golani79 发布于2015年2月26日 发布于2015年2月26日 Just started a mission in the dark - I can use the panel flood lights and activate the UV Rheostat which lights up the instruments but after a short while they go dark again. Has anyone else tried it or experienced the same problem? >> DCS liveries by golani79 <<
ED Team BillyCrusher 发布于2015年2月26日 ED Team 发布于2015年2月26日 Rheostat shouldn't be at Max position for long time. This position for lamp ignition only. After light in on, you need turn the rheostat a bit counterclockwise or lamp will blow. Blown lamps can be replaced by repair. "You become responsible, forever, for what you have tamed.” ― Antoine de Saint-Exupéry, The Little Prince.
golani79 发布于2015年2月26日 楼主 发布于2015年2月26日 Thanks a lot - solved my problem! >> DCS liveries by golani79 <<
kontiuka 发布于2015年2月26日 发布于2015年2月26日 Rheostat shouldn't be at Max position for long time. This position for lamp ignition only. After light in on, you need turn the rheostat a bit counterclockwise or lamp will blow. Blown lamps can be replaced by repair.very neat.
Esac_mirmidon 发布于2015年2月26日 发布于2015年2月26日 Loving this details. " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
uboats 发布于2015年2月26日 发布于2015年2月26日 Rheostat shouldn't be at Max position for long time. This position for lamp ignition only. After light in on, you need turn the rheostat a bit counterclockwise or lamp will blow. Blown lamps can be replaced by repair. impressive detail! [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
arriflex 发布于2015年2月27日 发布于2015年2月27日 Do you just crank up the rheostat to light the lamps or are there switches?
msalama 发布于2015年3月6日 发布于2015年3月6日 :thumbup: This incredible amount of detail not only blows my cockpit light bulbs it seems, but my MIND. What a magnificent aircraft! The DCS Mi-8MTV2. The best aviational BBW experience you could ever dream of.
Diplocaulus 发布于2015年3月18日 发布于2015年3月18日 That explains a lot. Thanks! Windows 10 64bit / Intel Core i7-5820K Haswell-E 6-Core 3.30 GHz / 32GB RAM / GeForce GTX 1080 8GB / Dell UltraSharp 27 QHD U2715H 2560x1440 / Saitek X52 Pro Flight System / TrackIR 5
BitMaster 发布于2015年4月11日 发布于2015年4月11日 LoD !!! Get the wheel blocks in place and set your turbine to something above idle... The crew will refuse to take them off again unless you idle, drove me nuts till I found that out as I set for 48Volts right after starting the turbine and disconnect external power. The thing is, they disconnect external power at any power setting ( well, all that I tested, up to 6.5k taxi rpm ) but not the wheel blocks. I think this is great as it adds so much to what I expect from a simulation. Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
DieHard 发布于2015年4月11日 发布于2015年4月11日 My first day in this aircraft, today. This thread answers a few questions of procedures I have encountered. Thanks. [sIGPIC][/sIGPIC]
Big Peltch 发布于2018年11月8日 发布于2018年11月8日 Really neat, but annoying after a while. Took me sometime to realize this problem.
Wexler 发布于2018年11月28日 发布于2018年11月28日 Yeah, how many of them i burned before I opened the manual to check on these:-) Ryzen 7 2700X | MSI Trio 1080Ti | MSI X470 Plus Motherboard | 32GB Kingston HyperX Predator 2933 DDR4 | M.2 XPG GAMMIX S11 Pro SSD | Virpil Mongoost-50 throttle | Thrustmaster Warthog Stick | MFG Crosswind | Rift S
zeufman 发布于2019年2月1日 发布于2019年2月1日 Instrument Lightning seems definitively broken with DCS 2.5. rheostat to up to 50 %, wait for a time ( 60-90 sec ), and Nothing change. Wait for two minutes, always Nothing. Up to 100% and down 80 %, Nothing. I can see in the debrief that i haven't blow up the UV lamp. Unable to fly at nicht
gulredrel 发布于2019年2月1日 发布于2019年2月1日 (已编辑) Instrument Lightning seems definitively broken with DCS 2.5. rheostat to up to 50 %, wait for a time ( 60-90 sec ), and Nothing change. Wait for two minutes, always Nothing. Up to 100% and down 80 %, Nothing. I can see in the debrief that i haven't blow up the UV lamp. Unable to fly at nicht Works for me in 2.5.4 stable: Turning rheostat to 100%, when the white line on the panel begins to glow blue, turn down the rheostats a bit. It seems the fluorescent(?) paint on the instruments needs a bit of activation time. See both screenshots, the intensity increases after some time. edit: fixed typo 本帖最后于2019年2月1日，由gulredrel编辑
zeufman 发布于2019年2月1日 发布于2019年2月1日 yes you re right, it need to set 100% for the first time, and down a bit after the fluo light appear. Many thanks to you
已推荐帖子