Moki
Members-
Posts
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Moki
-
I appreciate everyone's feedback and help. I did a complete uninstall of DCS and simapp to start over. I will have to check it out tomorrow to see if everything is correct. As far as I know, the last time I was working on my displays everything was correct but will double check and make sure they are close as possible and no gap. My luck its probably something extremely simple I am missing lol.
-
I have my Nvidia surround make my triple montiors into one, I think it came out to be 7600X1440. When the MFDs added, it changed to 7680Xwhatever it was. So that part seems to work, I havent tried disabling full screen mode, so I can give that a try. Simapp created a LUA to reflect the MFDs added to my screen size, so I can take another look at that too. I appreciate the help, I am going to look at the guide and see if I cant figure this out. Also side note, I saw a previous post of yours about moving the Comm menu to the middle of the screen. I need to work on that too ha.
-
Hi all, I am at a loss on what is going on with DCS and my Winwing MFD setup. I used the Simpro app to setup my MFD's, established which screen goes on the left and right, have the drivers installed, the lua file it creates etc but when I go to login into DCS, as soon as I get to the main screen it just completely goes white. The very first time I got it to work, I didn't have this problem and didn't do anything different the next day. I have no idea what is going on and not sure if anyone else has had the same issue. For those you may wish to know I have a Ryzen 9 CPU, NVIDIA 2070 Super, 32GB of RAM.
-
Hi all, I am at a loss on what is going on with DCS and my Winwing MFD setup. I used the Simpro app to setup my MFD's, established which screen goes on the left and right, have the drivers installed, the lua file it creates etc but when I go to login into DCS, as soon as I get to the main screen it just completely goes white. The very first time I got it to work, I didn't have this problem and didn't do anything different the next day. I have no idea what is going on and not sure if anyone else has had the same issue. I am not sure if I am in the right forum section and was also going to post this in the MDS support page too. For those you may wish to know I have a Ryzen 9 CPU, NVIDIA 2070 Super, 32GB of RAM.
-
Warthog throttle pinky switch replacement, UK edition.
Moki replied to deltawhisky7's topic in Thrustmaster
So this may sound dumb, but I can't find a way to put my credit card info on that site. I click the credit card button but there isn't a field that shows where to enter it.- 13 replies
-
I use the left throttle on the Warthog for the throttle and the right one for collective. I use the same for the KA-50 and works perfectly for me.
-
{ ED INVESTIGATING } MFD Text and symbology messy with latest update
Moki replied to Foogle's topic in Problems and Bugs
yea I cant read anything either and I am not using VR. Didnt have this problem before, it looks like everything is in a bold font and cant read anything. -
With the new patch update in open beta, the harrier MFD labels are beyond blurry. It’s like they are too bold of a font. I have used the gain and other buttons but still blurry. I never had this issue prior to the update and if I didn't know which buttons to hit, I wouldn't know where to click. Anyone else having this issue or how to fix it? I dont have this problem in the F18 or A10
-
Issues Installing The Game- Help Greatly Appreciated!
Moki replied to Warthog4569's topic in Installation Problems
mine doesn't even load after I got an update today. It freezes in the main menu and cant see any of my modules. so annoying -
Hi all, I wanted to write some suggestions out that could be beneficial for gameplay. 1) suggesting have a waypoint system upload. In the F10 map you can map out your waypoints and save it so it can be uploaded to any plane you choose. So if you died, you can just re upload it. 2) Simplifying the triggers in mission Editor. Have it where you can map out an area, choose what happens in that area with drop down options. The whole flag and making sure you select the right flag can be a bit much. 3) Also suggesting templates in the mission editor. Like fighters, bombers, SAMS etc. I can select the map I want to fly on, how many enemy fighters I want and they can spawn at different times and locations. Happy Holidays all
-
What forum is that? I thought this was the suggestion one?
-
I was suggesting have a waypoint system upload. That in the F10 map you can map out your waypoints and save it that can be uploaded to any plane you choose. So if you died, you can just re upload it. Also suggesting templates in the mission editor. Like fighters, bombers, SAMS etc. I can select the map, how many fighters I want and they can spawn at different times.
