DerekSpeare Posted November 7, 2015 Share Posted November 7, 2015 (edited) Edit: Solved. The latest update wants to use the 0800 runtimes with the necessary nvidia drivers. It's running fine and still nice and smooth for me. Edited November 8, 2015 by DerekSpeare Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
DerekSpeare Posted November 7, 2015 Author Share Posted November 7, 2015 (edited) ... Edited November 8, 2015 by DerekSpeare Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
DerekSpeare Posted November 7, 2015 Author Share Posted November 7, 2015 (edited) ... Edited November 8, 2015 by DerekSpeare Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
morkster666 Posted November 7, 2015 Share Posted November 7, 2015 oculus 0.0.8 plus needed nvidia drivers do work but killed performance again... soo disappointed Link to comment Share on other sites More sharing options...
hansangb Posted November 8, 2015 Share Posted November 8, 2015 Uh oh. Going to have to stay away from the update then. Been enjoying the hell out of 75fps smoothness! hsb hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
DerekSpeare Posted November 8, 2015 Author Share Posted November 8, 2015 (edited) ... Edited November 8, 2015 by DerekSpeare Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
DerekSpeare Posted November 8, 2015 Author Share Posted November 8, 2015 (edited) ... Edited November 8, 2015 by DerekSpeare Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
hansangb Posted November 9, 2015 Share Posted November 9, 2015 oculus 0.0.8 plus needed nvidia drivers do work but killed performance again... soo disappointed So just to be sure. Even with 0.8 Oculus driver and the latest Nvidia (released a few days ago), performance is pretty bad? Thanks hsb hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
misty007 Posted November 9, 2015 Share Posted November 9, 2015 is it possible to undo the last update?cause it killed the oculus for me as well. Link to comment Share on other sites More sharing options...
Techy111 Posted November 9, 2015 Share Posted November 9, 2015 Got it working with my Rift, only works with 0.8 Runtime and FPS pretty steady on latest 358.87 driver. Tony Link to comment Share on other sites More sharing options...
DerekSpeare Posted November 9, 2015 Author Share Posted November 9, 2015 I think it would be helpful to have release/update notes available when the updates are deployed. While I appreciate the update and the hopeful improvements they bring, it's a disservice to the user base not to include release/update/patch notes with the update. Knowing that the Oculus 0.8.0.0 runtimes were required could have save hours of lost time. IF there are release/patch notes somewhere, someone kindly direct me to them. Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE Link to comment Share on other sites More sharing options...
vicx Posted November 9, 2015 Share Posted November 9, 2015 :rolleyes: Link to comment Share on other sites More sharing options...
morkster666 Posted November 9, 2015 Share Posted November 9, 2015 So just to be sure. Even with 0.8 Oculus driver and the latest Nvidia (released a few days ago), performance is pretty bad? Thanks hsb No, but 75 fps dropping to 68 fps every second or so.. Got rid of this annoying stutter using 0.0.8 and latest driver just prior to this update Link to comment Share on other sites More sharing options...
hansangb Posted November 9, 2015 Share Posted November 9, 2015 (edited) DerekSpeare, In the main "DCS Update" thread, there are some notes about major changes" however, requirement for 0.8 was not there (I don't believe). And it is an openbeta after all. We all opted in to be test/guinea pigs, so I think it's important to have an open mind about what information may or may not be in the release notes. Here's the link: http://forums.eagle.ru/showthread.php?p=2546251#post2546251 morkster666, Thank you. I skipped the latest DCS update, but I guess it's safe. hsb Edited November 9, 2015 by hansangb added the link to the thread hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
hellking Posted November 24, 2015 Share Posted November 24, 2015 Anybody else observing major differences in Oculus performance with different openbeta version? 1.5.1.46722.87 was the best in terms of performance and stability. 1.5.1.46722.99 was completely broken, not able to launch missions 1.5.1.46722.10? was stable, but frame rate dropped by ~25%, making most planes stutter at medium graphic settings with a high end graphics card My GPU utilization is at 30% or so, and my system is limited by CPU. I think it is because of the DK2 graphical projections that are taking place. They need to find a good solution to this (move DK2 projections to GPU, or efficient multi-threaded CPU) especially since CV1 is coming. Link to comment Share on other sites More sharing options...
Deathbane Posted November 25, 2015 Share Posted November 25, 2015 (edited) Anybody else observing major differences in Oculus performance with different openbeta version? 1.5.1.46722.87 was the best in terms of performance and stability. 1.5.1.46722.99 was completely broken, not able to launch missions 1.5.1.46722.10? was stable, but frame rate dropped by ~25%, making most planes stutter at medium graphic settings with a high end graphics card My GPU utilization is at 30% or so, and my system is limited by CPU. I think it is because of the DK2 graphical projections that are taking place. They need to find a good solution to this (move DK2 projections to GPU, or efficient multi-threaded CPU) especially since CV1 is coming. This patch is actually being really smooth for me EXCEPT for random instances where suddenly the game decides to have a bit of stutter for no reason. Seems related to this patch only, but its not usually severe enough to cause real issues. Playing on all settings maxxed apart from shadows and AA. shadows on low, AA on 2x, and getting consistent framerates with no judder. Card is a radeon 290x SAPPHIRE with 8 gigs of VRAM. Wondering if there is still some VRAM memory leak problem, going to see what its like with a few more patches and in 2.0 Experience in the KA 50 is pretty good, same with the MIG-21. Know this is a little offtopic but: is there anyway to zoom in the oculus in dcs? I can read the dials etc fine, but learning the mig and reading its TINY lamp indicators is giving me issues. Have to basically put my head under my desk to see them and tracking doesnt like that!!! :music_whistling: Edited November 25, 2015 by Deathbane V.O.D.K.A. Squadron: Northern Wolves - Red ones go faster! Link to comment Share on other sites More sharing options...
Recommended Posts