Undersized 490l fuel tank

[GumidekCZ]

EDITED:CORRECTED LENGTH UNITS :)

Hi, I noticed wrong size of 490 l fuel tank.

Not just tiny size error, more than 1000 mm! which is allot.

se the real size in picture below and compare it to the size from Leatherneck.

Correct size of tank is 5300 mm length and 450 mm max diameter.

Real:

Now the actual size from Leatherneck:

 

With dimension, also hindge is missaligned. In DCS is more forward position. The texture of pylon in DCS is indicating where it should be.

本帖最后于2016年4月27日，由GumidekCZ编辑

[GumidekCZ]

some few more pictures with non symetric shape of aft tank section wtih some detail:

[flanker1]

good eye!

[Wizard_03]

Necro bump I know but this issue has really bugged me since it was pointed out. Any updates?

[GumidekCZ]

NO updates yet :( still waiting to be fixed. Since I reported this, I have managed to born my son and build my own my house, may be I have wait till my second child is borned.

[NaCH]

Incredible and detailed investigation!

 

 

Hopes there is someone on the other side with some answers. Even if they are negative saying it will never be fixed...

[GumidekCZ]

https://leatherneck-sim.mantishub.io/view.php?id=299

Bug confirmed, but nothing else since reported...

Rudel should really do somthing about it ... at the end, it is only couple of hours of 3D modeling and some textures. So come on Rudel, sit at your PC, make yourself one strong coffe and problem is almost fixed :megalol:

[Freeroamer]

LN please fix.

[flanker1]

i am with you.

[SVKSniper]

I make for you GumidekCZ;)

[Martin2487]

It has been reported for a long time. It would be nice if the developers gave us feedback if a repair is preparing to update in the near future.

 

Developers please respond :-)

 

Great work SVKSniper :-)

[Bogey Jammer]

3D model overhaul has been officially announced. Just hope that specific part of it will be fixed too.

[GumidekCZ]

I make for you GumidekCZ;)

 

Thank very much Sniper,

Your 490L fuel tank is good start, but I had to rework all textures (base, roughmet, normal map) with better accuracy and details. But the result is almost what I wanted. Only thing is the resolution of textures. It is still not enought for crisp detailed textures with stencils. Please, fi you can help with this, I would love it!

 

Here is my "Pre-realease" version of "CZAF 9801" with bigger, reworked fuel tank:

本帖最后于2018年5月14日，由GumidekCZ编辑

[flanker1]

looking very nice! what exactly have you reworked and what do you want to improve?

[GumidekCZ]

looking very nice! what exactly have you reworked and what do you want to improve?

https://www.digitalcombatsimulator.com/en/files/3205514/?sphrase_id=11261055

SVKSniper made this for us, on my call for help. So I started with the files I downloaded here.

So I tried to improve following:

weld lines missing or wrong place,

fuel filler cap missing and another two circular caps,

3 black holes at the bottom

Normal map should represent weld as convex, not concave,

tail of tank should be offset from its axis little bit upwards, but Im not used to work in 3D, so it is still not accurate = axisymmetric.

[Dr_Arrow]

GumidekCZ and SVKSniper - great work with the tank, however this model also has to be (and can be) used for the central 490l tank. Thanks once more.

[GumidekCZ]

GumidekCZ and SVKSniper - great work with the tank, however this model also has to be (and can be) used for the central 490l tank. Thanks once more.

+1

Very good point

[flanker1]

https://www.digitalcombatsimulator.com/en/files/3205514/?sphrase_id=11261055

SVKSniper made this for us, on my call for help. So I started with the files I downloaded here.

So I tried to improve following:

weld lines missing or wrong place,

fuel filler cap missing and another two circular caps,

3 black holes at the bottom

Normal map should represent weld as convex, not concave,

tail of tank should be offset from its axis little bit upwards, but Im not used to work in 3D, so it is still not accurate = axisymmetric.

 

ok, now it is more clear. however, very great work. what about the repaints/skins? is also a silver one available? i would be happy to download and use it!

[GumidekCZ]

ok, now it is more clear. however, very great work. what about the repaints/skins? is also a silver one available? i would be happy to download and use it!

Of course, Priority for me was the textures for my two skins, but Metal/Silver is one, which is "MUST HAVE, must be done" version, together with ability to load it as a center tank. Than I can that also provide PSD template for download.

[cro_mig_21]

GumidekCZ and SVKSniper - great work with the tank, however this model also has to be (and can be) used for the central 490l tank. Thanks once more.

I use it as a central tank...just make a copy and rename it in PTB-490c-MIG21.edm (c for central) and put them in the respectable folder: C:\Games\DCS World OpenBeta\CoreMods\aircraft\MiG-21BIS\Shapes

[DonJosh]

I use it as a central tank...just make a copy and rename it in PTB-490c-MIG21.edm (c for central) and put them in the respectable folder: C:\Games\DCS World OpenBeta\CoreMods\aircraft\MiG-21BIS\Shapes

 

cro, can you please send me the your fueltanktexture, because my tank have now green pixels, after i tried your way . thank you

[cro_mig_21]

cro, can you please send me the your fueltanktexture, because my tank have now green pixels, after i tried your way . thank you

Hey Josh, sent you a PM

[Schmidtfire]

Great job! How about you guys send your work to Rudel so he can officially put it into the Mig21bis module? We need something permanent that does not break integrity check.

[-Rudel-]

Would save me time :D

[GumidekCZ]

Would save me time :D

I have managed to contact SVKSniper yesterday and agreed on some following steps to improve 3D model and texture resolution. When we both are happy, we can send the result to you -Rudel-, than its up to you :)

本帖最后于2018年5月15日，由GumidekCZ编辑