Hummersepp

I managed to made it running. I put it in a wrong folder. Now everything works fine Thank you

Sure - currently my wife is blocking the PC due to home office and I am working on the laptop downstairs - I will send you the files in the afternoon Stay safe!

Unfortunatly I can not make the campaign running. I watched your installation video carefully and followed all instructions. However, once I open a mission in the mission editior (after I update the scriptloader file) for testing reason, I jumped into the Harrier at FARP Madrid and a few seconds I get the message that it cannot load the script file "Initialize.lua"

Hi Folks - is there no solution out there? I have this issue in the F-14 and F-18 module. Thinking about to rollback to 2.5xxx or even to the stable version Thank you.

I have this error in the F14 and F18 so far

very annoying - had a free day and was happy to play some F18 and F14 campaigns...But still have this error

Same here but I also have it in a F-18C mission and not in the F-14 so far

Hi folks, hope you are all doing well. I have updated to OB 2.5.6 yesterday evening. I tried to continue the Cage Bear Campaign for the F-14 but when I start the campaign, I am direclt on the F-10 map and not in the cockpit. I played the Hot Start version. I have reseted the campaing but it still doesn't work. Do you have any idea/solutions? all other campaigns and also the Cage Bear F-14 Cold Start campaign works perfect so far Thank you in advance for a brief feedback. Sascha

Thank you Viper for your quick reply! Highly appreciate this. Have a nice day. Greetings from Germany Sascha

Hi Folks, I have a short question and hope that you can help me. How can I map the switches on the HOTAS Warthog Throttle in DCS correctly (i.e. not using Target)? So for example the EAC Switch or the RDR ALTM switch on the button left of the Throttle. Let me give you an example so you understand my issue: I am currently playing the F-18 Module. On the EAC Switch I have mapped the Toggle Master Arm on/off. So in the Target Software I have no issue mapping this key, i.e. switch up = Master Arm on and switch down = Master Arm off. But when I map this in DCS itself (i.e. not loading the TARGET Software) I can only map the switch up Button. If I would like to turn Master Arm off, I need to pull the switch down and up again. So it should basically work because when I play the A-10C module the EAC Switch and the RDR ALTM swich work without using TARGET (i.e. Up = on, down = off). Hope someone can help me. And yes - I am familiar with TARGET Software and I use it a lot. But when I would like to fly another plan and exit DCS, load a new profile and start DCS again is a waste of time :):):) Kind regards Sascha

2019-08-24 14:22:47.116 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 0.900000. Update lod buffers. 2019-08-24 14:22:47.117 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-08-24 14:22:47.117 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-08-24 14:23:18.893 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 1.000000. Update lod buffers. 2019-08-24 14:23:18.894 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-08-24 14:23:18.894 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-08-24 14:23:23.359 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 0.900000. Update lod buffers. 2019-08-24 14:23:23.360 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-08-24 14:23:23.360 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-08-24 14:23:31.946 INFO DX11BACKEND: Unloaded 170 mb of textures. 2019-08-24 14:24:01.139 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 1.000000. Update lod buffers. 2019-08-24 14:24:01.140 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-08-24 14:24:01.140 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-08-24 14:24:02.877 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 0.900000. Update lod buffers. 2019-08-24 14:24:02.878 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-08-24 14:24:02.878 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-08-24 14:24:03.657 INFO Lua: Lua CPU usage: metric: average mission execution: 0.8169 % 2019-08-24 14:24:10.079 INFO Dispatcher: Stop 2019-08-24 14:24:10.726 INFO Config: netview stopped 2019-08-24 14:24:10.770 INFO DCS: wcTanker::onEvent:5 2019-08-24 14:24:10.770 INFO EDCORE: (wcTanker::Channel)enterToState_:6 2019-08-24 14:24:10.770 WARNING LOG: 1 duplicate message(s) skipped. 2019-08-24 14:24:10.770 INFO EDCORE: (wcTanker)enterToState_:3 2019-08-24 14:24:10.770 INFO DCS: wcTanker::onEvent:5 2019-08-24 14:24:10.770 INFO EDCORE: (wcTanker::Channel)enterToState_:6 2019-08-24 14:24:10.770 INFO EDCORE: (wcTanker)enterToState_:3 2019-08-24 14:24:10.856 INFO TERRAIN: lSystem::CleanScenes() 2019-08-24 14:24:10.870 INFO VISUALIZER: StopSimulation 2019-08-24 14:24:10.875 INFO VISUALIZER: Stopped collection of statistic. 2019-08-24 14:24:10.906 INFO EDCORE: (dDispatcher)enterToState_:3 2019-08-24 14:24:10.978 INFO VISUALIZER: TerrainRenderer::release 2019-08-24 14:24:35.063 INFO DCS: Screen: Campaign

Thank you I use Script 11.0.7. attached are the log file

Thank you very much for your feedback. However, I have installed everyting in the correct folder and I have not modified any script files .... I still have the issue and do not know why?!?!

