Jump to content

1.5 Not Responding/Blackscreen on start


StJimmy

Recommended Posts

So I downloaded the 1.5 beta using the OpenBeta Standalone Client and it seemed to have installed/downloaded successfully.

 

However, whenever I run the 1.5 singleplayer or multiplayer exe, the game simply blackscreens and stops responding straight away. I can still hear the menu music in the background when this happens, and the game changes my screen to a lower resolution until I end the process.

 

I have tried updating/repairing using the DCS_updater cmd stuff, I have checked that my drivers are up-to-date and I'm pretty sure my computer meets the minium req's.

 

Have attached my dxdiag and latest dcs.openbeta log.

DxDiag.txt

Logs.rar

Link to comment
Share on other sites

Try to go into Task Manager, right click on DCS and choose "Switch To".

Does this help?

System specs:

 

Gigabyte Aorus Master, i7 9700K@std, GTX 1080TI OC, 32 GB 3000 MHz RAM, NVMe M.2 SSD, Oculus Quest VR (2x1600x1440)

Warthog HOTAS w/150mm extension, Slaw pedals, Gametrix Jetseat, TrackIR for monitor use

 

Link to comment
Share on other sites

I'v looked at your logs and looks like you are facing same problem that i'v posted yesterday http://forums.eagle.ru/showthread.php?t=148618

Still no solution.

Win 7x64 Ultimate

Gigabyte GA-990XA-UD3, FX-8320 3,5GHz, Noctua NH-U9B SE2 cooler, 4xKingston KHX1600C9D3/4GX, Sapphire Dual-X R9 285, Corsair ForceGT 120 SSD, OCZ-Vertex4 SSD, X-Fi Elite Pro, Tagan TG-600BZ PSU, Corsair Carbide 300R case

Saitek X52 FCS

Link to comment
Share on other sites

If you're an AMD User,

 

Please try this for me real quick:

 

Download The 15.5 Catalyst DLLs from Here:

https://drive.google.com/open?id=0B5cIIRNjrbc7V0ZVVi1ITnpxVVU

 

Extract the DLLs (Should be 4, 2x 32bit, 2x64 Bit, 2 are the DX11 Drivers the other 2 the CFX Profiles).

 

Place those 4 DLLs in the /Bin/ Folder with the DCS.exe

 

Open CCC, and Remove any DCS.exe profile (to avoid issues w/ drivers).

 

Run DCS.EXE


Edited by SkateZilla

Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2),

ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9)

3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs

Link to comment
Share on other sites

Download The 15.5 Catalyst DLLs from Here:

 

Got "Asmod, you do not have permission to access this page."


Edited by SkateZilla

Win 7x64 Ultimate

Gigabyte GA-990XA-UD3, FX-8320 3,5GHz, Noctua NH-U9B SE2 cooler, 4xKingston KHX1600C9D3/4GX, Sapphire Dual-X R9 285, Corsair ForceGT 120 SSD, OCZ-Vertex4 SSD, X-Fi Elite Pro, Tagan TG-600BZ PSU, Corsair Carbide 300R case

Saitek X52 FCS

Link to comment
Share on other sites

Same as Asmod above for accessing the file. I get a black screen when trying to go multiplayer and nothing else. When I do the first start of singleplayer DCS for the day, it goes black for up to a minute, but then loads normal. I figure its probably shaders or something loading.

 

 

Link to comment
Share on other sites

Dll injection did the trick DCS starts and looks like its running smoothly. Going to test it with a little more load on GPU

Win 7x64 Ultimate

Gigabyte GA-990XA-UD3, FX-8320 3,5GHz, Noctua NH-U9B SE2 cooler, 4xKingston KHX1600C9D3/4GX, Sapphire Dual-X R9 285, Corsair ForceGT 120 SSD, OCZ-Vertex4 SSD, X-Fi Elite Pro, Tagan TG-600BZ PSU, Corsair Carbide 300R case

Saitek X52 FCS

Link to comment
Share on other sites

Same as Asmod above for accessing the file. I get a black screen when trying to go multiplayer and nothing else. When I do the first start of singleplayer DCS for the day, it goes black for up to a minute, but then loads normal. I figure its probably shaders or something loading.

