predator036

Thank you very much for answering my friend. I do not want to upload from version 1.56, flight in virtual reality. I have tried on another disk different to install version 2.5 and I have taken a great disappointment in virtual reality. The image quality is much worse than in 1.56 on the caucasus map. I have tried to touch everything, the colors, the brightness, the image quality in general is absolutely unreal. The performance is much worse, I have a very powerful PC and can not with version 2.5, i have a juddering in vr (I7 6700k, 32 ddr4 2600, m2 256ssd, titan xp). The summary would be, in the version 1.56 of the caucasus in vr, much better quality of image, everything more real and the cleanest image. Also a much better performance in vr, no juddering in anything moment fly over the caucasus map. Said all this, please how can I solve so that my huey h1 with the motors turned off does not move to the rhythm of the waves on top of an aircraft carrier at zero speed of navigation ???. Thank for help me dear friends. Greetings.

Hello friends, I have version 1.56 of dcs, from the editor of missions, I put a helicopter Huey H1 with the engine stopped, on top of the aircraft carriers that I downloaded from the mods section (charles degaulle, uss reagan, etc). The problem is that I launch the mission, my huey is on top of the aircraft carrier but it is not still, it moves alone, it slips, it slides through the deck, it's like it's on top of an ice rink. I tried to put the aircraft carrier at zero speeds, but even if the ship does not advance, the huey keeps moving alone. That could be happening ??? Excuse for my english and thank you very much for help me. Greetings.

Yes yes friend, of course, the first step. This is not the problem. Greetings.

Sorry friend, welcome to the club of people who with version 2.5 have no image in virtual reality hnd (htc vive in my case), only image in the monitor pc. I have open ticket in ed support and they tell me to look for my life, what lack of professionalism! Check these post that I leave here, the companions have kindly offered help, God bless yours. It took 72 hours since I installed the 2.5 trying to do everything and nothing works. Tonight when I return to my home, I will try the indications of the last hours of our dear forum users. Good luck and if you get it, please write me telling me the solution. https://forums.eagle.ru/showthread.php?t=201094 https://forums.eagle.ru/showthread.php?t=200926 Greetings

Thank you very much my friend, Your indications not function for my problem. Thank you so much for your interesting. Read this link, I'm desperate !!!!!! https://forums.eagle.ru/showthread.php?t=201094 Greetings.

Hello friends, I have a problem since yesterday that I could download after 6 hours version 2.5. when I execute it, it never throws the image to my hmd htc vive, only the image appears on the monitor. I have a reviewer in the configuration menu and the option to enable virtual reality is activated. I tried to take a shortcut to the desktop and add the command "- force_enable_vr", but this did not work either. I am very unhappy with the response of the eagle dynamics technical service, I have opened a ticket and they tell me to refer me to the forum to see if I can find something out. Small waste of technical service, incredible that give such an unprofessional response. I do not know what may be happening, clearly the problem is in the new version 2.5, I have on the same windows and same hard drive two versions of the dcs, one is version 2.2 and the other the new 2.5. when I launched version 2.2 the viewer htc vive is turned on as soon as you enter the dcs and it works perfectly in virtual reality. However, when I launch the new blue icon of version 2.5, the dcs only starts on the monitor, the hmd htc vive does not receive an image. there are more users who are complaining about this problem .... https://forums.eagle.ru/showthread.php?t=171923 Please be someone so kind to shed some light on this problem, I spent 48 hours trying to launch the 2.5 in the htc vive and there is no way to see it. on the same computer, I launched version 2.2 and it is immediately visible in the viewer. please any help I can do ??? thank you very much my friends, you are my only hope, since the technical service of eagle dynamics does not know how to give me a truly professional help. Greetings my friends.

Please friends some little help will be very grateful. I run steamvr from outside the steam platform. I use the vrmonitor.exe command and everything is perfect, the hmd htc vive and the tracking stations are detected, the synchronization icon comes out ok in green, all right here. Then I run the dcs 2.5 and it is only seen on the monitor, it does not launch the video signal to the hmd htc vive. The option to activate virtual reality within dcs 2.5 is activated. What can happen ??? Thanks for helping a newbie. Greetings my friends.

