Jump to content


ED Beta Testers
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Stuka

  1. I looked at your track until the point where you restart alignment. Until that part all was good. CDU was at, indicating alignment is complete. You just should continue with the checklist at that point, and everything will be ok. After EGI INS alignment is complete: 19. CDU - ALIGN Page - Depress NAV LSK. 20. Nav Mode Select Panel (NMSP) - EGI and STR PT, ANCHR, or TACAN, as desired. 21. AHCP IFFCC switch - TEST. 22. AHCP JTRS switch - ON - As required. 23. AHCP CICU switch - ON. 24. MFCD (L/R) - As required. 25. MFCD (Load Page displayed) - Load data (as required). .....
  2. The default position of the knob was changed per pilot feedback.
  3. Can you post a track? Just tested in stable. All red when I load weapons.
  4. At this moment, the gun reticule gives indeed "CCIP invalid" if it is not pointed at the ground. You can safely ignore that. A workaround is to change elevation data from DTS to HOT elevation: - use the DATA rocker on the UFC to switch from DTS to manually entered elevation. - The elevation will start to flash. -Either use the DATA rocker to select the correct elevation of the target (HOT), or enter it using the number buttons. -Press ENT to confirm. To go back from HOT to DTS: DATA rocker to enter the entry option and use the SEL rocker to set it back to DTS. ENT to confirm.
  5. The "CCIP GUN CROSS OCCULT" setting has nothing to do with the TGP Diamond. The TGP diamond will always disappear under the CCIP recticle. From the manual: CCIP GUN CROSS OCCULT. This allows the option to occult the TVV behind the CCIP gun cross in CCIP mode by selecting YES. So with the setting set to Y, you will notice that the TV will disappear if the gun cross is in the same position on the HUD. With the setting set to N, the TV and the gun cross will be displayed overlapping each other on the HUD (making it difficult to aim).
  6. yup, the VHF radios presets got fixed a few months ago. as for the original question: with the mission prepare function, you can set the presets in the Hog. As of recent, that is unique for each jet, so you would have to do it for each of them. A pretty easy alternative is to edit the preset files straight in the miz file. You can also copy them from one jet to another, or other missions.
  7. I watched the first track until the point where the CDU was powered down for the 2nd time. The main issue is that you are not following correct startup procedures, and making plenty of errors. I never saw a "load all" on DTC, there was no switch to EGI,... and many more errors. I advise you to study the manual for correct startup procedures of the jet. Also, the 476vFG has an excellent startup procedure for the Hog: 476th vFG A-10 II Flight Crew Checklist 01OCT20 - Downloads - 476th Virtual Fighter Group (476vfightergroup.com)
  8. Tested: the lights works as intended at first start in the mission. However, there is a bug: once the battery has been on, the flashlight always needs battery. So mission start - turn flashlight on:ok enable battery: flashlight ok disable battery: flashlight goes off and can not be switched on again battery back on: flashlight ok Reported
  9. Reported that the clock should be controlled by the flight instruments dial. I don't see any documentation that we can control the intensity of the UHF repeater and UHF radio display.
  10. yeah, it used to work back in time. It's been reported though.
  11. reported earlier. If the mission starts with LAU-88 and 3 & 9, and you rearm to a payload with TERs, the LAU-88 stays in DSMS.
  • Create New...