 

try to download from google drive link I updated post with.

 

the issue is w/ AMD Driver and rendering engine, if you main menu is using the default clouds 3D rendering, it will lock up before that point, if you chose an alternate theme without the 3D Clouds background, it will lock up when clicking into MP, Mission, Encyclopedia or Mission Editor etc

Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2),

ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9)

3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs

Link to comment
Share on other sites

I got to the main menu through the injection of the dlls posted by skatezilla. I couldn't even get there before !

So I guess it's a start.

Now it freezes in the loading screen whenever I try to launch any mission. :cry:

 

win 8.1, intel i7 4790K, Fury X and catalyst 15.9.1

 

log attached of a crash while loading sam killer mission

dcs.zip


Edited by lolwut845
added more details on the crash

i7 4790K, 1080ti, oculus quest+link, winwing f18 hotas, MFG crosswind

custom AB2 pit

Link to comment
Share on other sites

My joy was premature: finished downloading modules. Mission that starts on ground loads but then hangs on briefing screen(Su-25T, K-50). Mission starting in-flight (FC3 instatnt action) hangs at loading screen when bar is almost at 100%

Win 7x64 Ultimate

Gigabyte GA-990XA-UD3, FX-8320 3,5GHz, Noctua NH-U9B SE2 cooler, 4xKingston KHX1600C9D3/4GX, Sapphire Dual-X R9 285, Corsair ForceGT 120 SSD, OCZ-Vertex4 SSD, X-Fi Elite Pro, Tagan TG-600BZ PSU, Corsair Carbide 300R case

Saitek X52 FCS

Link to comment
Share on other sites

I've made some interesting findings, I can run the game with high or ultra settings everywhere BUT the shadows on "flat only" (every other setting in the shadows make the game crash while loading), right until takeoff. Then the game crashes as soon as I'm airborne.

i7 4790K, 1080ti, oculus quest+link, winwing f18 hotas, MFG crosswind

custom AB2 pit

Link to comment
Share on other sites

Yeah it looks like I'm experiencing the same situation as lolwut845 and asmod.

 

The .dll files let me get to the main menu, so I downloaded my FC3 module and changed the graphics settings. But when I launch a mission it loads to 100% then hangs there and DCS stops responding.

Link to comment
Share on other sites

Occasional freeze when loading mission

 

I am having problems with the game freezing when I launch a stock SP mission. I can select the mission and go into the mission planner, but when I press start it goes the loading screen and I do not even get a progression bar and the game is frozen there. I have tried the A-10C missions only thus far, but it seems to be an issue with access temp.lua within "C:\Users\xxxxx\AppData\Local\Temp\DCS.openbeta\" folder.

 

One of the workarounds that seem to allow me to get into the game, but may be flawed is to delete "tempMission.miz" and "temp.mis" files in "C:\Users\xxxxx\AppData\Local\Temp\DCS.openbeta\" folder before pressing start and that seems to get me into game.

 

Here are two log files renamed based on what was successful in loading and the other which froze and produced the error in question.

dcs_log_error.txt

dcs_log_success.txt


Edited by Raven68

Intel i5-9600K @ 3.7GHz

Gigabyte Z370XP SLI Mobo

G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin DDR4

GIGABYTE GeForce RTX 2070 8GB 256-Bit GDDR6(Assume the latest driver version)

Thermaltake Water 3.0 Certified Liquid Cooling System

Windows 10 Professional

Oculus Rift-S /TrackIR 5 in case VR dies

Thrustmaster HOTAS Warthog w/ Thrustmaster T-Flight Rudder Pedals

Link to comment
Share on other sites

I recently had clean reinstall of Win7(2 months ago), updated WIN7 all the way to latest patches.

I have all redistributable C++ files (except 2005)

DX11 version is installed.

Uninstalled 1.2.16 completely (an removed user files completely).

Installed 1.5 beta (on disk other then Win7, disk D in my case).

Also I have a few games on my PC and all of them start without a problem.

I see this thread drifted from "crash on game start" issue to the "crash in mission", but neverthless here is my issue:

Unfortunately 1.5 beta gives me black screen (no sound ), changes resolution if I alt+tab while in black screen, and that is about it.

