Jump to content

twanmal

Members
  • Posts

    66
  • Joined

  • Last visited

Everything posted by twanmal

  1. So then some "instant action" missions will not run properly like the battle for Zugdidi. I changed the 2 guv's on station 2 and 3 for some rockets. Mi-24P_CAUC_IA Peer Attack.miz
  2. Ok, there seems to be a conflict between tobi eye tracker/opentrack and the VR. I closed all the track IR applications and it's running well now.
  3. In non-VR, I can use the ATGM with asking the gorge AI 1) looking for target 2) Select one in the list and 3)aim and shoot. In VR ( crystal and open-xr quad view ) I do see the crosshair with the first missile, and can shoot normaly but after the first shot, George-AI is unable to find any new target or sometimes any target anymore. I'm a beginner with the hind. What I did previously : repair/complete-repair delete the DCS core folder and redownload it delete the DCS saved games folder after the new install but the problem in still there. Any clue ? Please find the trackfile in attachment the 23MB one is in non-vr, the 12MB is in VR. 4YA_Mar_PVE2_V2.58[03_JUN_BKN]-20240110-150036.trk 4YA_Mar_PVE2_V2.58[03_JUN_BKN]-20240110-152604.trk
  4. Hello, since the last update I'm not able to replay any multiplayer track with the error : "ALERT LUACOMMON (Main): Error: GUI Error: [string "./MissionEditor/modules/me_route.lua"]:2426: attempt to concatenate local 'action' (a nil value)" DCS stays stuck at "Terrain Graphics Init: 96 marianna islands.ng5" made today. It is the same error on every older track file with its corresponding map name. Switching back to version 2.9.0.47168 I am able to load the trackfile made prior to the latest openbeta update. Anyone having a comparable issue ? Or any idea about where it does come from ? dcs.log dcs_29047168.txt
  5. I had no liveries folder in saved games, neither in the core DCS Folder so I understand the question. Impossible for me to know that the right name is F-15ESE. Anyway thanks for the Answer.
  6. i first tried yesterday with a pimax crystal. And I could not read any stick in the proximity of the battery switch. First I had to check if all rendering buttons were at max in the pimax software. But it did not make any difference. Very sad. I'll try with the pixel density, hoping that it will not brake the fps too much. [update] going to 1.1 PD makes a good improvement, fps@45 on ground
  7. for me it doesn't run, as if I would install the updater the first time.
  8. Is there a possibility to update the updater and keep all my settings ? With all, I mean my dcs presets and the special settings in the updater app settings for external applications. I tried to update from 2.0.0.35 to 2.0.0.36 with no joy. Also there 4 different settings folder in the AppData
  9. I'm trying to correct the mission 2. As there were no voices after switching to radio 2 I switched all the coms coming from the awacs-TU-95 in the trigger to match his frequency. So I replaced the communications coming from 138 to 130, and now we can hear the TU-95 give info/orders. Strong WIP, not intensively tested. If someone is willing to work on it or even discuss about it, feel welcome. Mission 02.miz
  10. I could not reproduce since recently. I will provide a track if this happens again.
  11. not what I was meaning, I use the updater to be able to start dcs with different options like VR or 1 screen or 3 screen.
  12. as in the non-mt the cockpit is in english as it should, I compared both logs and saw the following differences : mt log : 2023-04-21 17:22:43.203 INFO COCKPITBASE (Main): WebRTC VOIP init: registered radio receiver "ARC_U2" with id - 6 2023-04-21 17:22:43.253 ERROR_ONCE DX11BACKEND (5676): texture 'mirrors' not found. Asked from '' 2023-04-21 17:22:43.263 ERROR_ONCE DX11BACKEND (1720): Can't load 'Fonts/font_general_RU.dds' in texture array ''. 2023-04-21 17:22:43.335 ERROR_ONCE DX11BACKEND (5676): texture 'mfd0' not found. Asked from '' 2023-04-21 17:22:43.402 ERROR_ONCE DX11BACKEND (12560): texture 'mfd3' not found. Asked from '' 2023-04-21 17:22:44.449 INFO JSAVIONICS (Main): initState OK non-mt : 2023-04-21 18:02:14.565 INFO COCKPITBASE (Main): WebRTC VOIP init: registered radio receiver "ARC_U2" with id - 6 2023-04-21 18:02:14.627 ERROR_ONCE DX11BACKEND (2332): Can't load 'Fonts/font_general_RU.dds' in texture array ''. 2023-04-21 18:02:14.712 INFO JSAVIONICS (Main): initState OK
  13. here is a tacview file where I try first in BS-3 to destroy some targets, then the same in BS-2. I hope that you can make something with the tacview file ? Tacview-20230410-111403-DCS-4YA_Mar_PVE2_V2.29[01_MAR_SCT].zip.acmi
  14. During some multiplayer mission I could see that on a BS 3 the vikhr were less effectiv to destroy tanks than with the BS 2. Is it wished from ED ? If not, how could I further investigate/help ?
  15. After loading the start up training mission with the hind, the whole cockpit is in russian. With an instant action missions it goes back to english. also with the non-mt version the startup training mission cockpit is in english. can someone confirm ?
  16. I just gave a try to change the Nvidia control panel settings to the folder bin-mt as figured above, with prefered maximum performance, multithreaded optimisation on and max fps to max. It doesn't change the cpu bound message but on one of the most CPU demanding single player fast mission - Ka-50 syria ground attack easy- the frame rate is constantly at 30fps, which is much better than before. Previously there were a lot of stutter, even with the mt dcs version I have a 12900k, 3090, and a Reverb with motion reprojection on in openxr.
  17. my mistake, the same is happening with Kneeboard or with the control overlay. I just gave a look to the MT fog issue above, yes it is the same. If you need any information I can help this week.
  18. I don't know if you can see the problem only with the track file. I send you 2 pics to see the difference mi-8coldstart.trk
  19. with the G2 and openxr, it does not occure anymore by switching "motion Reprojection" to "Disabled" in OpenXR Runtime. This is surely not what we want, but I hope it may help some of us.
  20. When activating the control overlay (ctrl enter) on the mi-8, the vue is now changing as if there were fog everywhere. It comes back to normal when deactivating the overlay.
  21. Thanks a lot for this detailed testing. I will check it.
×
×
  • Create New...