-
Posts
108 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Oh-Zee
-
It's been six years, let's see if it still works and if your monitoring this for a response. Just started learning the F-86 and want to use my Voice Attack.
-
I cannot get this to work for clients on my server. Clients have installed as per instructions with negative results. It gives clients a message that the module is needed. Any suggestions ?
-
[CHECKING] Propeller is unrealistic and bent prop discussion
Oh-Zee replied to SmirkingGerbil's topic in Bugs and Problems
-
So it seems that after the last couple of updates, screenshots has stopped working. thought it might be a the server we fly on, so I tried it in single player, in multiple aircraft and still nothing. Went through key bindings and it's present and high lights when pressed, but nothing happens. I also search though lua files with no luck there either. Any suggestions ? Thanks guys.
-
Very nice skin. I have a working project on the Normandy map just using the Huey, P-51 (Skyraider) and F-5 so far. I don't believe the F-86 will work on the Normandy map because of runway length. I will refresh myself in the F-86 and see if it's possible. The F-5 just squeezes in and out of the fields. I am also going to put the A-4 on a carrier and see how that works. As of right now things are really working for the Huey. I have been using a script for autonomous ground forces that has made things very enjoyable and on going. I have four fire bases set up that are being attacked and the Huey's can ground attack, ambulance or resupply. Only using the P-51 and F-5 for heavy armor.
-
I ran across the P-51 mod and it does not work anymore. If you could get rockets and 20mm cannon on the P-51, that would be great. The P-47 would be a better choice, but it's not here yet. This last update has broken more mods, so I think it's just going to be easier to work with what there is and just re skin to make look a likes. I'm still working on a base map for the server and it's coming along. Just not enough usable assets in the mission editor to make things look half way decent. It's even hard to make fire bases because of the lack of scenery and that's for any map or era. I have to see if the skins that I do have, still work. I have SANDY skins for the P-51 and NAVY skins for the Su-25 that were working. I am also trying to incorporate autonomous ground troops as well. It has been a struggle to get the code to work properly.:thumbup:
-
It recognizes the command but rejects it. That is all commands. The command is spelled out as it should be,but rejected.Vanilla VA works with 99% accuracy, the plug in hears and recognizes the commands but rejects or needs more input.
-
Looks great, can't wait to see the finished product. I have found a weapons mod for the F-86, but I haven't dug deep enough to see if it still works. I'm digging through the forums once again to bookmark things I've found and then I will report on working or not right here. Thanks for the interest !
-
This is a call out to community skinners, mission makers and modders for your help to create a Vietnam atmosphere with the tools at hand. It doesn't look like we will get this part of the world in a map anytime soon, so to curve the appetite of all Vietnam war addicts, I call on the community to help me. I haven't run across any discussions in the forums towards this subject, so I figured I would see what ideas are out there. I have a dedicated server that I would like to commit to this era of aviation and all things Vietnam. It seems to be a time period of aviation which seems to me, to be ignored in the selection of aircraft for DCS. I feel that this is one of the most historic periods of aviation to date and I would like to honor it ! I was running this scenero on the Caucasus map, but recently found that the Normandy map may be more suited for the task. I have been playing with a list of aircraft to use as close to period correct and stand in aircraft as we have. This is my list of aircraft I think could be used to make this dream come true. Helicopters UH-1H SA342 as Huey Cobra Mi-8MTV2 Bell OH-58 Kiowa ( Coming Soon ) Aircraft Su-25 or Su-25t as the A-7D Corsair C-101 Aviojet as A-37 Dragonfly MiG-15bis MiG-21bis F-5E Tiger II F-86F Sabre as F-100 Super Sabre MiG-19P P-51D as A-1 Skyraider A-4 Skyhawk Also using Combined Arms and the WWII Assets Pack AI would include the F-4 Phantom, CH-53, B-52, C-130, KC-135, CH-47, AH-1W, OH-58D, Ka-27 as HH-43 Huskie, E-2 Possible Mods I've heard of would be a flyable F-4 Phantom, F-104 Star fighter While I am still playing with the abilities of the updated Normandy map to accommodate this era of aviation, I thought I would throw this out to community for some input, suggestions, thumbs up or down and maybe some direction from someone who has had this thought also. Vietnam skins for the aircraft listed above would be a great start for the immersion. If you know of any or would like to create them, just respond below with what you know. Thanks, Oh-Zee
-
So I've reinstalled Voice Attack and the Viacom plug in to give it a try again. The first time earlier last year, I couldn't get the plug in to register any commands even though the vanilla Voice Attack worked just fine. Not having any time to program my own profile, I put it all away until now. I have the licensed versions and I have updated both Voice Attack and Viacom Pro for DCS to the currant versions. I'm running a windows 10 machine for the operating system. Install all went well, Voice attack worked flawless right out of the gate. I did some voice training and now the recognition is at about 98%. I made a simple profile for the F keys while flying the AV-8B and once again, Voice attack worked flawlessly with that 98% recognition and accepted command. Now I take my time and install the Viacom plug-in letter by letter to make sure I've installed correctly (Running VA as administrator). I follow the manual for the settings that need to be checked or unchecked. To my amazement it goes without a hitch. I just make things simple by not programming anything for PTT and just use the keyboard as it's already set up. The keyboard works just fine for the PTT and I get DCS fired up, hop in the Harrier and I get dreaded red box next to the message, command recognized but rejected 23/56 or other percentages. So I do some more voice training, actually a lot of voice training and I still have the same results. Yet I can load my simple profile in the Vanilla Voice Attack and get close to 100% recognition and commands. I've followed things to the letter and watched many (old) YouTube videos with no real direction to go. I just want this to work, because it looks very overwhelming just to learn the commands to run it and I paid for it.