First time I installed 1.5 using its installer (a few hours after it became available) - resulted in black screen right after start.

Then I downloaded all files from your website (used torrent) and installed it again - black screen.

I looked at his thread and downloaded those 4 files and put them where adviced - black screen.

No idea what to do next, throwing white towel.

My PC is 2500 i5, Asus Motherboard P67, AMD R9290 GPU, sound onboard.

Catalyst 15.7 (15.20.1046-150622a-186188C driver) is installed.


Edited by TRIAS

2500k i5 (4.3Ghz), r9 290, Win10, MSFFB2

Link to comment
Share on other sites

I updated to latest Catalyst - 15.7.1

DCS just updated itself to latest version.

Still no joy, but this time I see splash screen with DCS logo and 1.5 version. I wait, wait, wait

and nothing happens. If I go to task manager it shows there as DCS - not responding.

At my last effort when Itried to kill process through Task Manager it hung WIN 7 which many would agree is really hard to do.

You guys definitely pat yourself far calling it Beta at this point. I give up. Off my hard drive.

2500k i5 (4.3Ghz), r9 290, Win10, MSFFB2

Link to comment
Share on other sites

try to download from google drive link I updated post with.

 

the issue is w/ AMD Driver and rendering engine, if you main menu is using the default clouds 3D rendering, it will lock up before that point, if you chose an alternate theme without the 3D Clouds background, it will lock up when clicking into MP, Mission, Encyclopedia or Mission Editor etc

 

For me it takes a long pause, but then loads up. I'm also running the newest beta drivers CCC v15.10 make sure your card is on the list of cards before you download.

 

http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspx


Edited by raptorsim

Thanks,
Lt. Commander Jason "Punisher" M

Hardware:
i7 10700K 5 GHz Quad Core, Water-cooled , 32GBs 2400 DDR4 RAM, MSI Intel Z470A GAMING MB, MSI RTX 3080 GPU W/10GBs GDDR6X, 512GB NVME.2 SSD, 1TB NVME.2 SSD, 2TB External SSD, 2 512Gb SSD's & 1 350 Gb HARDDRIVE, WinWing Orion 2 Stick Base and Throttle Base, Quest 2, Windows 11 (64bit)

Link to comment
Share on other sites

I am having problems with the game freezing when I launch a stock SP mission. I can select the mission and go into the mission planner, but when I press start it goes the loading screen and I do not even get a progression bar and the game is frozen there. I have tried the A-10C missions only thus far, but it seems to be an issue with access temp.lua within "C:\Users\xxxxx\AppData\Local\Temp\DCS.openbeta\" folder.

 

One of the workarounds that seem to allow me to get into the game, but may be flawed is to delete "tempMission.miz" and "temp.mis" files in "C:\Users\xxxxx\AppData\Local\Temp\DCS.openbeta\" folder before pressing start and that seems to get me into game.

 

Here are two log files renamed based on what was successful in loading and the other which froze and produced the error in question.

 

UPDATE: It looks as if my freezing problem has disappeared as a result of upgrading to Windows 10. Not sure what in the OS made it go away unless there is something specific in the file handling. :dunno:

Intel i5-9600K @ 3.7GHz

Gigabyte Z370XP SLI Mobo

G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin DDR4

GIGABYTE GeForce RTX 2070 8GB 256-Bit GDDR6(Assume the latest driver version)

Thermaltake Water 3.0 Certified Liquid Cooling System

Windows 10 Professional

Oculus Rift-S /TrackIR 5 in case VR dies

Thrustmaster HOTAS Warthog w/ Thrustmaster T-Flight Rudder Pedals

Link to comment
Share on other sites

I have this problem (black screen upon launch, after logo screen). Menu music plays but it's just black.

 

It happened after the game restarted to apply graphics changes to the water (high->med) and shadows (high->med), and from one screen to camera+RMFD(auto placement). Those were the only settings I changed.

