Jump to content

Still Sound Files in 2.0.2.52658 not working also posted on 2.0 OpenAlpha Bugs


Recommended Posts

Posted

Yesterday I made a thread on the 2.0 Open Alpha Bugs and Problems, however so far no one reacted. Because I fly the Mirage a lot, I noticed the problem. Maybe it only affects me, but I doubt that. So I post this thread for the Mirage flyers in DCS. I hope more guys noticed this problem and hopefully Zeus and/or Cptsmiley.

 

My thread from yesterday on 2.0 Open Alpha Bugs and Problems:

 

 

I reported this issue on the 17th of April ( http://forums.eagle.ru/showthread.php?t=165031 ) with the previous two updates (the wrong one the corrected one). The aircraft which use default sound files such the Mirage, Hawk, partly the Mig 21 and some more are affected by this problem.

 

The outside sound files are working correct. These are the Su25 (Front, back and around sound files which you can find in: Sounds/Effects/Aicrafts/Engines.

 

For inside cockpit sounds these aircraft use sound files from the Su27: Su27InHeAmbL.wav and the Su27InHeAmbR.wav. These "default" sound user aircraft use also files from Sounds/Effects/Aicrafts/ such as PlaneFurWindIn.wav. PlaneFurWind.wav. PlaneChute.wav, PlaneChuterumble.wav etc.....

 

After a long search which files are not working I reported on the 17th that the PlaneFurWindIn.wav file did not work in the cockpit. What you hear after the last updates are the sounds from the outside. (also with update 2.0.2.52658 is was not corrected). Soft sounds and when flying above Mach 1 there is silence in the cockpit. These following files for sure are not working PlaneFurWindIn.wav. PlaneFurWind.wav. PlaneChute.wav, PlaneChuterumble.wav. But maybe more files are effected. It is rather complex the find out which ones do not work. But these ones are not working in 2.0.2.52658 for sure.

 

All is still working correct in 1.5.3 So the problem is only exists only in 2.0.2.

 

It tested it by temporarily removing back and fourth the wav files one by one and fly the aircraft with and without these affected files. So i discovered that these files don't work with or without in the respective dir maps.

 

I hope that ED is picking this up with the next update. Perhaps more people discovered this.

 

Tornado

Posted

No sound in external views of the MIG 21 here too,

as I have reported:

 

http://forums.eagle.ru/showthread.php?t=165823

 

Also the Mirage 2000 Sound is less good inside cockpit,

much less srtong wind @ + 300 Knots. 1.5.3 is OK.

Mainboard: ASUS Maximus X Hero Intel Z 370
CPU: Intel 12-Core i7-8086K @ 4.0 GHz    Memory: 32GB Corsair DDR4-3000 MHz
Graphics Card: ASUS NVIDIA GeForce RTX 4090 24 GB
Monitor ASUS - Oled PG42UQ 41.5" @ 4K    1 SSD Samsung 860 PRO 256 GB    1 SSD Samsung 990 PRO NVMe M.2 4 TB
Windows 11 Home - 64    CH Products Combatstick, Throttle and Pedals

Posted

Thanks for the responses so far. If you want to test if the sound files are working correct the best way is to rename the wav files in the following Map:

DCS World 2 OpenAlpha/Sounds/Effects/Aicrafts/

rename or remove (with backup of course) the following wav files:

PlaneFurWindIn.wav. PlaneFurWind.wav. PlaneChute.wav, PlaneChuterumble.wav

In this way DCS will not find the wav files when you start up.

With this action in my case there is no difference for the incockpit sounds if I remove or rename these wav files or having them activated as it shoot be. They have not any function in 2.0.2. However in 1.5.3. all is working as it should. The incockpit sound especially the PlaneFurWindIn.wav makes a huge difference in the incockpit sound when it is working as it should (as in 1.5.3.).

I also use some wav files of my own (only a few) and enhance them here and there. (adjust them with the corresponding sound definition files .sdef also be be found in the sound map). But I always do the test first with the default issued DCS files. (after the update always set back or after a repair action)

 

When you use the dragchute in 2.0.2. for the Mirage you will not hear the chute opening and rumbleing because these files are not working: PlaneChute.wav, PlaneChuterumble.wav. Test it on the way I discribed it.

I would like to hear if you notice this problem now.

 

Thanks guys an hope to hear from you.

Posted
No sound in external views of the MIG 21 here too,

as I have reported:

 

http://forums.eagle.ru/showthread.php?t=165823

 

Also the Mirage 2000 Sound is less good inside cockpit,

much less srtong wind @ + 300 Knots. 1.5.3 is OK.

 

Indeed same problem with the Mig. No sound outside. There must be something wrong the whole sound system of 2.0.2. Especially third party aircraft are affected.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...