Jump to content

Sartarius

Members
  • Posts

    15
  • Joined

  • Last visited

  1. Hi all, today Ive tested the Viggen in DCS 2.5. I think there is a bug with the BK90s. If i drop the BK90 as Server Host the bombs will just glide above my targets and dont leave there payload. Then 15 - 20 secs later they just dissappear. No explosion or something. If i play as a Client the bombs will just crash into the ground. Like it was in the older DCS versions. I hoped that the bug with the BK90s as a Client will be fixed someday. Best regards.
  2. Yes, its set to AKT POS and IN/OUT is set to OUT
  3. Ive tried to test the BK 90 Today. But i the Comuter wont calculate acourse for my Viggen. I can enter the LO/LA and after the takeoff the Course is set just in front of me. Coordinates are set corectly. I also cant Set the Waypoint from B2 to M2. Tact - 9 - B2 and its still B2... Bug appears since the last patch. Regards Edit. After some Testing i think i can enter the Waypoints but I cant select them by hitten the buttons B2 or B3 etc. It shows all time B1 in the Display.
  4. Ive read the Facebook News from Heatblur (https://de-de.facebook.com/heatblur/) Are the BK90 also Fixed in Multiplayer? (I can't test it right now...) Maybe someone else can test the BK90 in MP?
  5. Thx for your Reply Ragnar, I hope you can fix this issue soon.
  6. Hi, Yes i mean the big Explosion in Multiplayer... But why the Problem is only in Multiplayer and when I'm no host. If I Host the Game and in Singleplayer there is no Problem with the BK90. Maybe someone can explain why its working in Singleplayer and not in Multiplayer? Regards
  7. Hi all, someone knows when the Bug with the BK90 in a multiplayergame will be fixed... Regards
  8. Hi RagnarDa, if i set the Saturation of 1 on Y i cant use the rudder. If i twist my Stick nothing happens.
  9. Hi RagnarDa, thanks for your post. I have removed the Joystik Axes Controls and the problem is gone. Maybe the twist rudder Problem is back? Later I tested Rodds solution. And its working. Ive set a deadzone to 20 and the problem is gone. Anyway maybe RagnarDa can check the Control imputs for the Viggen and make the rudder a bit les sensitive? Strange is that I have the Problem only with the Viggen. My Su-25 and Mig-29 has no problems with the Rudder. Regards, Dominik
  10. Hi Rodd, i use an X-55 HOTAS. Its a Joystick twist. I have also the FC3 Planes and there is no error while flying them. I also tryed cleearing the Ceyboard controls for X and Z as you told. But its still the same error. Some other suggestions? Regards, Dominik
  11. Hi, the Support told me that i shall create a new topic for my error. So here is it. Ive bought the viggen Yesterday because i really like this plane. But i have a serious bug. After i start the Engine, my rudder/yaw is turing to right side maybe 15-20 degree. I cant fix this problem with any trim and its really hard to flight with that error. The Plane is very instable during flight. Every move on my Stik is really crazy. I've recordet a Video for you guys. Hope that helps solving my Problem: https://drive.google.com/file/d/0B-oUN0teSLSGal9IVmRTNDh6Skk/view Timeline: 0:00 - 0:40 my Control Settings 1:05 - 3:30 Startup Procedure 3:35 - 5:00 Taxi to Runway 5:15 - 5:30 Start on Runway as you see here it starts to drift to the right side. 6:15 - 6:25 You can see the Rudder and its a little to the Right side. I Try to trim but nothing happens... 6:30 Full Autopilot and Trim is fine 6:40 I go back to SPAK and rudder is again to the right side 6:50 Disabled SPAK and now the rudder is fine and i Can now trim the Plane. 7:15 SPAK on again. Trim is gone and rudder back to the right side. Ill hope someone can help me. Best Regards, Dominik
  12. I've recordet a Video for you guys. Hope that helps solving my Problem: https://drive.google.com/open?id=0B-oUN0teSLSGal9IVmRTNDh6Skk Timeline: 0:00 - 0:40 my Control Settings 1:05 - 3:30 Startup Procedure 3:35 - 5:00 Taxi to Runway 5:15 - 5:30 Start on Runway as you see here it starts to drift to the right side. 6:15 - 6:25 You can see the Rudder and its a little to the Right side. I Try to trim but nothing happens... 6:30 Full Autopilot and Trim is fine 6:40 I go back to SPAK and rudder is again to the right side 6:50 Disabled SPAK and now the rudder is fine and i Can now trim the Plane. 7:15 SPAK on again. Trim is gone and rudder back to the right side.
  13. Some other suggestions? If it helps, i can upload my DCS Config Profile for the Viggen or attach some Screens of my Config and the faulty rudder. I recently noticed something during my tests. If i disable SPAK the Plane is much easyser to fly. 2nd. If i start with SPAK enabled the Plane will turn to the right side after take off. Then i disabled the SPAK system and the Plane starts to turn to the left side. But i cant trim against that rudder. Maybe its an SPAK error? During startup i also checked the Trims on the Rudder and all looks fine.
  14. Hi, rudder is JOY_RZ Axis. Its the only thing where i find it in the settings.
  15. Hi all, ive bought the viggen Yesterday because i really like this plane. But i have a serious bug. After i start the Engine, my rudder/yaw is turing to right side maybe 15-20 degree. I cant fix this problem with any trim and its really hard to flight with that error. The Plane is very instable during flight. Every move on my Stik is really crazy. Is this the same bug mentioned at this tread or have i another bug/confg? Regards Dominik
×
×
  • Create New...