 

1.5.0.45655 (DCS.exe file properties)

 

Looking at the log file I think I found the problem:

 

=== Log opened UTC 2015-10-15 21:19:09
00000.000 INFO    VFS: Using 'Saved Games': "C:\Users\nearwood\Saved Games"
00000.001 INFO    DCS: DCS/1.5.0.45655 (x86_64; Windows/6.1.7601)
00000.001 INFO    DCS: CPU cores: 4, System RAM: 8163 MB
00000.004 INFO    EDCORE: (dDispatcher)enterToState_:0
00000.008 INFO    Dispatcher: 2015/10/15 17:19 V1508170900
00000.017 INFO    INPUT: Device created Keyboard
00000.039 INFO    INPUT: Device created Saitek Pro Flight X-55 Rhino Stick {1FE5DBF0-3DB9-11e5-8007-444553540000}
00000.039 INFO    INPUT: Joystick created[saitek Pro Flight X-55 Rhino Stick {1FE5DBF0-3DB9-11e5-8007-444553540000}], ForceFeedBack: no
00000.043 INFO    INPUT: Device created Saitek Pro Flight X-55 Rhino Throttle {19037810-3DB9-11e5-8005-444553540000}
00000.044 INFO    INPUT: Joystick created[saitek Pro Flight X-55 Rhino Throttle {19037810-3DB9-11e5-8005-444553540000}], ForceFeedBack: no
00000.144 INFO    SOUND: loaded 1051 sdefs from "sounds\sdef"
00000.187 INFO    SOUND: XAudio2: Using device ID:'{0.0.0.00000000}.{f073142b-0c73-4414-a2e5-9471f7a524de}' Name:'Headphones (High Definition Audio Device)', channels: 2
00000.187 INFO    SOUND: XAudio2: channel layout: Headphones/Stereo
00000.223 INFO    SOUND: Using SSE FTZ/DAZ mode.
00000.464 ERROR   VFS: Can't mount './CoreMods/WWII Units/Liveries' to '/textures//liveries/'.
00000.466 ERROR   VFS: Can't mount './CoreMods/aircraft/C-101/Textures/Avionics.zip' to '/textures/'.
00000.468 ERROR   VFS: Can't mount './CoreMods/aircraft/Hawk/Textures/Avionics' to '/textures/'.
00000.472 INFO    SOUND: loaded 10 sdefs from ".\coremods\aircraft\mig-21bis\sounds\sdef"
00000.509 INFO    DXRENDERER: Creating Resource "Unicode" of type 5
00000.511 INFO    DX11BACKEND: TRUNK renderer init: showShaderError coreCount=1
00000.517 INFO    DX11BACKEND: Driver Concurrent Creates - 1
00000.517 INFO    DX11BACKEND: Driver Command Lists - 0
00000.517 INFO    DX11BACKEND: DX11ShaderBinaries::loadShaders
00001.096 INFO    DX11BACKEND: DX11ShaderBinaries::loadShaders finished
00001.165 ERROR   VFS: Can't mount './Bazar/World/textures/L-39_C' to '/textures/'.
00001.200 INFO    RENDERER: Loading metashader cache from C:\Users\nearwood\Saved Games\DCS.openbeta\metashaders/
00001.200 INFO    RENDERER: Metashader cache: 0 (0) cached shaders out of date
00002.368 ERROR   DX11BACKEND: rendertarget "rtDynamicCloudMap" not found
00002.404 ERROR   Lua::Config: Lua error [string "BinocularCameraDialog = require('BinocularCameraDialog')"]:1: module 'BinocularCameraDialog' not found:
no field package.preload['BinocularCameraDialog']
no file '.\BinocularCameraDialog.lua'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\lua\BinocularCameraDialog.lua'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\lua\BinocularCameraDialog\init.lua'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\BinocularCameraDialog.lua'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\BinocularCameraDialog\init.lua'
no file './Scripts/BinocularCameraDialog.lua'
no file './Scripts/Common/BinocularCameraDialog.lua'
no file './Scripts/UI/BinocularCameraDialog.lua'
no file './Scripts/UI/F10View/BinocularCameraDialog.lua'
no file './dxgui/bind/BinocularCameraDialog.lua'
no file './dxgui/loader/BinocularCameraDialog.lua'
no file './dxgui/skins/skinME/BinocularCameraDialog.lua'
no file './dxgui/skins/common/BinocularCameraDialog.lua'
