconds and reset the counter dials We then takeoff and find out we have no countermeasures. Not sure if we did the steps wrong, or if this is indeed a bug. QuiGon 02-14-2020 11:02 AM Quote: Originally Posted by Tyrant07 (Post 4208074) To add to this discussion I have seen the no rearm of CM during multiplayer. Steps taken to re-arm were as follows: 1)Open the AN/ALE-39 menu via the ground crew and select the desired CM load-out (10 chaff, 50 flares) 2)Open rearm/refuel menu and select fuel state and ordnance 3)When rearming is complete, check kneeboard for CM dials. (This would show the same info as before unless different amounts are chosen. ex. L10 C, L20 F, R10 C, R20 F) 4)RIO changes the programmer dials if needed to and/or holds reset on the AN/ALE programmer for 5 seconds and reset the counter dials We then takeoff and find out we have no countermeasures. Not sure if we did the steps wrong, or if this is indeed a bug. Aren't you supposed to first rearm/refuel and then select the desired CM loadout when rearming/refueling has finished? Swordfish 02-15-2020 12:27 AM Quote: Originally Posted by QuiGon (Post 4208299) Aren't you supposed to first rearm/refuel and then select the desired CM loadout when rearming/refueling has finished? Does not work in both MP and SP Tyrant07 02-15-2020 02:42 AM Quote: Originally Posted by QuiGon (Post 4208299) Aren't you supposed to first rearm/refuel and then select the desired CM loadout when rearming/refueling has finished? I was under the impression the CM had to be done first so that something changes on the jet for it to take effect. Swordfish 02-15-2020 12:17 PM Quote: Originally Posted by Tyrant07 (Post 4209847) I was under the impression the CM had to be done first so that something changes on the jet for it to take effect. You do. But no methods work. CM do not rearm whatever method you try and use

You do. But no methods work. CM do not rearm whatever method you try and use

Does not work in both MP and SP

Cannot reapply ground airsupply after a flight (MP) When landing to rearm after a sortie, I shut down engines, rearm (due to current situation of having to shutdown to rearm- poster elsewhere). Ask ground crew to turn on ground power and airsupply. Ground power comes on. airsupply does not work so cannot restart my engines. Have to reslot to rearm. edit: just tested in SP - same problem. If I shut down engines after a flight, Ground airsupply does not work and cannot restart engines

Just to add for in MP. When landing to rearm after a sortie, I shut down engines, rearm. Ask ground crew to turn on ground power and airsupply. Ground power comes on. airsupply does not work so cannot restart my engines. Have to reslot to rearm.

I Have also tried the rearm in SP. I have not touched the rearm window - its shows 0 chaff and 0 flares. Rearm using the radio groundcrew menu. CM's do not fire Does the same thing in MP as well

also have just tried using the groundcrew menu - again no luck. I noted in the manual if you have a RiO you have to press the reset switch for 5 seconds. Perhaps jester is not doing this? I also tried changing various jest options in the CMS menu- again no luck.

Ive tried using the groundcrew menu after rearming - no joy Tried rearming, using groundcrew, then rearming again- No countermeasures loaded again. So basically atm im having to reslot in MP just to load CM's.

I should still leave the rearm menu flares and chaff alone correct? If they are empty or reduced i mean

Hi, Having lots of problems rearming the countermeasures in MP- used all chaff and flares. I use the ground crew menu option through the radiom order my loadout then go into the rearm menu (not touching the flare & chaff counters as instructed) and get fuel and loadout. no CM ever gets loaded, no chaff no flare. In kneeboard the CM's are listed as being there. Ive tried setting the Rearm menu chaff and flare to 60Flare and 140chaff (as it is at mission start), again no joy. Can anyone help with this?

Trying to set this up in MP so we know were our wingman is, any idea on to get it to work on the tomcat?

RWR is not giving nails or spikes from Ground based SAMS, Ship bases SAMS. Tested in MP with no SPJ and with SPJ. SAMS will track and fire, giving no RWR warning, missile warning etc.

Negative in my case.

before patch in MP RWR was detecting SAM nails, spikes and launch, post update SAMs do not appear on RWR at all. This is in MP.

FA18, F16 are showing up as FA-- on RWR. No numbers in the circle or box, just FA. This is with SPJ equipped.

I can select between programs 01-05. CH, FL, CH+FL are not selectable using the OSB. It does not cycle.

I power up the SPJ on the AAP- Runs bit. Then displays standby. Cannot get the SPJ out of standby after any amount of time, this is in MP.

MP RWR not working yet :(

THERE IS NO PATCH