Jump to content

dsobbe

Members
  • Posts

    187
  • Joined

  • Last visited

Everything posted by dsobbe

  1. The laser is on. I can lock the target with the aiming reticle, but the missile ignores it. .l
  2. I''m still using BS1 because it has no bugs and just works. After some time away from it i started playing again and found that the Vikhr tracking isn't working. I can locate and lock a target. However, when the missile is fired it just slowly descends and impacts the surface in an unguided manner. I've reviewed the targeting procedures in the manual. Everything is set correctly. I suspect the error is mine. Can anyone straighten me out on this one. Thanks
  3. Thanks for the explanation. It appears that my copies are protected. That's OK. They are great just the way they are. :)
  4. Thanks for the reply. I've tried several things mentioned on the forum to edit these files, including changing file names, but with no result. Whenever a Vergeev mission is loaded into the mission editor only the map appears centered over the Adler airbase. Nothing else. I cannot unhide anything. If I change a property of any object the map is zoomed out all the way and still no objects appear on it. I don't know what you mean by "just use the ME, ""exactly like Leroni did"" to create these missions". How did he use it?
  5. I'm running Vergeev Group, english version, under BS 1.0.1. (Yeah. It's old but works). Can anyone tell me how to edit these files? Thanks
  6. Line equipment is loosely defined as any machines used to service or move aircraft. In BS, fuel, oil, APU and fire trucks are line equipment usually parked near control towers. The briefing instructions state, "Park at the east end of the south ramp, near the line equipment parking and access road." Use your landing light to help you find the access road. If you park just west of the access road you'll be in the trigger zone that will initiate a jeep to come down that road to pick you up, and also a fuel truck to arrive.:thumbup: Dsobbe, author of Detachment to Batumi
  7. Actually, it is realistic. In the real world the KISS (Keep It Simple Stupid) method is often much safer, simpler and more efficient than trying to configure complex navigation systems just to get from point A to B. Especially on short routes.
  8. If not, then why can it be rotated with the Desired Heading Set Knob on the lower left corner of the HSI? I did see it slaved to the autopilot in a youtube video. But, I can't find that video again and there was only a passing mention of it being used in that manner.
  9. I'm using Black Shark 1.0.1. The course and heading source switch to the right of the HSI on the fromt panel only works in the Auto position. In the manual position the helicopter will not track the heading bug on the HSI. Am I not setting the autopilot properly for manual heading, or is the Manual source switch position not working? Thanks
  10. I too had a lot of trouble with 1.0.2, unrelated to other programs. And considering DCS's history of patches and fixes for all of the follow-on versions with the only real improvement being graphics, decided to stick with 1.01. It just works.
  11. Thanks for the link. I sent Leroni a post asking if Vergeev Group would work with Black Shark 1.01. Don't have an answer yet. But, I seem to recall that the first "version" did. At least the demo files worked. So it's likely that your copy would. I haven't seen a source for the original files. I would greatly appreciate it if you can send a copy to me.
  12. Downloading now. Thanks for help guys. Well, not quite. The above links are either no longer working or don't accept PayPal. Anyone have another suggestion?
  13. I am still using Black Shark 1. Is the original Vergeev Group that runs in that version still available. If so, where can I obtain a copy? Is it available in English? And, if payware, who accepts PayPal? Thanks
  14. In the very few installations that I found IRL general aviation aircraft, a fuel meter switch provided a quick off-on check that the gauges had power or weren't stuck. But it wasn't commonly used in normal flight operations and generally left in the on position; perhaps because aircraft fuel meters (gauges) are historically unreliable. The only reliable fuel meter has always been a clock and knowledge of a particular a/c's fuel burn per hour.
  15. You're right. After a lot of reading and editing I found that line should read: start "" /d "C:\Program Files (x86)\Eagle Dynamics\Ka-50" bin\stable\launcher.exe --Console A matter of the quote mark (") being in the wrong place. My batch file is located in \KA50\. That is why the quote mark is there. There is also a discussion of this kind of problem here: http://simhq.com/forum/ubbthreads.php/topics/2642228/help_needed_launcher_exe_has_s.html At any rate, My batch file now starts and then closes all three programs cleanly and correctly. Thanks for your input. :thumbup: dsobbe
  16. For many years I've been using a batch file to start Black Shark 1.0.1, Voice Activated Commands and TrackIR5 under Windows Vista. I recently installed Black Shark 1.0.1, Voice Activated Commands and TrackIR5 under Windows 7. The batch file starts both VAC and TrackIR, but displays "Cannot find Console" in the command prompt and does not load Black Shark. I've tried deleting "--Console" but Black Shark still does not load and displays "directory is invalid" in the command prompt. @echo off REM Start BS, VAC and TrackIR. Then, close BS and VAC. start "" "C:\Program Files (x86)\NaturalPoint\TrackIR5\TrackIR5" start "" /d "C:\Program Files (x86)\Eagle Dynamics\Ka-50\bin\stable\launcher.exe" --Console start "" "C:\Program Files (x86)\VAC System\VACSystem.exe" MyShark.xml,True echo To close VAC pause taskkill /im VACSystem.exe taskkill /im TrackIR.exe I'm not up to speed on Window 7 batch files or scripts. Can anyone tell me how to modify this batch file, or write a new file, to start Black Shark? Thanks
  17. Here's one. Here's why. I don't care if fly specs aren't visible on the windscreen and paint chips on the floor boards. I do care about reliability and stability in the software. :thumbup:
  18. I am also running Black Shark 1.0.2. It sounds like you are using too much power at takeoff and while turning. Increasing throttle also increases collective. Adding too much or too fast will generate an overload warning that can lead to a blade strike.
  19. You got it right. Don't try to do it all yourself. Use your wingman. He can usually find threats you don't see. Also, figure out what's going on. Sometimes, just clearing out the threats to an advancing column will allow them to take out any threats to you. Teamwork. :)
  20. Just for info, I'm still using BS1 and it has the visible pilot. TrackIR allows you to move your head, and view, forward, backward and side to side. Then you can see all of the side and rear panels, even with the pilot visible. Check the TrackIR manual and program to find out which axis controls those movements. But even being able to see the panels with TrackIR it's still sometimes easier to use the default NumPad 0+3 keys to view the right hand panel as you get a larger fixed view; which makes it much easier to throw switches and push buttons.
  21. Agreed. I began to suspect it was all going sideways early on and stopped upgrading/patching at 1.01, when the ADF stopped working but everything else did, and before you had to download a fix for 1.02 just to get English back, again. The only reason I'm still here is the great bunch of people on this forum who help each other out. :thumbup:
  22. I'm still using 1.0.1 because its stable. The next version, 1.0.2, replaced English text with Russian. After that, the next patch introduced more undesirable changes. Now, DCS World and BS 2 greatly improve graphics. But ,basically, it's the same sim as Ver. 1. Plus, you need to run it on a 64 bit machine to get the best performance. When I need a new machine I'll probably upgrade BS. You may be right about players. Still, there have been 70+ downloads of my latest 1.0.1 mission. I was hoping that someone might know or could provide a link to some info on the ADF's implementation or statis under ver. 1.0.1. I recall that it did work in the original release, ver. 1.0. Its operation became intermittent, depending upon the version, patch and/or then current program fix. Thanks for the reply.
×
×
  • Create New...