SC86

Thanks Flappie, I will continue to see if this works as I think my drives are fast enough, but will take you suggestion into consideration if it stops working.

I apologize if this is the wrong category to place this question. I just upgraded to windows 11 from 10 and deleted all the content on the hard drives as I didn't like how I set things up, especially with DCS OpenBeta. I had files on C and D and it didn't make a lot of sense. I found out that there is the ability to transfer files to another hard drive and using the command prompt in windows to make the PC think that it is still reading from the main hard drive. In command prompt the command appears somewhat like this: mklink /J "C:\DCS World OpenBeta\Mods\terrains\Caucasus" "F:\DCS Modules\Terrains\Caucasus DCS OpenBeta was loaded and stays on my main hard drive, then I put Caucasus and the F16 and F18 onto an external drive just to test it. I applied the mklink to each of these successfully. I was able to get into multiplayer, the plane loaded completely, but the map didn't seem to have any ground. The water base was everywhere and other players seemed to load on a flat solid something, but every attempt to spawn would ther plane would just fall then crash way below where the surface would be. I exited and ran the quicker 'Repair' feature, and got rid of extra files. I don't know if the repair feature just re-installed Caucasus and the two planes back onto C drive. In the attachments I will put a screen snip of the files I can see in the computer files. I think the diagonal arrow on the side of the file means that it is still pulling from the external drive? The SU-25 and Tf51D mustang are not installed in the sim. Thanks to whoever can answer! null

Thank you draconus, I will look into this and see if it works. Thank you, SC

The F14 both A and B in Open beta will not move for me, it worked fine up until the latest update. The indicators both on the upper-right UFC are the right pointing arrow and the rectangle. Due to these indicators not moving, the Oversweep flag does not appear and I cannot put the wings into automatic mode, and reset the sweep.

Hello Flappie, I actually did not do this, but I found a solution at least in the F18 in cockpit. I did a full Repair DCS World Open Beta, checked scan All Files, and checked clear older files. This seemed to work for the in game in cockpit inaccuracy of the cursor. I have not tried the window function yet (Alt+Enter) as my computer froze last time (before the repair), but I do have the SRS popping up over the game in fullscreen. I will try to play with that function when the multiplayer server restarts. Thanks for all your help!

I found this file and the line to change, however, it already says: = false,

Not sure what I was using before the update, but i switched it to the native res. in game after seeing your answer, and it keeps freezing, but this may be due to SRS loading after i try to join a server. SRS starting is why i started to load the game in windowed format, but now i cannot stop the game from starting in full screen, and I have unchecked the full-screen option in game. Also the Atl.+Enter doesn't exit from full screen. So I am stuck.

I start the game in small window mode then I go to full screen after the plane/map/weather, and everything else is loaded. In the small window the mouse is accurate and it can perform all of the functions over the switches and buttons and use the mouse wheel functions. When I press Left Alt+Enter to change to full-screen mode the accuracy is gone. This is just as of yesterdays 2.7 update, though in the previous version I would have to click the left mouse button to get it to function properly in any new screen such as the Esc. menu or the briefing window. I have only attempted this in the F18 and in multiplayer. This happens in Beta, which i guess is the only version updated to 2.7 now. Thanks for any help, this makes the game unplayable

I start the game in small window mode then I go to full screen after the plane/map/weather, and everything else is loaded. In the small window the mouse is accurate and it can perform all of the functions over the switches and buttons and use the mouse wheel functions. When I press Left Alt+Enter the accuracy is gone. This is just as of yesterdays 2.7 update, though in the previous version I would have to click the left mouse button to get it to function properly in any new window in full screen. Thanks for any help, this makes the game unplayable

This is in the Beta version, happens both in single player an multiplayer (which is a lot worse if it hits a player). There is a track file below if anyone wants to take a look. Thanks for any help. F16 A-A button firing missles.trk

This is in the Beta version, happens both in single player an multiplayer (which is a lot worse if it hits a player). There is a track file below if anyone wants to take a look. Thanks for any help. F16 A-A button firing missles.trk

Sorry, here is the track, hope it works F16 A-A button firing missles.trk

Here it is, sorry haven't paid attention to this in a while, here is the site I uploaded it to. You can skip to time>2:51 The missles fire without pressing the weapon release buttons or the trigger, just having master Arm on, and clicking the A-A button on the UFC

Thanks you guys who answered so far

I think it is about high time that we had only one version of DCS WORLD, it shouldn't be a big problem to have only one. I almost never play DCS world as most of my favourite servers are on the Beta version and all the new planes come out on the beta version. Do you have both versions and use both, or am I crazy for clogging up my computer with two huge versions of the sim?

