Death-17

YUP You guys are absolutely correct, didn't change a thing. As soon as I'm finished with updater I will follow your instructions. Keep you posted.

I'll try reinstall I'm reinstalling DCS World to see if that will fix it. Thanks

More help Under "UH-1 Huey Sim" tab there is no AI commands. They are there under the "UH-1 Huey Game" tab but not on the sim tab. I went into my Eagle Dynamics folder under DCS World but could not find Saved Games folder to move the keyboard inputs.

Where do I start? When I'm in UH-1 sim mode under the control menu I cannot change my gunner's firing mode.(i.e. HOLD or RETURN FIRE) When I turn on "Game Avionics" I can change their mode but I cannot set the axis on my collective under UH-1 Game in the controls menu, so I can't run "Game Avionics".(no collective) What am I doing wrong. While I have you here, is there any way to put the instruments on a second monitor?

I have a 32" main monitor and a 17" secondary monitor. Is there any way to get the instruments on the second monitor in DCS Huey?

In DCS Huey in "controls" it sees my Saitek throttles but will not let me assign them. If I unplug all my cards and controllers and just leave the throttles it does not show a throttle assignment under Axis commands.

When I try to register for login it says invalid serial number.

Duh, Sim Mode!!! Sorry for the mental regression. Thank you

I am using an X52 Pro Throttle for collective on the UH-1 Heuy. I have gone into controls and assigned the Z axis for collective but when I start the game it only recognizes the slider for collective. I've tried assigning keys to the Z axis through the Saitek software but it still only sees the slider. I had this problem with BS but I can't remember what I did to correct it.

I am trying to install DCS BS ona new computer. I installed DCS BS 1 and everytime I try to launch it so I can put in my code and continue to install DCS BS 2 it say Launcher exe has stopped working. This is the details of the error: Problem signature: Problem Event Name: APPCRASH Application Name: Launcher.exe_unknown Application Version: 0.0.0.0 Application Timestamp: 4933f34b Fault Module Name: SDL_mixer.dll Fault Module Version: 1.2.8.0 Fault Module Timestamp: 4832cba3 Exception Code: c0000094 Exception Offset: 00007796 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 2b61 Additional Information 2: 2b617c6f27ff96e0da4a895faba60808 Additional Information 3: c5f0 Additional Information 4: c5f0f157ba747825ad8c90ffa769ff60 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 My new com has win 7 64 bit, 6 gigs RAM, Nvidia GTX 560, AMD 3.4 Quad core processor

Between computer crashes and changing computers I have ran out of activations. Can I get another one or do I have to pay for game again?

Sorry guys, I forgot to restart after install. Works fine now.

I have installed the new BS 2 upgrade. I can access all the menus and everything works fine until I go to fly a mission. It says "DCS Warthog has stopped working" then returns to the after mission screen where you can save it or fly again. I do not have DCS Warthog installed, only BS. Do I have to have Warthog installed, too? Please, help.

Does BSVP work with MODMAN installed? Mine does not, but I recently reinstalled BS...maybe that's why BSVP is not working with MODMAN? I have BSVP networked on another com..it works when I do not use MODMAN.

I'm trying to install a second, older PCI card, to use for a third monitor. When I boot my com with the old card in it , it only uses the old card for display. In Device Manager, under Display Adaptors, it says both cards are working properly and drivers for both are installed. In BIOS, under Primary Video Controller, it lists the following options: GFXO-GPP-IGFX-PCI GPP-GFXO-IGFX-PCI PCI-GFXO-GPP-IGFX IGFX-GFXO-GPP-PCI The PCI-GFXO-GPP-IGFX is the one that is high lighted at boot up. The older PCI card is a GForce MX440. What am I doing wrong? I have not installed the SW (SoftTH108b) for BS to see the second card, yet. Wanted to make sure I get the cards straight first.

I got the idea from BadCrC, I'll try with him. I know that's how he hooked up his Shkval monitor. Thanks for the input.

In BIOS, under Primary Video Controller, it list the following options: GFXO-GPP-IGFX-PCI GPP-GFXO-IGFX-PCI PCI-GFXO-GPP-IGFX IGFX-GFXO-GPP-PCI The PCI-GFXO-GPP-IGFX option is highlighted now. Both cards are listed in Device Manager under Display Adaptors. Everywhere else it just sees the older PCI card. Thanks for the reply

I am trying to add a third monitor for my BS pit by adding an older PCI vid card. When I boot up my com after installing the card it only lets me use the old card. Both cards are seen by device manager and are "working properly". The card I'm adding is a Gforce MX440. Any help would be great.

I am trying to hook up a second, older PCI type, video card so I can have Shkval on a third monitor. When I boot up my com it only sees the older PCI card. Under display adapters they are both listed and working. How do I get the computer to display on my original card. The older PCI card is Nvidia MX440.

Thanks again CrC, and that Tyger guy has a good point. I would like to see your sim in action.(english if possible! The one on Youtube is in French)

Thanks CrC, Opencockpits is an awesome site. Someone in the forum told me I could get a third monitor by putting an old video card in one of my pci slots. Is this true, the computer would recognize a second video card? I have my shkval and ABRIS on the same monitor right now. I just want to separate them and I have no need for triplehead2go(42 inch main monitor), but my video card only has 2 outputs. ANd thanks again, your pit is the sweetest I've seen. It gave me so many ideas. I'll post pics of mine as soon as it gets halfway completed.

LEDS Bad CrC, how do you get the LED's to work with the game? (i.e. landing gear, master caution, etc) And how do you hook up so many monitors? (sorry if these questions have already been addressed)

The SW I downloaded only recognizes 2 of my cards, I have 3 bodner cards hooked up. 2 of the cards are identicle, is that why it only sees 2?

1. I have Bodner I/O cards. They work great for switches but when I switch the toggle it stays on, so in order to activate the switch I have to flip it up and then back down so the next time I activate it will turn off. Or do I have to have all momentary switches? 2. How do you get the toggle switch safety cover to work with the sim? Or are they actually not operational in some of the cockpits I see on the forum? 3. How do you get the game to output LED lights, like landing gear, caution lights, etc.?

Anyone having the problem with NVG mode screwing up the aspect ratio in the new patch?