jed40

RAlt information is not readable when HUD is displayed on MFD

That's right : EL GORA The wrong indication is also on the map (ME and F10)

On Al Gora Rafah airfield, the indication of runway 08 is wrong. 26 is on both side of the runway. Thx

Hi all, Thanks a lot for all your answer. I will switch it off after using from now and and it should be ok. Thanks and fly safe

Hello guys, I have a problem with the laser rangefinder after a variable time. When the issue happens, it does not give the distance to the target. If I fire a Vikhr, he does not find the target, and if I try with the cannon, the direction is good but not the distance. I have tried a lot of action (reset laser, master arm off/on, changing laser mode, landing + restart helos...)to recover the rangefinder function but without success. I can recover it if I RTB and Rearm. After it works again. This never happens to me with BS2. Have you already have this problem ?? Thanks

Thank you for your reply. The Easy communication was enable, but even disable it didn't work better... In fact it was a keybind problem. "RAlt + \" is the good combination and not only "\" that is the communication menu on the ground... After modifying this it's good know. ps : it was not working on SP also, not only MP... Thanks

Hi Only in multiplayer mode, the communication menu does not appear as soon as the BS3 is flying in the air. When the wheels are on the ground the Com menu is displayed when I press the com button. If you are flying offline the communication menu is working fine... Have you notice this issue ? Thanks

Hi Xoomigo, Thank you for this. Finally I found the issue. It came from my DCS-BIOS folder. There were something wrong. I rename my folder, and I did a new install with DCS-coins setup and everything goes well. Thanks again for your time All my best

Thank you for your reply. With Win11 you can't select compatibility win10 because I think it's same process. Win11 is mainly a re-looking of Win10. I tried with windows 8 compatibility but unfortunately it's same issue. The message appear when I select modules in the list. If I select 1 I get 1 error message, if I select 2 modules, I get 2 error messages and so on... It seems that even if I select. For the following example, I selected F-16. I got the error message after pressing "Next" and then I can see this log on the main install windows. If it can help you...

Hi all I try to install DCS-COINS and during the setup process I have an issue when it ask me to select modules. After selection of one or multiple modules, I have this message on screen and no module can be installed. The message say in english something like "Impossible to call a method in a null string" Have you any idea ? Thanks I run it on win11

Thank you for all the answers. I will try this during my next flight !!!

With external tank, hot refuel on ground does not fill the external tank even if I select 100%. Only internal tank are filled at 100%. With same configuration it's ok with AAR. All tank are filled. Have you already notice this problem ? Thanks Track : https://mega.nz/file/l74kwJyD#mFrOGuH8ME0ABFpWqoscqXcwZV3KVBLT5nwOzlyXZ9c

@Nealius I just tried your recommendation, and it seems to solve my problem. I put +3 deadzone for X and Y and also put +5 for rudder in case... and everything works like a charm !!! Many thank for your help; Have good flight

Hi @BIGNEWY Thank you for your quick feedback. I tried again, and I got different result depending on the Map. On Nevada and Mariana Islands, to activate BALT mode, the plane MUST BE perfectly HORIZONTAL in both axis. If not it cannot activate. And I noticed that it's very sensible at at the rolling tendency. If it's not perfectly horizontally trimmed, the plan start rolling left or right even with A/P on BALT mode. I must engage ATTH mode to keep horizontal attitude. On all the other map A/P is less sensible at the attitude of plane during activation, and it can keep a certain stability even with a rough trim setting... So please if you can test on those map (Mariana and Nevada) thanks again.

Hi Guys, It seems there is an issue with A/P on F/A-18 with BALT mode. Frequently the BALT mode is impossible to engage. When it's the case, we can see on Left MFD "A/P" is appearing, but the plane does not keep altitude. If I cancel A/P with joystick button, A/P disappear from Left MFD. Sometimes, after few attempts, it works, but I noticed that if disengage itself without any axis entry, and the altitude changed slowly... I made a quick flight with the Marianna Island Instant action "Free Flight". The track of this flight is attached. Have you already see that problem ? I didn't see any report concerning this issue. Thank you for your support. FA18-AP-BALT-issue.trk