Ramtin

I will try this one for sure and report back. I too had this stuttering issues when looking sideways in MT mode.

The problem where you switch views and your fps crashes it most likely have to do with vram getting full and it getting passed on to gpu shared memory which is much slower …so I would try what he says to avoid this f2 crash

For me mt stutters as well when in look sideways where it doesn’t ik st

See video. This only happens with multithreading in VR and in the left lens only. The right lens behaves normally. ST doesn't have this problem. dcs clip.mp4 dcs.log

I seem to get these extreme fps sinks, with the game getting stuck in very low fps forcing me to wait untill it returns back to normal. Sometimes its harder than other times and escaping back into the menu doesnt improve it, untill gpu shared memory gets emptied again. It always seem to have to do with this gpu shared memory. I have a 3080 combined with 5800x and 64gb ram. I am able to trigger this fps sink by: restarting mission going to the map and getting back into the cockpit random moment within mission, without any logic nullAs you can see in the images, the fps goes crazy. I have to wait untill the gpu shared memory empties itself. Then it returns back to normal untill it gets triggered again. Mods make no difference in this. without mods it still occurs. I also prioritized dcs in the procces tab and didn't see anything else taking much recourses. Besides this terrible issue, I don't see massive gains. Although my first impressions seem to be that the fps doesn't get affected by other units as it did before. But some stuttering remains.

Thanks man. Do you have an estimation of when this new version might get released?

Hello Skatezilla, as you know the latest update introduced the necessity to add --force_enable_VR --force_OpenXR, when wanting to use openxr natively. My problem now is that these prompts can only be given to the shortcuts and I only use your utility to start dcs which (i believe) starts the original exe file in the bin folder. Unfortunaly I dont see a way to add this prompt in the same manner with the original exe. How can I solve this?

How does this work when you use the updater utility by skatezilla? I can't edit the target in the actual exe in the bin folder. This option only seems available in the shortcut properties. And the updater uses the actual exe from the bin folder so that doesnt work.

I cant wait to see vaicom improved even further...I also don't have a problem with it becoming free....I think this was also the intention when Hollywood_315 put it online

Just to confirm if I understood correctly. Does the GPL, including source code mean that the kneeboard will probably get fixed as well in this first community release right? Will this result in continued existence including adaptation to new modules and new ATC from Vaicom in the future? At least the possibility to adjust the software accordingly is here now right?

Awesome news! This means that Vaicom pro will remain with us in the future and hopefully keep improving with the help of the great community. For now I will postpone updating to 2.8 and leave my vaicom intact to see how this plays out. I am not sure if I will have to reinstall the free version now, but I will wait and see untill the community had the chance to get into it with a more stable fix for 2.8 and beyond.

Is the developer from the Netherlands? I live in the Netherlands but without a phone number or adress there isn’t much I can do.

" I solved the situation by lowering TEXTURES...I can leave terrain textures to high and that seemed to have solved the problem" I explained it here. lower textures, not terrain textures. That gave me enough headroom.

For me (3080 and 5800x 32gb ram) I solved the situation by lowering TEXTURES...I can leave terrain textures to high and that seemed to have solved the problem...apparently airplane textures etc take quite a toll on vram and I had it constantly happen in the cerberus north campaign which has a lot going on...lowering textures prevents me from running out of the neccessary vram

It's driving me nuts as well, but unfortunately this thread seems to be dead. Also I have a ticket open, but ED doesn't seem to be very aware of what is the problem. Since they are only reccomending the standard solutions, like removing mods, turn of msaa, do full repair etc (which btw did not work)

I'm having a similair issue where the fps tanks at random moments and causes massive stuttering with no escape. Restart of dcs is needed to get it fixed only for it to start again later. I can also reproduce it by going into a mission once, going out of it and then going to the settings menu. That causes the same drop which I cant escape from. Pretty frustrating. A bit tired of DCS right now because of it.

I will do a playthrough once again and add the file. I’ll keep you posted.

This mission is weird for me. I never seem to get the new tasking ..only managed it once after trying the mission half a dozen times ..but like you i had no jsows

Even though a previous thread already described my problem which was also marked as fixed...for me the problem still persists at mission 11 I only managed to receive tasking order one time out of many attempts (accidentally used one jsow too many) im a bit tempted to skip this mission now, but I would want to try this first maybe there is a possible workaround basically I follow mission until requested to commit to the bandits...after destroying them with my wingman I get requested to return back to waypoint 3 and to release jsows at Max range...if i am correct, I should receive new tasking to engage the other targets...but this just doesn’t happen even after many attempts...the trigger doesn’t activate for some reason

so I would like to report that I am dealing with the same issue in 2022. I managed to get the new tasking order only once. Ran out of jsows so couldn’t complete the mission. Can’t reproduce it anymore and mission basically gets bricked after taking out bandits and flowing back to wp3. Cant complete the mission without tasking order triggering.

