WolfhoundCH
-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by WolfhoundCH
-
-
In several occurences when landing and taking off from the ground, especially near N34° 01.103' E036° 03.740', I encountered issues that the wheels glitch into the ground. In the trackfile attached, I landed and felt the right wheel just not stop on the ground and my helicopter rolling over.
In the other trackfile it happened on lift-off.
Now we use Mods to build the FOB here, but on the ground itself there's nothing, no AM2mat or anything, just plain wheel on ground.
Trackfiles here:
https://drive.google.com/file/d/1NRd1CWnasS78nAayVJ74p-g3c7bQFUre/view?usp=sharing
-
According to physics, .57in should be +500ft altitude. In the F-15E, it's 1:10 exactly
-
1
-
-
Yeah we did, SH works, but that's a workaround, not a solution.
-
Already reported
-
Already reported and found the issue
-
Found the crash/freeze issue, it's related to Singlethreading, was fixed with changing to Multithreading. But even with Multithreading, with 4 threads some jitter but OK.
-
Aircraft set to 'cold needs GC align'
Multicrew with WSO
Parking Brake + Chocks on
Northing + Easting entered
GC Align set
Starts "GC NO TAXI"
Countdown from 15.5 to 1.1
Then cycles back to GC NO TAXI and sticks there for at least a minute. No GC OK ever seen. -
In Multicrew, when the WSO creates an HRM map, no matter if the pilot has A/G RDR on an MFD or not, the pilot client hangs. No messages in crashlog.
Tried it multiple times, repeatable issue.
-
Bump, dear US people, not everyone is in the US or automatically interested in US Timezone. Point it out specifically please.
-
1
-
-
Bump, why does every US Squadron just assume that the whole world is in their timezone or timezones don't matter, even though a west coast member might have a hard time joining an east coast SQN so you prevent hassle by just announcing it directly?
-
1
-
-
Yes please, best even in the title
-
1
-
-
10 hours ago, sirrah said:
I tend to be so exited when seeing new "bling" in DCS, that I fail to see any downsides. Same here with the new SA map. Just so thrilled to see yet another new map. Imo we can't have enough of them
That said, the OP has some very valid points that I do agree with.
I don't believe the price is too high, but it is fair to say that Ugra delivered a more complete map on release, for the same amount of money. Razbam's price for the SA map just puts a little more pressure on them to get on par with Syria's release version soonish. It's very obvious that there's still a lot of work to be done, especially in terms of ground details and missing scenery (mostly small villages and industrial sites). In general, what struck me most:
From high altitude:
- Ground (satelliet) textures look extremely pretty and realistic
- Cities look quite poor, in terms of too obvious repeating scenery (like looking at tiles)
From low altitude:
- Ground textures look poor (as we all know is WIP), but also in many places it lacks proper terrain slopes (satellite texture showing a bank near a river, yet the terrain is flat)
- City scenery look quite good an diverse, both in colors and shapes
Not at my pc now, but I'll try and post some screenshots later, to show what I mean
Anyways, I'm glad I purchased, having fun with the new map and until proven differently, I'm having all the confidence that Razbam will further improve this map (within a reasonable timeframe).
Same amount? Syria was 34.99, this is 20$ more!
-
4
-
Bit frustrated to read that pilots not only got oxy on/off but now also toggle, while RIOs still can't bind that function at all!
-
On 5/12/2022 at 9:36 PM, Jagdgeschwader said:
Ich hatte das gleiche Problem vor einem Jahr, bin aber seitdem nicht mehr mit dem Mosquito geflogen. Ich erinnere mich an eine Nachricht von ED (ebenfalls vor etwa einem Jahr), in der sie sagten, dass dieses Problem bald gelöst sein sollte.
Interessant, ich flieg sie seit dem Launch im September und hatte es nie. Aber der linke Motor raucht zuverlässig bei jedem warm-up.
-
Der Motor sollte aber nicht verrecken, er raucht einfach, völlig ohne Grund, die Temperaturen sind meist OK. Also ich kann die Mossie fliegen ohne Probleme, nur der linke Motor raucht nach dem warm-up, aber das hört in der Luft dann wieder auf nach einer Weile.
-
I agree. I bought it because currently in Normandy, the textures are really bad, and Channel does look awesome, ngl.
But having to see how the already bigger Normandy map is getting updated and EVEN bigger, while in Channel we got those ugly blue-blackish borders all around and you can't fly around Biggin Hill without being punched into the face with that border.. is just sad.
-
On maximum continuous thrust (2650rpm, +7 boost), I use aileron trim to the first notch, and about 1/3 notch rudder trim to keep it straight and level. In higher power settings (I only fly low level, almost never climb above 5000ft, so my climbs are short), I just correct with stick and pedals.
-
1
-
-
I flew the F/A-18 and the F-16 in DCS, and the HOTAS logics as well as MFD logics of the F-16 are so much easier to learn than the F/A-18, and thus also easier to keep if you're not flying very often. I can do breaks of 2-3months in the F-16, it takes me two evenings to be right back in there with the muscle memory on all systems as well as flying the aircraft on refuelling, overhead break recoveries etc.
-
2
-
-
Ich wünsche Euch viel Erfolg dabei, da habt ihr noch sehr viel Arbeit vor euch.
Meine persönliche Empfehlung: Überlegt euch gleich ganz am Anfang, wo ihr euch im Realismus-Spektrum definieren wollt. Wollt ihr rein casual fliegen ohne realistischen Funk? Wollt ihr soviele realistische Verfahren wie möglich umsetzen? Wenn ja nach welchem Vorbild?
Falls etwas dazwischen: Wie soll das genau aussehen, wo setzt ihr eure Grenzen nach oben und unten?Das ist meiner Erfahrung nach sehr wichtig um sich gegenüber anderen Gruppen abzugrenzen und interessierten Piloten klar darzulegen, wo man hin möchte und was man vermeiden will.
-
Ok I'm positive that the nVidia driver update solved it, even with mods now working. Thanks for your help!
-
Hey and thx for the quick response.
I don't run DCS as admin, and renaming the savedgames folder lead to DCS not running (only one instance allowed - but DCS is not currently running)
Edit: Updated nVidia drivers and testing some more now
Edit2: I can now open some missions that didn't work before, testing more.. -
When trying to load almost all missions I did in the past, the ME leads to a CTD. I was only successful to load a single mission in Caucasus.
I thought the issue was loading the map, as it crashed before showing the map textures, but I could create a new mission on Syria, and afterwards load an existing one lead to another crash.
I also removed all mods before trying again and now uploading the logs.
-
Yup have the Tacview as well
Tacview-20220228-232416-DCS-11TSG-PG-Fightertraining.zip.acmi
-
When cranking hard (feels like bank angle + ATA > 50), lock or track gets lost regularily.
Possibly happened on the second Phoenix launch, STT lock was lost, but the missile looks like it still tracked of some sort (overlofted massively though).
Very hard to really confirm from a user perspective, but no other explanation of a lost lock over the sea with MLC out.
Trackfile:
https://drive.google.com/file/d/1exQKBI1dAMI5QmkSXr2pu5ACqcGoe1hZ/view?usp=sharing
Wheels getting stuck in the ground, rollover and crashes
in Bugs and Problems
Posted
Ok it can be closed, I had some ammo crates standing around in my ARP Pit within my FOB, removing them cleared the issue.