-
Targeting pod wont re-center or skew when it is SOI for F-18
Moki replied to Moki's topic in Controller Questions and Bugs
The main issue is that I cant get the targeting pod to move, I can only zoom in. I will check out those videos.- 3 replies
-
- targeting pod
- help
-
(and 1 more)
Tagged with:
-
Hi all, I am getting back into DCS after a 6 month break. I am having trouble with my targeting pod not being able to skew left and right when it is SOI on my MFD (yes the diamond is on the correct place). I can only zoom in. I also cannot re-center the pod when clicking my uncage button. I currently have the Hotas and I attached my key bindings below. I have my sensor on my joystick, TDC on my throttle and TDC horizonal and vertical assigned the little black ball. I do not currently have the TDC Slew assigned, I am not sure if that is the problem. Thanks again for your help Throttle - HOTAS Warthog {DB54B4B0-C2A7-11ea-8002-444553540000}.html Joystick - HOTAS Warthog {DB548DA0-C2A7-11ea-8001-444553540000}.html
-
Hi all, I am getting back into DCS after a 6 month break. I am having trouble with my targeting pod not being able to skew left and right when it is SOI on my MFD (yes the diamond is on the correct place). I can only zoom in. I also cannot re-center the pod when clicking my uncage button. I currently have the Hotas and I attached my key bindings below. I have my sensor on my joystick, TDC on my throttle and TDC horizonal and vertical assigned the little black ball. I do not currently have the TDC Slew assigned, I am not sure if that is the problem. Thanks again for your help Joystick - HOTAS Warthog {DB548DA0-C2A7-11ea-8001-444553540000}.html Throttle - HOTAS Warthog {DB54B4B0-C2A7-11ea-8002-444553540000}.html
- 3 replies
-
- targeting pod
- help
-
(and 1 more)
Tagged with:
-
Hi all, I have 3 monitors set up and I turn it into one big monitor when playing the game. My prompt action selection (wingman, ground crew etc) is all the way over to the far right, is it possible to make that prompt be in top right of my middle screen so I don't have to completely look away? I did not see anything online about this so I apologize if this has been answered before. Thanks
-
Hotas Warthog Throttle binding for Left and Right Thrust F-18
Moki replied to Moki's topic in Controller Questions and Bugs
You sir are a life saver. It worked and thanks all for you helped and responded. I truly do appreciate it -
Hotas Warthog Throttle binding for Left and Right Thrust F-18
Moki replied to Moki's topic in Controller Questions and Bugs
I can see the throttles move in the axis command part. I have it as left and right thrust accordingly. One thing to point out in the F-18 when I go to move my throttle to turn the plane on, in the game it doesnt move. I got in my A-10 and i can see the trottles move as i am moving it on my hotas -
Hotas Warthog Throttle binding for Left and Right Thrust F-18
Moki replied to Moki's topic in Controller Questions and Bugs
I will search for that and see what I can come up with. I appreciate you taking the time to help me. -
Hotas Warthog Throttle binding for Left and Right Thrust F-18
Moki replied to Moki's topic in Controller Questions and Bugs
dumb question of the day...Do you know which category or where it would be in the drop down menu? I didnt see anything like that but I could have easily missed it. -
Hi all, I am getting back into DCS and I had to rebind most of my keys to my throttle and joystick. I am running into the issue where my engine left and right power levers on my Hotas are not making the engine move in the F-18. I currently have them binded to the left and right thrust in the axis command but when I go to turn my plane on, the levers do not move in the plane. Is this a bug? I am doing the F-18 real controls and I went through the whole list to find left engine or right engine controls and have not seen any. I dont know if attaching my saved profile will help but I would greatly appreciate any help. Thanks
-
Hi all, I have been watching new tutorials for the F18 on Wag's channel and I was wondering if anyone had a button layout that he uses for HOTAS throttle and stick? Some of his videos he was flying through controls and I am like whelp back to the drawing board. Thanks
-
When you plug in the MFD's, there will be a light at either the top right or left. That's how you know which side it will function towards.
-
Hey man, Do you all happen to do iRacing?