Hmmm I do select the super carrier beforehand and it seems to recognize the selection...I first say, Abraham Lincoln and then inbound. That works. then the menu pops up with my options. When I want to say the next thing in line, like established or see you at ten for case I. Then it says there is no super carrier or no participants selected. I really have to use the menu and then it works. But that's a problem ofcourse. Because even when I try to reselect abraham lincoln, the following messages don't work. I will try to fly some examples this evening and I will post the log here so you can see what I'm doing wrong.

By the way, this is the other problem I meant which I am having now. 2 issues, but one smaller issue. When saying stuff like "established" for the super carrier it says this...I think this is also the problem I had with " see you at ten" (I did purchase and activate the realistic atc extension): 10:13:09.170 Selected recipient is not a Supercarrier unit. 10:13:09.166 Recognized : 'established' 10:13:07.334 Listening resumed 10:13:07.328 Joystick : 'Transmit TX1 press' 10:13:06.929 Listening suspended 10:13:06.922 Joystick : 'Transmit TX1 release' 10:13:06.287 Selected recipient is not a Supercarrier unit. 10:13:06.283 Recognized : 'established' 10:13:02.085 Listening resumed Another problem seems to be a bug, where I issue the command: Request NVG's. Chief responds with, rearming complete, but that's wrong. The weird thing is in VA the correct command seems to have been given. But only way I can get the NVG's is to use the radio menu. I hope to hear a good solution. Especially the super carrier comms is kinda broken for me right now.

That seemed to be it buddy. I now only mapped TX1 and it seems to work..Thanks!

Hello, Below you can see what happens. I give the command remove the wheelchocks and it get recognized but nothing happens. While i'm sitting in the f-18 and it should be recognized. When I first say " options" and then say " remove the wheelchocks" again then it works. This is just an example. When doing a case I landing I say see you at ten and it says no participaints available, but through the radio menu it works. To answer your questions. I am using standalone, OB. The control panel is showing the f-18 and easy coms off like it always is. Since I prefer it that way. I will change it to 64 again, but that is when I had the ptt button suspended. I did read about the mp option, but mine was set to broadcast parallel and I thought they said that it should work with that box ticked. EDIT: After reinstalling 64 bit version of VA same problem again. it gets suspended right away no matter what options I choose in the VOIP control section. So from having no problems, I have all kinds of problems out of the blue. Very strange. Log is posted below as you requested. But keep in mind this is just the remove the wheelchocks example. Do I have to reinstall both VA and vaicom again?? 11:07:23.400 Listening suspended 11:07:23.377 Joystick : 'Transmit TX1 release' 11:07:23.367 Joystick : 'Transmit TX2 release' 11:07:23.359 Joystick : 'Transmit TX4 release' 11:07:23.354 Joystick : 'Transmit TX3 release' 11:07:20.017 Ground Crew: wheel chocks are now removed 11:07:14.020 Done. 11:07:14.020 Constructing message... 11:07:14.020 TX1 | SEL/AUTO: [ Ground Crew ] , [ Wheelchocks Remove ] 11:07:14.019 Recipient for Crew set by call contents. 11:07:14.019 Have result, identified as command: Remove the Wheelchocks 11:07:14.019 Captured sentence: remove the wheelchocks 11:07:14.015 Recognized : 'remove the wheelchocks' 11:07:11.058 Done. 11:07:11.058 Constructing message... 11:07:11.057 TX1 | SEL/AUTO: [ ] , [ Show Options ] 11:07:11.057 Have result, identified as command: Options 11:07:11.057 Captured sentence: options 11:07:11.053 Recognized : 'options' 11:07:09.255 Listening resumed 11:07:09.236 Joystick : 'Transmit TX1 press' 11:07:09.226 Joystick : 'Transmit TX4 press' 11:07:09.218 Joystick : 'Transmit TX2 press' 11:07:09.210 Joystick : 'Transmit TX3 press' 11:07:02.982 Listening suspended 11:07:02.956 Joystick : 'Transmit TX1 release' 11:07:02.952 Joystick : 'Transmit TX2 release' 11:07:02.940 Joystick : 'Transmit TX4 release' 11:07:02.934 Joystick : 'Transmit TX3 release' 11:07:01.749 Have result, identified as command: Remove the Wheelchocks 11:07:01.749 Captured sentence: remove the wheelchocks 11:07:01.744 Recognized : 'remove the wheelchocks' 11:06:58.639 (awaiting additional input) 11:06:58.638 Have result, identified as recipient: Chief 11:06:58.638 Captured sentence: chief 11:06:58.634 Recognized : 'chief' 11:06:57.051 Listening resumed 11:06:57.042 Joystick : 'Transmit TX1 press' 11:06:57.034 Joystick : 'Transmit TX4 press' 11:06:57.026 Joystick : 'Transmit TX2 press' 11:06:57.019 Joystick : 'Transmit TX3 press'

Hi, Thanks for the reply. After installing the 32 bit version of VA I don't get the suspended issue anymore. My command just doesn't seem to trigger anything. Only if I first manually pull up the radio menu. When I say remove the wheelchocks I see VA and vaicom recognising it, but nothing happens. It worked fine up untill recently. Now I cant use viacom anymore which is a problem for me since I use it all the time in dcs. I will see if I can attach a log file when I get home.