Please I need help, version 2.5 does not release me the dcs in vr mode with my htc vive in steamvr. I have the NO steam version of dcs world. I have updated version 2.0 openalpha to version 2.5, up to here everything is fine, but when I run 2.5 it is only seen on the monitor. I tried running the steamvr program first from the executable vrmonitor.exe and in this way if I get an image in the hmd vive. But nevertheless, afterwards I release the 2.5 dcs and only it is seen in the monitor, the hmd htc vive does not receive image from the dcs 2.5, only see the steamvr room. In the options of the dcs I have selected the option activate vr hmd. I tried to take a shortcut from the exe file of the dcs and add the command "--force_enable_VR", but this has not worked either. Please any idea what may be going on ???? Excuse for my english. Greetings my friends.

Friends, thank you very much to all of you for your interest and for offering me your help. Thanks from my heart. One question, the installation that I have on my computer is totally clean, from scratch. install dcs on the new hard disk and the installer installed directly the 158. I mean, that in this computer I did not update from an older version to the new nas, the 158, was a direct installation to the 158. even so, can I revert to version 157 through the command line method ???? how do you do it, downloading version 157 through the internet and replacing version 158 ????? I ask this question, because when using the word "revert", I think that this is only valid when it has been updated in the pc previously from version 157 to 158. this is my wrong idea ???? can you revert from 158 to 157, even if version 157 has never been installed on my computer ????? Greetings.

Friend here are my letter, please respect my frustration, thank you..... TITLE: Please help a beginner. I feel like crying, I'm very sad and frustrated. Hello friends, Please I need help inmediately. I'm a beginner, I've been riding the huey h1 in version 1.57 for a short time. Everything was fine, I was happy, I enjoyed flying a lot and it seemed like an incredible experience. I'm doing a course, I'm starting to take off and stationary flights in current classes. Everything was fine and I was happy until a few days ago I was updated to version 1.58, since then everything is hell, I constantly break the huey, not hard in the air or five minutes. I can not do stationary flights or advance in the classes of my course. This is due to the new option that they have activated in update 1.58 called "EGT LIMIT ENGINE". I am very sad and I feel very bad, I feel like crying, everything that I have advanced as a pilot, now does not help me at all. I have an old computer in the closet that has version 1.56 installed, which files I have to copy and do not write in version 1.58 so that I can continue to advance in my course of helicopters and that the huey behavior be the same as before. At the moment I do not want the "EGT LIMIT ENGINE" in huey, I want to learn more knowledge, advance as a pilot and when I dominate the flight, activate later this option of realism, in this moment of my learning it does not let me advance in my classes. This option at this time of my learning, only brings me sadness and frustration, I am very close to abandon the dcs and not use it again. I'm very sad about it. Please what files do I have to modify or overwrite from version 1.56 on 1.58 ???? Thanks for helping this beginner. Greetings.

Thank you for your quick response my friend. I am a new pilot that I am starting, I started to feel comfortable flying with version 1.57 and now this is a very important problem for beginners. It makes learning much more complicated, how can I solucinate it without activating the arcade mode? I want to pilot in simulation mode but with the operation of version 1.57. I have a hard drive in an old computer that still has version 1.57 without updating, what files can I copy from version 1.57 and overwrite in version 1.58 to eliminate this huey behavior called "EGT LIMIT" ???? Thank you very much for help the beginners. Greetings.

