TomcatFly

Well, I have the feeling that indeed it crashed just after FLY button pressed, even if I could see the cockpit for a while. First time after install, I clearly remember that on the livery page there was not the 339 (strangely), but Mirage. Then I remember I closed DCS and on next opening, doing a mission with the 339 it got the liveries with no problems anymore. Anyway, as soon as hit the FLY button, it crashed again and same way. I then removed it since I really can't understand the reason. Anyway, if with the modified .lua (I added of course), it will not have IAS and other important indicator working, the 339 is nonsense for myself and in this case I will prefer to wait for the new official one arriving hopefully soon. My log is quite extensive sinc ein the past, if I remember weel, I set a pra somewhere to induce an extensive log that in case of probs could probably be more helpful. But I'm very keen on this, so I can't help it more about this. Thank you

Ok thank you so much! Let me know if you discover the reason or have any suggestion!

Yes, with the .lua , DCS starts normally (without the lua it does not even start, as indicated before in the thread). I can sea the 339 in the mission editor, chose the liveries and the rest. But, as soon as I go flying, 1s after the cockpit appears, DCS crashes. Can't understand what could it be, since I read that it should be fine with the .lua in the 339 weapons folder... About the log, I can normally open it with Notepad and a Pc...don't know with a mobile, maybe you need to rename it with .txt extention to open it with your mobile??

Laste updated OB here, installed back again the 339-A, I put the .lua in Weapons folder but as soon as on board, DCS crashes... Log file attached Any other? Thanks dcs.20220417-113149.log

Hi, just tried with another friend, with whom I fly often and with whom since almost 1 year we were not able to use VC anymore, and now VC it's working great wihtout anyone of us changing anything in our PC's configs and so on! So, on our side, I'd say that last OB 30/03 update solved the VC issue and this is great!

Hi, good news: just tried VC again, SRS installed and of course not connected to any server, and it just works great now!! After 1 year that I had it not working...nothing has changewd on my pc and network, only last DCS OB update it would seem... Tested in good old "normal" mode and aqlso in Integrated Modes that I really like and prefer for obvious reasons. Voice quality is fantastic too and it's super the possibility to play with mic input volume and master voluem directly by VC window. Tomorrow I'm gonna try it with another friend, in another place and of course with another network and let's see. Even with him, VC is not working anymore since quite long time, so we'll see... Which UDT/TCP port is now using VC? Just to check on my friend's router in case we'll have issues...is it 10308, same one used by MP servers or better to check is 5002, 5003 or other ports are open too? Thank you

Of course VC is enabled on the server i do to fly with a friend. Any need to double check specific ports to be open on the router ?

Exaclty the same here.

Exaclty the same for me, used without probs until months ago, then it stopped, router ports checked and fin, VC configured perfectly, integrate mic test working, tried with cockpit COM radio and old manner without clicking on the antenna symbol, even setting Mic always on : can't hear nor been heard. Instead, SRS working normally...

Last weekend I checked all was correctly set, VC interface working, PTT correclty mapped (even tried with Mic always on), VC interface integrated microphone test working...then entered a server with VC enable, nothing. Thing I remember pretty well is that - when I used to use VC all the times (and it was working, so until more than 1 year ago) releasing the PTT made some little "static" noise come up too, nothing heard anymore after VC stopped working. Question1: do you thing that having SRS installed - even if with auto start not ticked - could have any influence on VC? In any case, for me VC stopped working even before I installed and tried SRS (that works fine instead). Questions2: could you confirm me back which ports need to checked and be Udp/Tcp open? Anyway, I will certainly check it again today/tomorrow and report you back. Thanks

Hi, Leap Motion for me works very well (of course considering to have necessary space in front and pedestal areas) and I'm happy of theeven improved relaism it can give to such a great sim. Of course I'm aware there are still some issues here and there, I tried to make a simple list below: 1) Every time I open a DCS sim session, to make hands appearing I have to tick - in VR special menu - the Leap Motion Enable setting. As if, DCS would not save Leap Motion tick state of previous DCS session. 2) After enabling Leap Motion its sub-settings do not act at all like their state (these settings remained set as previous DCS sessions anyway). So, every time, to let them be coherent with their indicated function it's necessary to tick/untick all of them, then leaving them to the desire tick/untick state. From that point on, all is coherent, unless you touch the settings in the scroll down list at the bottom, if so it's again necessary to repeat the procedure. 3) As it's known, sometimes during flight for some time one hand disappear. It seems not disappearing anymore if I tick the "use hand for stick" and "use hand for throttle" settings, but this makes flying the aircraft (with normal phisical stick and throttle of course) sometimes little problematic if one or other hand links to stick or throttle of course, even if not such a drastic problem. Wishlist: 1) Possibility to make hands not disappearing (work reliably) even with the settings described above unticked, so without the stick and throttle control tick boxes set 2) Avoid the necessary Leap Motion Enable tick box setting every time DCS Open Beta is re-opened 3) I personally think that flying aircraft with Leap Motion hands linked on stick or thorttle is not practical nor precise enough, so I'd personally suggest to remove these 2 features or - in other words - remove the unwanted linking of the hands on stick and/or throttle levers (maybe this helping in avoiding hands sometimes disappearing too?) 4) It would be great to find a way to be able to play with rotary knobs/selectors in an easy and reliable way too. As they say, "just my 2 cents"

I used to use it, but it's almost an year there's no way for me to make it work again. No probs in making servers and so on, router ports checked, all nominal. But here VC not working yet...

Where the new 104 could be downloaded from?

Same here, but few months no VC working anymore. Tried slow repair and even contacting support, not clear at all why it's not working anymore. Tried installing SRS, no probs at all instead..

About the ports to forward in the router (in Tcp and Udp), are these to be linked to public IP (that is one I see when I create a server, e.g. 93.xx.yy.zz) or the IP of the PC on which I run SRS, I mean, internal IP assigned to my pc? Thank you!

Even after DCS 2.7 main update, still no way to let Voice Chat working. Of course option is ticked and even trying to change Voice Chat Input and Voice Output options, nothing changed. 10308 and 10309 ports already opened as UDP/TCP in my router. We can't ear each other. Quite strange since for many months last year we've used Voice chat every time with no probs. I've attached my log file, just in case anyone is able to help or suggest if and what we're doing wrong. Thank you all dcs.log

+1 I also noticed that since the update I can run with better performance than before using the shaders and I now can even push with MSAA to 4x and it's still better.

No Steam version. I'll try doing a Clean and Repair. Thanks

Even deactivating the shaders, at the start-up same message appears.... any hint about how to solve? Thanks

Hi, today I flew with a friend but voice chat still not working. Quite strange because we always used it with no probs (both of us with Rift S as always)...no changes.

Fantastic!!! Can't wait to fly the payware full version, on board with a friend!!!

I updated DCS yesterday but still didn't try! WOW, this is a great news then, excellent!

Excellent, good to know. But I would expect Realteck and other pc audio drivers should be someway updated by W10...maybe not... I'll check this, thanks for the hints!

Ok, interesting. I normally to send output out to my Rifs S plugged hedset, like always... I'll try too. Thank you!

...so, I'm not the only one. Any idea of how solve this? I tested everything, no good.