跳转到帖子

已推荐帖子

发布于
Yes, i read it. And this would be the third time i sent an email to that address and i get no answer.

 

OK, sorry. Out of curiosity how long ago did you send your first one?

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

  • 回复 152
  • 已创建
  • 最后回复

此主题的热门发布者

发布于
Please remove this copy protection

 

I'd doubt that's up to LNS. ED uses it for all of DCSW.

Reformers hate him! This one weird trick found by a bush pilot will make gunfighter obsessed old farts angry at your multi-role carrier deck line up!

发布于

I have a new activation problem. The prompt appears to reactivate the module, but it gives and error report and states that I can only run one instance of the activation software...but there is only one instance running.

 

I've tried uninstalling and reinstalling the module, plus restarted the software several times.

 

Anything else I can do, this started after I reverted back to 1.5.0 to avoid all of these bugs. For me, 1.5.0 is running very well with the MiG-21 and there is little incentive to upgrade.

 

-Nick

发布于

I had a similar issue. In Win 10 if you don't see the DCS program in the Task Manager at the top under 'Apps', look down through the 'Background Processes' for it. If found end Task on it.

 

I could not re-activate the Mig21. It locked up DCS and the game would not load anymore. So, I ran the protect program for it, and then first Deactivate it. Then activate it again.

 

DCS World OpenBeta\Mods\aircraft\MIG-21bis\bin\pcnsl.exe

🍺 Snack Officer  🥨 
Intel I9-10850K (OC @ 5.0ghz) │ 64GB (4x16GB) DDR4 3200 │Gigabyte RTX 4090 Gaming OC 24gb
- ҉ - Blackshark Cockpit Trainer - ҉ -    Thread   | Download

发布于 (已编辑)
I only have that one from you (no two others) and it was missed in Oct.

Responded.

 

I sent you two e-mails in October and I didn't send you the third one because the module worked by applying the registry fix. No problem I suppose you have lots of emails.

 

But today, everytime I open 1.5 and later 1.2.16, I get the Starforce window and I have to reactivate. If later I open 1.5, I get the Starforce window again, I reactivate but the window is freeze. I have to kill the DCS task and registry is full of entries like those ones. Yesterday I had 7 activations and now I have 3 or 4, I don't remember:

 

2nai3ah.png

本帖最后于,由splash编辑
发布于

That's good customer support Cobra! I hope you guys can fix this quick though! Even if its just for your workload's sake :D

[sIGPIC][/sIGPIC]

 

 

 

-- i7 4790K

-- Club 3D R9 290X Royal Ace SOC

-- Asus Maximus VII Ranger

-- G.Skill Trident X 16GB DDR3-2400 CL10

-- Gelid Tranquillo rev.2

-- Corsair RM850

-- Corsair 760T White

-- Windows 10

 

发布于 (已编辑)
I had a similar issue. In Win 10 if you don't see the DCS program in the Task Manager at the top under 'Apps', look down through the 'Background Processes' for it. If found end Task on it.

 

I could not re-activate the Mig21. It locked up DCS and the game would not load anymore. So, I ran the protect program for it, and then first Deactivate it. Then activate it again.

 

DCS World OpenBeta\Mods\aircraft\MIG-21bis\bin\pcnsl.exe

 

Tried that, couldn't find it active anywhere in the processes. I figure it had to do with the fact that I reactivated the MiG-21 for DCS 1.5.1 and it wouldn't let me go back to 1.5.0.

 

I decided to go back to 1.5.1 and the MiG-21 works fine. :)

 

It is a bit more stuttery around airfields (which LNS knows about), but otherwise working fine.

 

I decided that DCS with MiG-21 is better than DCS without funky trees. ;) I figure that all of this will be fixed relatively soon, I'll spend a bit more time flying over water.

 

-Nick

本帖最后于,由BlackLion213编辑
发布于 (已编辑)

I'm already sick of this thing, I only have it installed at my desktop and laptop, but only 4 activations left...:dunno:

本帖最后于,由mrmach编辑

" MrMACH...Flies a cargo plane full of rubber dogshit out of Hong kong..." :D

[sIGPIC][/sIGPIC]

发布于

Mig-21 reactivations

 

After the latest open beta update, Mig-21 said my system changed significantly and asked to reactivate. I am now down to 7, although never changed anything since I bought Mig-21. Not even Windows updates... With this speed I will soon have to buy it again.