Please I need help my friends.... Since I have updated to the 1.58 version of the Caucasus, when I fly with the huey very often it has an engine failure and I fall to the ground like a stone....:mad::mad::mad: I usually carry the huey very loaded of weight, artillery, armament, fuel tank to the maximum. when I'm flying I notice that the huey is struggling to move forward, even if the torque rises, it seems to cost, after 5 or 10 minutes of flying, I lose total control over the huey, the RPM lights and the two center console lights come on of "ENGINE OIL PRESS" and "DC GENERATOR". When I put the external view, while my huey falls to the ground, a great flare of fire comes out of the turbine......:(:(:( I tried to remove the rear gunners and leave the fuel tank at 50%, with this I get that the huey have a much smaller weight, but I still do the same. At about 10 minutes of being flying, making a straight and level flight, the damn engine failure occurs and I fall to the ground.......:cry::cry::cry: I have looked at the random poblems of the configuration menu and I have them disabled. Please some idea what may be happening and how I can avoid it....:helpsmilie::helpsmilie::helpsmilie: The sensations of flying huey in version 1.57 were much better than in this version 1.58, now the huey looks like butter, I want a helicopter to be able to fly not to have it on display in a museum. Thanks for helping me my friends.......:thumbup::thumbup::thumbup: Greetings for all.

Guys, thank you very much for all your indications and help !!!. You are right, I have copy the mods in the folder that you have indicated to me of saved games, I have entered again in the dcs and indeed, there were all the boats and aircraft carriers !!!! .:lol::lol::lol: Thank you very much for your instructions, you are wonderful people. Greetings guys !!!!..........:thumbup::thumbup::thumbup:

Hi guys, I have version 1.58 of the NO STEAM caucasus and I have downloaded several mods of aircraft ships carriers and I follow the installation instructions, which say that you have to decompress the files in the following route .... dcs world \ mods \ tech here I have a single folder called WWII UNITS, the files of the ships I copy them out of the units folder, I leave it like this.... dcs world \ mods \ tech \ charlesdegaulle ship or KMS Bismarck (for example) When I enter dcs and I go to the missions editor, I choose blue coalition (for example USA, France, United Kingdon etc) and when I am going to add ships, I do not see the aircraft carrier charlesdegaulle and KMS Bismarck!!!!......:mad::mad::mad: in the section on adding static objects \ ships, it does not appear....:doh: in the section on adding ships, it does not appear too......:doh: However, if I open the encyclopedia, inside the mission editor, if I see the charlesdegaulle and KMS Bismarck with its technical characteristics, but I see a 2d photo of it, I do not see the 3d design in 360 degrees as it happens with boats that come standard.......:(:(:( What I can be doing wrong ??? is incompatible with version 1.58 ???? the route dcsworld \ mods \ tech is the correct installation route ??? Here I leave some of the aircraft carrier mods that I downloaded, none of them work for me, only I see the photo and the technical file in the encyclopedia but nothing else... https://www.digitalcombatsimulator.com/en/files/1824104/ https://www.digitalcombatsimulator.com/en/files/1524753/ https://www.digitalcombatsimulator.com/en/files/1540873/ https://www.digitalcombatsimulator.com/en/files/1546536/ https://www.digitalcombatsimulator.com/en/files/1228551/ Excuse me for my english, thank you very much for all for help me.......:helpsmilie::helpsmilie: Greetings guys.

Good new friends of mine, I've been testing the mission of our friend Ollie, I followed all the instructions step by step, modified options with the editor, changed the ROE, changed the behavior and the commands to my two wingman hueys, I assigned that attack a specific group of enemies by adding the name of the group, I have done all possible tests. After all this, I have to say that the ia in my wingmans is a real crap !!!!, I am very angry with eagle dynamics, they do not pay any attention and no support to the ia in singleplayer missions mode. It seems that for the lords of eagle dynamics only makes sense the online multiplayer mode. I've been through everything wingman do not obey me, wingman sometimes answer me, sometimes not answer me. If wingmans decide to attack the enemies, only one throws enemies one rocket every three days and never hits the target, after half an hour of mission they always leave of answering by radio. When I sometimes return to refuel to my allied base, sometimes the wingmans land with me and other times they arrive with me to the base, but they do not land, they are still making hover in the heights, in a word, a real disaster everything, the response of wingmans flying on patrol is totally confused, useless, just limited to make you company. The only function of the ia that really works a little better, are the two rear gunners of my huey, whenever they locate enemies they detect them and shoot them when I select free weapons. But scheduling external wingman to fly with me to help me is totally useless, not worth anything. Very bad eagle dynamics, I'm very angry. Thank you very much Ollie and thank you for all friends this fantastic forum. Greetings !!!.