no file './MissionEditor/modules/BinocularCameraDialog.lua'
no file './Mods/tech/CombinedArms/UI/BinocularCameraDialog.lua'
no file '.\lua-BinocularCameraDialog.dll'
no file '.\BinocularCameraDialog.dll'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\lua-BinocularCameraDialog.dll'
no file 'C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\BinocularCameraDialog.dll' in "BinocularCameraDialog = require('BinocularCameraDialog')"
00002.405 INFO    DCS: srRes = 422860543, srGoodValue  = 422860543 skip
00002.423 ERROR   EDOBJECTS: Destruction shape not found AVIASHTAB_CRASH
00002.425 INFO    TERRAIN: lSystem::lSystem
00002.710 INFO    EDCORE: (dDispatcher)enterToState_:1
00002.834 ERROR   VFS: add_location {"My Missions", "C:\Users\nearwood\Saved Games\DCS.openbeta\Missions\"}: path already added as "My Missions"
00003.106 ERROR   VFS: Can't mount './CoreMods/WWII Units/Liveries' to '/textures//liveries/'.
00003.107 ERROR   VFS: add_location {"WWII Units", "./CoreMods/WWII Units/Missions/"}: path already added as "WWII Units"
00003.107 ERROR   VFS: Can't mount './CoreMods/aircraft/C-101/Textures/Avionics.zip' to '/textures/'.
00003.107 ERROR   VFS: Can't mount './CoreMods/aircraft/Hawk/Textures/Avionics' to '/textures/'.
00003.112 ERROR   VFS: add_location {"Su-25T", "./Mods/aircraft/Su-25T/Missions/en/"}: path already added as "Su-25T"
00003.112 ERROR   VFS: add_location {"TF-51D", "./Mods/aircraft/TF-51D/Missions/en/"}: path already added as "TF-51D"
00003.210 ERROR   DXGUI_EDGE_RENDER: Cannot load texture ''
00004.405 INFO    DXGUI: Cannot load font [C:\Program Files\Eagle Dynamics\DCS World OpenBeta\dxgui\skins\fonts\]!
00005.714 ERROR   DX11BACKEND: texture "dxgui/skins/skinme/images/setimage/button.png" not found
00005.928 INFO    EDCORE: (dDispatcher)enterToState_:2
00005.987 INFO    EDCORE: (dDispatcher)enterToState_:3
00047.075 INFO    EDCORE: (dDispatcher)enterToState_:6
00047.080 INFO    SOUND: detaching sdef path ".\mods\aircraft\tf-51d\sounds\sdef\"
00047.080 INFO    SOUND: detaching sdef path ".\coremods\aircraft\mig-21bis\sounds\sdef\"
00047.080 INFO    SOUND: detaching sdef path "sounds\sdef\"
00047.084 INFO    TERRAIN: lSystem::Exit()
00047.084 INFO    TERRAIN: lSystem::CleanScenes()
=== Log closed.


Edited by BLOZUP
Link to comment
Share on other sites

My computer never gets past the "DCS" splash screen. It simply fades to white, and I get the "DCS is not responding" error message. Then it closes. I've uninstalled & reinstalled - nothing. I downloaded the 4 dlls on the first page - nothing. I've done the update using the command prompt - nothing...still white screen and not responding. Version 1.2 works just fine. 1.5 was working well until hotfix 2 came out, but now it won't launch at all. I have an AMD A-10 3.8 gig processor, nvidia 7900 graphics card and 8G RAM. If anyone has a clue, I'm open to suggestions, otherwise, I'm going to sit out on the sidelines until another update comes along.

Link to comment
Share on other sites

I have 1.5 installed on two W10 machines. On one machine it load fine. The second machine has the black screen after load up.

dcs.txt


Edited by jcbak

[sIGPIC][/sIGPIC]WIN 10, i7 10700, 32GB DDR4, RTX 2080 Super, Crucial 1TB SSD, Samsung EVO 850 500GB SSD, TM Warthog with 10cm extension, TIR5, MFG Crosswind Pedals, Wheelstand Pro, LG 40" 4K TV, Razer Black Widow Ultimate KB[/size]

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...