-
Got it thanks !
-
OK, so I fixed it. I don't know why, but because I have used an X56 and Warthog to fly with, once I erased these files it works. So there is some kind of conflict between the three sticks. All is well now, thanks for the help.
-
-
Logitech Extreme 3D PRO
-
Why am I missing the action ( Fire Guns or Rockets ) from the list of Control Options ? I can not fire any weapons in the Gazelle because this is missing from the list.
-
Thanks you very much, that explains it !
-
I have four AI that I would like to form up and get to the target at the same time and then return to base, but when they reach the last way point to follow, three of them go back to the base at which they took off from and don't perform the attack. So this is how I have things set up now. Four individual AI P-51's (Because a group attacks the same target) have ten way points, at way point three I would like three AI to follow a single AI to way point five and commence their attack and return to base. When they reach way point 5 the three followers peel off and return to base without dropping ordnance. Is there a certain way to set up these way points to get this done ? I've tried everything I can think of. Formation doesn't work either. Any help would be appreciated, thanks.
-
I'm going to try a different aircraft and see what the results will be.
-
So I set it up so the target radar is at 0 ft elevation and a trigger zone representing the EWR's detection range. While it worked, the altitude in the condition doesn't work at 500 ft. It only detected me once I broke 1800 ft. I tried both AGL and just altitude, same result.
-
Pretty sure I tried that and it worked as long as there were no other aircraft. I tried this on the NTTR map, but the mission in on the Persian Gulf map. I'm going to set everything up on that map for the experiment. Will let you know what the results are.
-
Is there a way to set it up in the mission editor to allow altitude to be a factor in a trigger zone. I would like to limit the trigger zone to only trigger if aircraft are above 500ft as an example. I'm working on a mission I would like to employ this in. I've tried flags on & off and changing value of the flag if above a certain altitude, but can't get anything to work. Once I add items to the conditions it simply doesn't work. This is what I want to do, place red aircraft ready to start if blue enters trigger zone if it's above 500ft, so you can slip in and kill a radar unit and shut down all other red aircraft on the map. I want to swoop in under 500ft and kill the radar so it can't warn others of the intrusion. Thanks for the help if any......
-
Push to Talk not working I have reinstalled SRS after some conflicts with Voice attack. Now after the install I can't get my push to talk to work and voice attack doesn't seem to respond either. Is there a certain order to install these two ? Is it possible the script files are the problem ? When I installed voice attack with the Viacom plug in, it wasn't working. Their solution was to delete the export file and that worked until I installed SRS. I have posted on the SRS discord and got no help. Here are my settings, any help would be great.
-
Thanks will give it a try.
-
So I've given it a try at exporting the MFD's of the Harrier to a second monitor. I been some what successful getting the MFD's to show up on the second monitor, but I think I have screwed something up in the process. My HUD only displays what you see in picture below and moving map does not work anymore. Below also is the lua file I wrote for it. I'm starting to think it's not the lus file and rather something in the config file itself. I was following someones instructions on how to fix my monitor setup to fix the Gui OK button from not being seen. I don't know if I fix them right or not. Is there files in this location that has to do with HUDs or maps? I've been struggling for two days to get either Helios or Ikarus to work and now I'm screwed. Anybody have an idea. Thanks for the help before hand. I just don't want to have to do a reinstall again. I've tried a repair and it says everything is good to go.
-
I will report it on the SRS Discord. I wasn't sure it was my SRS after installing the DCS Server Software at the same time. Just baffled me, it worked fine with DCS client software running as server and SRS vs. 1.5.9. Will look into some more, thanks guys, your always a good bunch to chat with.