These were working fine before the update, now they won't uncage and allow the seeker to find the target. I looked in my controls list and nothing has changed, unless the sim changed. Is there a new procedure to using them?

I am having the same issue, didn't take too much playing to get it to show up maybe half a year and never an all day player

This issue also happens in the F16, and it makes the sim pretty annoying. So when I load bombs onto the F18, I can get near a target, have my employment selections complete either before takeoff or during the flight to the target. I can have Master arm off select the bomb I want to drop, turn the master arm on and the bomb will just release from the plane without pressing the pickle button. This can also happen if I have master mode switched on, select air to ground mode and select the bomb from the MFCD, not don't think it matters which MFCD either. I also have this issue with HARMs in SP mode, then they don't even go to the target, it happens with Laser Mavericks too. I have one pickle button and a trigger to fire and drop weapons on the Thrustmaster warthog HOTAS. This usually happens in the BETA version of DCS, but have seen it in the stable version. Thanks for any help.

I actually purchased new memory that is suitable for my PC had to get lower speed, but the computer functions better now as a whole as my DCS isn't crashing. thanks everyone!!

Well I changed my RAM to the appropriate type, it seems to be working better, DCS BETA is still getting stutters, blackouts (F14), it may be a Windows thing, but other people in multiplayer are having problems also since the last update or two. Hopefully this week they bring out an update that fixes this stuff to run smoother. It may also be a Windows issue as you've noted, and most of the operational stuff I leave alone so I don't think my particular issue is with that. Thanks for your help and I'll keep monitoring this page to see if anything else pops up. Hope all the issues work out on your end JosGem72

Honestly I don't know if I want to have two different versions of the A10C, then also the Flaming Cliffs A10A, its too much. I hope there will be a way to take one or the other, upgrade or not. They said in their little blurb that you can change the A10C II to fit any time the A10 was flown, or something like that.

I play Beta mostly, but I have been experiencing crashes and restarts also. I have seen other posts including my own that have crashing and restating issues. My latest one the error was IRLQ_NOT_LESS_OR_EQUAL, it seems to be some memory writing error, but I can't seem to fix it. also, none of the responses I have seen in other players posts create a solution for me. I have been seeing a lot of issues lately with missiles in many planes, and some planes are behaving weirdly like the Harrier. The throttle didn't seem to match or follow my throttle control, or maybe the engine was not responding properly.

I have been experiencing computer restarts and BSOD errors mentioning Memory_Management during multiplayer in the Beta Version of DCS. I have 64GBs of ram at 3200 each is the same stick. It has been fine for months, but since the lst update or two I keep experiencing restarts, sometimes after taking off and flying, but more and more after just selecting the plane to fly and entering the cockpit. I have tried looking at the event viewer and that hasn't helped, I've tried repairing DCS Beta, it always seems to want to clean up old files and I always allow it to, but the files should be cleared if I try to repair it again and it doesn't seem to actually clean them up. I have seen other posts about this sort of thing recently, but I haven't found any solutions that work. My computer isn't having any trouble otherwise. Specs: Acer Predator Orion 3000 Intel Core I7-8700 CPU @3.20 GHz 3.19 GHz RAM: 64 GBs 64 Bit Operating System, x64 Bit Based Processor Thanks if you can help! Windows 10

I tried that yesterday, I left the PC as it took a long time. It says that it is supposed to restart after completion, but when I came back the PC was shutdown, not by my or anybody else's doing. I I remember it saying that there were some errors or something within the first half of the scan, but wouldn't actually give me the info. Do you know how I can find it?

I am having the exact same problem in BETA version, I just had this happen to me again and was going to make a post about this. I have been having a lot of stuttering problems recently, since the last update or maybe 1 or 2 updates before that. The last bunch of updates, the updater has been finding all sorts of files and the program asks if I want to delete them, I usually say yes. I tried repairing the Beta version, and it found extra, old files, and asked to delete or keep them, I pressed delete. It told me that the repair was successful, but I had the same restarting error today as I said. If the PC does give me a blue screen BSOD error, the error is with the memory_management error. I hope they fix this because I have 64 GBs of RAM and its supposedly fast ram, so it shouldn't be happening.