DCE Campaign and F18 Module - won‘t continue after exit the mission Hi Folks, Hope that I am i the right Forum and someone can help me. My issue relates to the F18 Module in connection with the DCE campaigns. I finished a campaign mission and press ESC and „Quit“. For the Harrier or Tomcat DCE Campaigns everything works as expected after that which means that the Standard DCS de-Briefing screen will be displayed where I can see my mission results. At the same time the DOS window open where I can accept the mission results (or not) and the text editor also with the mission results. Unfortunately this does not work in the F18 Hornet DCE Campaigns and I do not now why. When I finished a mission and press ESC and „Quit“ I see the black loading screen with the DCS Logo. In the background the DOS window and the Text file from the DCE Campaigns opens as well but that‘s it. I can accept the mission and DCE generates a new one. But I cannot press the „End Mission“ Button as i do not see it but only the Black Screen. The Game will not continue and I Need to restart DCS. I thought that maybe I accept the mission, generate a new one and restart DCS May help but unfortunately not. I still can only play the mission I flew last also DCE generate a new one. As said before this only applies to the DCE campaign and F18. All other DCS modules work perfectly with the DCE Campaigns. I also do not have this issue in Single missions or the static Campaigns for the F18, i.e. Everything works perfectly there. Thus and in my opinion this must relate to the DCE Campaign. I also re-installed the Campaigns but nothing helped. I Play the DCE campaigns in the latest version actualy published on the website. Hope someone has an idea as I Love the Dynamic Campaigns (and the Hornet) very much. Thank you all in advance and Kind regards. Hummersepp

Can I win a DCE Campaign? Hi All I love the concept of the dynamic campaigns. They are great and a lot of fun to play. However, I was wondering whether it is possible to win the campaign and if yes, what do I have to do? Destroy all red troops? Thank you in advance for your feedback. Kind regards Hummersepp Germany

An Eye for an Eye - Mission 1 cannot be completed Hi Folks, I have a stupid question: I played Mission 1 many time but unfortunately without success. I shot down the plane as required and before it enters foreign airspace. I got the message that I finished my job, land at Kobeleti but only get 5 Mission Points. I thought for a successfull mission i get 100 points? Hope somebody can help and I wish you all a good start in 2016! Hummersepp (Germany)

Hi Folks, still having the black building issue in the TGP after updating to 1.22xxx Does anyone has a solution for this (insteat of pressing ALT-TAB) Thx. Hummersepp

Hi Folks I can also confirm that the ALT TAB workaround Works but then another issue occurs with Black buildings in TGP See my Post under http://forums.eagle.ru/showthread.php?t=95640 Kind regards Hummersepp

Hi Folks, first of all many thanks for all of your replies. Very much appriciated. Will test this in the evening when I am back from the office. But anyhow, in this context I have a further question: You said not using ALT-TAB as this may cause the problem. However, I also have had the problem a while ago since updated to DCS World that when I start a mission, I see the opening screen in the cockpit, but I can neither hit the "Fly" Button nor any other button in the cockpit when slewing the mouse over it. In this context I have read here in this forum, to use ALT-TAB to get back to windows and then back to the game and this has solved this issue. Is there also another solution for this issue (because I should not use ALT-TAB in order to see the complete buildings in TGP). THX again to everyone! Greetings from Germany Hummersepp

Hi Folks I have updated to the latest DCS World and have the following issue (hope someone can help me): When I am slewing the targeting box at the TGP over the targeting area in a city, I noticed that some buildings (not all) are black, i.e. no texture showing in the TGP. This is only an issue in the TGP. Looking outside the cockpit into the "real" world the textures of the buildings are available. Does anyone of you notices this issue, too and have a solution? I play at the hightest solution (1920 x 1200) and have updated to the latest drivers from nvidia. Thank you all in advance. Hummersepp (Germany)

Hi HiJack, thanks for your feedback. Will try... best wishes hummersepp

Hi Folks, first of all, I wish you all a happy new year!!! I have a problem with FC 2 and hope, that you can help me. A few days ago I have re-started to play FC 2 again. Unfortunately, after the 6. or 7. mission in the A-10 campaign I get the following error message, when I wanted to enter a new mission: I have received this error message also a while ago after the 2nd mission in the A-10 campaign so I have re-installed FC 2 and the issue seems to be solved at that time. If I click the "Restart Campaign" button, everything works fine and I can restart the campaign and fly the missions but that doesn't make fun :( The campaigns for the other aircrafts seems to work fine, but I am currently no sure as I only play the A-10 campaign currently. I hope, that someone of you can help me. Thank you very much and greetings from Germany Hummersepp My PC System: Intel Core i7-2600 @ 3.4 GHz Win 7 (Home Premium) 64 Bit 16 GB Ram nVidia 560Ti 1,25 GB (Treiber Version: 285.62) My ModMan Config

Hi Folks, I am new in this forum but hope, that someone can help me. A few weeks ago I have bought a new graphic cart (ATI 5770, 1 GB Ram). Since that day, Lock on with FC 1 (Version 1.12b) won't start! When I start the game with the desktop icon, I can finally see the task top icon in the task bar and hear the radio calls. But even after many minutes, I still take a look at the desktop and the game won't start. First, I thought it has something to do with Win 7. But with my former card (nvidia 8800 GTX) I have had no problems with Win 7 and LockOn/FC 1! I have also re-installed the game, changed it to compatibility mode "XP", reinstalled the newest drivers for the graphic cart etc. but with no changes. I hope, that someone can help me! Thanks in advance. BTW...FC 2 works fine for me! Greetings from Germany Hummersepp My PC: Intel Quad Core, Windows 7 32 Bit, 4 GB RAM, ATI 5770 with 1 GB RAM,