Strale

Well i have 2 different USB Hubs, both ORICO and both powered. one is 7 port the other is 13 ports with supplier that can deliver 5Amp. so not thinking to an Hubs problem

Holy Crap ! it happens to surf some pages and finding an old friend ! Nice to see you're still "alive and kicking" and that you didn't left the party !

Ciao puoi mandarmi le foto di Orion 2 + Damper, Cam and Springs kit + F/A-18 Grip -> 300 euros E se puoi anche della parte della base per vedere se riesco a montarla sul mio setup ? mi stai tentando Ciao

Heiling, which type of USB 2.0 Hub did you buy ? thanks

Did you solve ?

I don't have any bodnar boards connected, have on the MOBO 4 USB 3.1, 1 USB 3.2 and 2 USB 2.0 but they're not enough so i'm also running a 7 port ORICO Usb 3.0 powered HUB where i connected all the hotas and track-ir then a 12 port Orico USB 3.0 powered HUB where I connected teh AN/ALR and the PSI indicator. Also tried a startech 7 port usb powered external hub but same results. I ha to remove a 2 years Orico 5 port 3.0 usb pci-e board that was using a Via chipset that was probably conflicting and often showing the yellow triangle in device manager. Will try to buy a brand new PCI-e board and trying if i can get rid of those external hubs ... even if the ECM Brain is giving troubles too and it's connected to the usb on the mainboard.

Hi VInc, with the help of Kieron i was eventualy able to make some stuff working using Skunkworks and connect-to-serial i have Com3 AN-ALR Com4 Ecm-Brain (that connects several mip panels and lights) Com5 IFEI Com9 Cubesim UFC Com10 the Psi indicator Com11 the Left Side Consolle I was able to connect IFEI, CUBESIM and LEFT SIDE CONSOLLE with no issue at all AN-ALR i see the data flowing but it's unstable ... sometimes it works some other not ! Com4 and Com10 the data flow stop after 1 or two lines no matter if i close and launch again still same problem they stop receiving data from DCS. Skunkworks latest version I read that the "connect-to-serial" seems a little bit oddy read other guys having troubles but it seems nobody still found a solution. Any Ideas ?

FlightPanels FORK ? shouldn't be DCSBIOS SKUNKWORKS the one to choose ? anyway I will give it a try even if i tried on W11 with no results. will check again. Yes tried it too when was running the new rig on the pre-installed W11 but I also was experiencing disconnection of the commports and strange behaviour on IFEI (for example) or annunciators. Damn with the I7-7700K and GeForce 1080ti everything was running even if i was suffering low performances. it's really frustrating having upgraded to an I5-14600 with 64Bg and a 4070TI Super on Z790 MSI motherboard and suffering all these issues !

Ok seems to be an old post but @electricaltill i'm posting the same question that @Heling posted, Did you find a solution for the Com Ports ? I'm putting all my stuff together (everything commercial, TekCreations and Cubesim) and even if it seems DCSbios Hub is finding and connecting each com port, after launched the sim something breaks and from the web comms still seem connected but they can't be disconnected and when switching to Dashboard and back to the connection all the com ports are gone. Thanks

With the panel !

If there's anybody out there willing to sell their GEMINI i'm the one looking for it. Preferably in EU to avoid extra shipping and custom fees. Thanks

BUMP

BUMP

BUMP

BUMP