itarrow

So I am just an old fart of 55 years old, with an Index and a PC that I will soon change as it has an old 2080TI (still working well with my Index tough). I am considering buying a Q3 both as an upgrade vs the Index as well as for the standalone option, and, for PCVR and Sims like DCS, I was thinking to use it wired so not to have quality problems. Reading this thread here however intimidates me: is it really so hard to get some quality out of a Q3 in DCS ? I am not talking about wireless remote streaming here... Simple, easy, wired connection from a Q3 to my PC to play DCS, BMS, Elite Dangerous, all seated Sims (so wired is not a problem). Is it really hard to get some quality from a Q3 wired, so to see an improvement vs my current Index ?

Hmmm can’t get a successful 1-2-0 mission flying just as pilot… will skip it….

IFF has been mentioned a lot, and it is really one of the main issues in using George as CPG. Another problem that could be important, depending on the mission, is that there is now way to tell George to target or fire to a building or a bridge or static targets.

Thanks for the insight, will try to do the same for Mission 2 and move in the Campaign.

I am stuck on mission 2 for another reason: I play just as the Pilot, I don’t want to jump back and forth between the 2 seats, and it is impossible to have George targeting or firing bridges. I am wondering if to simply skip this mission, but then if in next missions there will be other stationary targets like buildings, same will happen and therefore no sense in keep playing for me. Without spoilers, does anyone knows if later missions will have building or bridges as targets ?

Agreed that probably “George wheel” should be a bit expanded to allow for this. A good reference in DCS itself is Jester wheel in the Heatblur F14 module, which allows for complex operations with an AI RIO. I hope anyway that when the Apache will be released, players will be able to play any mission without the need to jump back and forth between Pilot and CPG.

As far as I have understood, today it’s impossible to fly just as a pilot and use George CPG to target/fire to stationary objects like bridges and buildings. For the sake of immersion and playability as a single operator (ie the pilot) of the Apache, in SP or in MP, I think it makes sense to have the possibility to play any kind of mission just in one of the 2 roles the Apache allows to. Having George targeting not just enemy units, but also bridges and buildings, would allow this to happen.

So I’ve got a bit more confident on my piloting skills to try some missions as well as campaigns. I fly SP, and just as the pilot: I am not interested (at least now) to learn the CPG stuff. I had a mission where I was tasked to destroy a bridge: couldn’t find a way to have it listed within George target list, which is always just about vehicles. After that, I have tried also with buildings etc in other missions, and I can’t find a way to have George target a stationary target like a house or a bridge. I understand I can do it by moving to the CPG station, but I don’t want to (if possible) as my interest is to play just as the pilot. Is there any way to have George lock stationary targets that I am missing ?

We Italians discovered America, so we own America, so you are actually correct.

Maybe in the future I will try also CPG, but for the moment I want to fly just as the pilot: I know how to have George searching where I am looking, but I am not sure I saw any command making George search on broad areas… am I missing something ? Ah OK so this is why I can’t see them… am I doing something wrong or is it a bug ? By the way, any broader, more generic tactical suggestion is welcome of course !

So, after finally getting some success in hovering etc, I decided to try a combat mission, and it was Hercules Down. I play in VR and just as the pilot. I realized I know 0 about helo tactics and best practices. I tried learning by attempts, but after some frustration I kindly ask you helo experts to provide some advice. 1) How do you find moving targets traveling in a forest… efficiently ? Maybe it’s because I am a not yet effective pilot and I focus too much on piloting, maybe VR doesn’t help, but how are you supposed to look for and find targets moving in a forest, without labels and with the limited assistance George provides now ? 2) How do you pilot while searching in a potentially hostile area ? Are you supposed to hover and jump from a place to another after having scanned ? Or are you supposed to move fast and hide if you detect something ? 3) How do you engage a fast moving ground target in a not so open area ? Again do you place yourself in a hover, qnd then engage when the target becomes visible for a few seconds, or are you actively moving and follow the target so to open opportunities ? Thanks in advance for you patience !