12900KF@5.4, 32GB DDR4@4000cl14g1, 4090, M.2, W10 Pro, Warthog HOTAS, ButtKicker, Reverb G2/OpenXR

发布于

Meh, Im also down to 7 activations after the latest patch making me lose 2

Im not worried however, if it happens again though and I get lower than say 5 I will email asking for it to be rectified.

And lo, Reverend Vegas did say "Take forth unto the infidel the mighty GAU 8 and expend its holy 30MM so that freedom will be brung upon them who knoweth not the joys of BBBBBBBRRRRRRRRRRRRRRRRRRRRTTTTTTTTTT"

 

"Amen"

发布于 (已编辑)

I've uninstalled the MiG-21 Bis from my beta installation for the moment while this is being looked into. I'll just fly some other aircraft in the meanwhile, it is beta after all.. While an inconvenience, it should hopefully at least mean no wasted activation and no need to add to the workload by requesting a new set once the bug is fixed?

本帖最后于,由DragonShadow编辑
发布于

Well, Cobra said that we will probably lose another activation in the next patch as well.

 

I only have 4 left, but may as well wait to send the email until I have 1 left or this is fixed. They have promised to make this right either way..

🍺 Snack Officer  🥨 
Intel I9-10850K (OC @ 5.0ghz) │ 64GB (4x16GB) DDR4 3200 │Gigabyte RTX 4090 Gaming OC 24gb
- ҉ - Blackshark Cockpit Trainer - ҉ -    Thread   | Download

发布于

Activation consumption

 

After installing the latest patch, when I started DCS World it decided that I'd significantly changed the setup of my PC and required a re-activation but only for the MiG-21 module. Other than having installed the latest patch I'd changed nothing.

 

This doesn't necessarily concern me as I still have 8 activations remaining, but it could become an issue as further patches are published.

 

Is there an official ED policy with regards to beta patches using activations?

 

Edited to add: Ah, this has been reported elsewhere, my bad, please ignore.

System Spec: Cooler Master Cosmos C700P Black Edition case. | AMD 5950X CPU | MSI RTX-3090 GPU | 32GB HyperX Predator PC4000 RAM | | TM Warthog stick & throttle | TrackIR 5 | Samsung 980 Pro NVMe 4 SSD 1TB (boot) | Samsung 870 QVO SSD 4TB (games) | Windows 10 Pro 64-bit.

 

Personal wish list: DCS: Su-27SM & DCS: Avro Vulcan.

发布于 (已编辑)
Hmm.. I didn't know that you were allowed to install a license on more than one computer?

Now you know :D

 

By the way I finaly managed to install it, the way; first use the reg tool and after, delete local machine software leatherneck simulations folder (I recommend to export the key as backup) with REGEDIT.exe ...and when it asks to ,insert the serial again...

(done it twice, one for beta and after for current versión 1.2.16 that mean 2 activations left...I think time to send this e-mail to Cobra)

本帖最后于,由mrmach编辑

" MrMACH...Flies a cargo plane full of rubber dogshit out of Hong kong..." :D

[sIGPIC][/sIGPIC]

发布于
After the latest open beta update, Mig-21 said my system changed significantly and asked to reactivate. I am now down to 7, although never changed anything since I bought Mig-21. Not even Windows updates... With this speed I will soon have to buy it again.

 

I just had it do the exact same thing to me, after I just updated to the newest version of 'OpenBeta'. Why would we get hit with a activation after an update?

发布于
Hmm.. I didn't know that you were allowed to install a license on more than one computer?

 

You can, though I would imagine you will eat a lot of activations during some updates.

 

The reason being, my supposition here, that when you install it on Computer B, it now sees your key tied to a new hardware configuration from Computer A so you use an activation. Now, when you go to update Computer A, it sees an new hardware configuration (compared to when the last activation was performed, so you use another activation. Attempt to update Computer B and the same scenario ensues. Rinse. Repeat.

 

I am fairly certain that Starforce doesn't keep track of previous hardware configurations beyond the most recent activation platform.

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

  • 最近浏览   0位会员

    • 没有会员查看此页面。
×
×
  • 创建新的...