dburne Posted August 28, 2014 Share Posted August 28, 2014 Hey gang, I have had my Warthog setup for over 2 years now, and it has started to develop a little slop around center. It is a little more pronounced around the Y axis than the X axis. I can see it when in the device analyzer, use to be I could move the stick, let it go back to center, and the analyzer readout would be 0,0 for both axis. Now it has a value, Y axis around 150-200, X axis a little less. I can slowly move the stick and it stops where I leave it, in that center slop area it now has. I have added an S-Curve statement to my profile script to add a little deadzone, took 5% on the Y axis and 3% on the X axis to where they consistently read 0 again when centered after letting go of the stick, to compensate for this. I wonder if this slop around center is going to continue to get worse though. Anyone else seeing this, anything I can do to tighten it up? Thanks for any tips, Don B My VKB Gunfighter MK III Pro L Review EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
aeliusg Posted August 28, 2014 Share Posted August 28, 2014 Look here: http://forums.eagle.ru/showthread.php?t=95575 Link to comment Share on other sites More sharing options...
dburne Posted August 28, 2014 Author Share Posted August 28, 2014 Thanks for the link, I will check that out. Don B My VKB Gunfighter MK III Pro L Review EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Recommended Posts