The Apache is my first DCS helo. I am slowly learning and getting used to it. Yesterday while free flying near Guam I was finally able to land on the carrier, and even being 53 I was happy as a 2 years old walking his first steps. Said that, there is one thing I am realizing while learning, and before going to wife to beg to allow me spend some money, I would like some more experts feedback. Seems to me that this module really test the quality of my controllers. I have a Warthog throttle/joystick and I think I am now able to fine tune cyclic and collective. I have also Thrustmaster T Flight pedals, and there I am really struggling. Despite greasing and oiling, after a few minutes of flying they always get some resistance when trying to do some micro movements, so I need to apply more force to get it unstuck and as soon as it get unstuck it moves too much and then I need to overcompensate. I find really hard to get the accuracy and “softness” needed to control the AH64 with this kind of behavior. This was never a problem with the jets I was used to fly in DCS, as with those I pretty much never had to so accurately dose my input. Here on the Apache I find it really frustrating. Is anyone else using TM T Flight pedals with the Apache ? Are you having similar issues ? If not, which magic did you applied to get rid of the random resistance introduced by the pedal plastic slewing on the iron guides ? And finally, any suggestion about some good rudders working well with the sensitivity needed on the Apache ?

Following with attention this topic, thanks all for the suggestions and advice. AH64 is my first helicopter, and well the transition is quite… complex. Spent 2 days just to understand how to take off and land, and now I am barely able to do it with some dignity. I don’t really know how I will ever be able to reach a stable hover and keep it: I am now able to fight against the Apache and win convincing him to land somewhere near where I want to land… but I can’t even imagine how I will be able to stay hidden behind a hill hovering there and popping up just as needed. Fun, but hard.

Thanks for the outstanding CTS profiler as well as for the prompt support !

Thanks !

I use DCS World Target Profile CTS configurator for my Warthog and at the moment, even reloading luas and rebuilding the profile doesn’t work… Any clue about what I should to to get it back working ?

I'm getting mad. Suddenly (didn't play for about 2 weeks, restarted today) most of the F14 commands in my Warthog throttle don't work. Wing sweep commands, all SAS switches and the refuel probe switch don't work. But the Kneel/Extend command work. And also the comm hat works, and also Jester UI switch. I tried reinstalling CTS from scratch, disconnecting reconnecting warthog, nothing. I have tried using same commands on other modules (with their own profiles) and everything works, so it shouldn't be an hardware fault. Any idea what should I try ? I'm using all latest profiles (257 if I remember correctly for WH, 252 for kb)... (Edit: tried using also some old Luas that were working, like 247… now they don’t… I am really clueless…) (2nd Edit: it seems Heatblur changed something in the bindings with latest patch… tough I tried reloading luas and it didn’t solved the issue… anybody knows how to get CTS F14 profile back working after last patch ? Here is the link to the thread mentioning the issue

Noticed the same recently: with autopilot on, trimming doesn’t work. I have gone back to the F14 few days ago after a long pause, so I thought it was like that forever and I forgot… Now I am no longer sure…

Also for the RIO ! Thanks ! I didn't do it for the RIO as I never use it, but after your suggestion I did it and now it works (no more red exclamation marks)

While talking about the Tomcat: I've got back using it after some time spent with the Harrier and I'm using CTS 2.574 (Warthog user with VR). Whatever KB/WH release I select among the ones available (252 or 246) for my kb/WH combination, I get a whole bunch of red question marks along most of the command listed as soon as I assign the profile to kb and wh. This doesn't happen with F16 or Harrier or Hornet, just with the F14. I tried using the profile anyway, but there's a bunch of command not working (ie trim or wing sweep or gear up/down or CM/DLC selection) while some others are working. Wonder if anybody can suggest something to try and have also the F14 profile working...

Same here: DCS single player with any naval op is unplayable now.

F16 profile on Warthog with VR: the Master Mode Command key on the joystick zoom view instead of enabling NWS. Am I doing something wrong or is this a bug ?

Second that, would love it.

Hey there, tried looking around here and in Reddit but couldn't find an answer. I want to change the AV8B livery so that anything I do (SP, MP) I start with the livery I want without having to select or go through the editor. Ah and I also want my wingmen to use it. I have read about the need to modify a "description.lua" file which however I can't find for the AV8B. Any way I can do it ? Thanks !

My personal opinion is that the Harrier has still some issues, but it is not that much worst than, say, the F18. What makes the experience horrible in SP is mixing Harrier peculiarities (VTOL, Tarawa) with long standing DCS problems (AI) which should be addressed by ED, who probably doesn’t care because Harrier it's not their product and anyway they have much more issues to address impacting more modules before focusing on a single Razbam aircraft. This alone makes the Harrier experience worst than the one with other modules, because the F18 AI is anyway able to take off and land on SuperCarrier. Anyway I was just trying to understand if anyone has some advice about how to have AI taking off/land on Tarawa using payloads similar to mine (player) in SP missions... so that maybe I can go back to DCE and Liberation and fly the module I prefer.