Wingmate Posted November 30, 2017 Posted November 30, 2017 Whenever I refuel either on the ground/ship or from any tanker the L fuel and R fuel lights will start flashing and not stop regardless of what my actual fuel state is. Additionally as soon as fuel is added by either of the above methods the fuel gauge will only show the total fuel level and display 0000 for your left and right tank regardless of what position the dial is in. This has happened in every mission I have made including nothing but the harrier on the ground and adjusting the fuel by the loadout editor. This picture was taken just after I left the tanker it shows both the flashing lights and the zeroed out internal fuel gauge https://imgur.com/a/fIX1e Having lots of fun with it anyways, thanks for a great product.
bart Posted November 30, 2017 Posted November 30, 2017 Not sure about the fuel gauge, but if you press the master caution button that should stop the fuel warning captions from flashing and they will stay lit until you refuel then they should extinguish. System :- i7-12700K 3.6 GHz 12 core, ASUS ROG Strix Z690-A Gaming, 64GB Corsair Vengeance RGB Pro 3200MHz, 24GB Asus ROG Strix Geforce RTX 3090, 1x 500GB Samsung 980 PRO M.2, 1x 2TB Samsung 980 PRO M.2, Corsair 1000W RMx Series Modular 80 Plus Gold PSU, Windows 10. VIRPIL VPC WarBRD Base with HOTAS Warthog Stick and Warthog Throttle, VIRPIL ACE Interceptor Pedals, VIRPIL VPC Rotor TCS Plus Base with a Hawk-60 Grip, HP Reverb G2.
Sneak69 Posted November 30, 2017 Posted November 30, 2017 Have the same problem even after master button is pushed. (Keeps flashing) Tot will refill with correct amount but the L and R tanks stay at zero. Sent from my SM-G930W8 using Tapatalk
LazyBoot Posted November 30, 2017 Posted November 30, 2017 I don't remember exactly how much I had when I got this issue, but I think I had about 1200-1400 total as I was approaching the airfield for landing. And I requested 100% fuel.
RED Posted December 1, 2017 Posted December 1, 2017 For me this happend every mission. AAR or refueling on the ground doesnt matter. Same for initial fuel amount or refueled amount. Once the wing tanks are empty, the display L and R Wing never changes from 0
Wingmate Posted December 1, 2017 Author Posted December 1, 2017 Sitting on the ground at Batumi with 28% fuel set in the mission editor I burned fuel until I got the flashing fuel lights (at 2100 total and 700 in both left and right) then I asked the ground crew to refuel me as soon as the started fueling the internal count zeroed itself and the lights could not be dismissed.
MrDieing Posted December 1, 2017 Posted December 1, 2017 Can confirm. Problems occur when the Low Fuel Lights start flashing. If you refuel after that the L and R indicator go to 0 in all selector modes (INT, WING etc.) Does not happen when you refuel before the Low Fuel Lights start flashing, then everything works as normal. ''Greed is a bottomless pit which exhausts the person in an endless effort to satisfy the need without ever reaching satisfaction.'' Erich Fromm
Sneak69 Posted December 1, 2017 Posted December 1, 2017 Can confirm. Problems occur when the Low Fuel Lights start flashing. If you refuel after that the L and R indicator go to 0 in all selector modes (INT, WING etc.) Does not happen when you refuel before the Low Fuel Lights start flashing, then everything works as normal.Yep 100% Sent from my SM-G930W8 using Tapatalk
kafete Posted December 1, 2017 Posted December 1, 2017 It happends too when you perform AAR with the C130, still flasing when you have low fuel tank level and no stop
Recommended Posts