Captain Orso Posted May 13, 2022 Share Posted May 13, 2022 So, basically SRS doesn't support the AH-64, except in that there is a work-around. I thought I was going a bit more nuts, but I guess I'm still at the normal level When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
HappyVoo Posted May 15, 2022 Share Posted May 15, 2022 Hi, first of all thanks for your contribution. but i have a question After connecting to the server, my microphone is not smooth, how can I fix it? Here is my test video:https://www.bilibili.com/video/bv1aB4y1y7oj Link to comment Share on other sites More sharing options...
LazyBoot Posted May 17, 2022 Share Posted May 17, 2022 (edited) On 5/13/2022 at 1:47 AM, Captain Orso said: In the AH-64D Apache, when I select the radio I wish to used for transmission with the RTS (Radio Transmission Select) rocker on the EUFD (Enhanced Up-Front Display), SRS doesn't change to that radio. When I press the SRS PTT button, I see in the SRS overlay, the asterisk next to the top most radio. I can not change away from it. Do I need to configure something in SRS to get it to work? You might indeed need to check your SRS settings, it's working fine on my end. I don't quite recall what combination of allow in-cockpit and whatnot settings you need for it though. Edited May 17, 2022 by LazyBoot Link to comment Share on other sites More sharing options...
Captain Orso Posted May 17, 2022 Share Posted May 17, 2022 So far, no help. Can anyone tell me HOW to make it work? Until now, everything worked out-of-the-box. Also, for Ciribob a request/suggestion. On the Controls page, make asserting a button/switch highlight the set control on the page. I can't remember exactly which number is which button, so this would make everything so much easier. When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
Ciribob Posted May 18, 2022 Author Share Posted May 18, 2022 For support, please go to the SRS Discord https://discord.gg/AjzxqxjSent from my HD1903 using Tapatalk 1 Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
Captain Orso Posted May 18, 2022 Share Posted May 18, 2022 Okay, thanks! When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
Captain Orso Posted May 20, 2022 Share Posted May 20, 2022 On 5/13/2022 at 10:52 AM, Captain Orso said: So, basically SRS doesn't support the AH-64, except in that there is a work-around. I thought I was going a bit more nuts, but I guess I'm still at the normal level Management Summery Do NOT set "ALWAYS allow SRS Hotkeys" in Settings -> Profile Settings -> Controls /Cockpit Integration. It does not matter whether there is a conflict in the setting or not, if this is set, changing the radio in-cockpit will have no effect on SRS. Thanks to Ciribob and other for their patience and help... especially their patience *whew* who wants a beer? When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
Varry007 Posted August 29, 2022 Share Posted August 29, 2022 (edited) I'm having a strange issue. Whenever i enter a server, i'm spectator (before hopping into an aircraft); while in spectator, SRS seems to hot mic. As soon as I'm in my aircraft; no more hot mice;and PTT works correctly. Oddly; whenver I'm KIA, the hot mic starts again, until I'm respawned. This rogue transmission in hot mic; happens on the guard channel. Edited August 30, 2022 by Varry007 Link to comment Share on other sites More sharing options...
GUMAR Posted October 30, 2022 Share Posted October 30, 2022 Does anyone know how retransmission works with lotatc? And what objects can retransmit? [sIGPIC][/sIGPIC] Реальные хотелки к ЛО3 по Су-25 в основном... ASRock PG9, i-5 9600KF, MSI 2080Ti, 32GB 3466 Link to comment Share on other sites More sharing options...
Ciribob Posted November 1, 2022 Author Share Posted November 1, 2022 Does anyone know how retransmission works with lotatc? And what objects can retransmit?Retransmission works on the client, so SRS will retransmit from where ever your location is.You can set your location in LotATCIt's simulates you receiving it, then sending it out again Sent from my Pixel 7 Pro using Tapatalk Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
GUMAR Posted November 1, 2022 Share Posted November 1, 2022 7 hours ago, Ciribob said: Retransmission works on the client, so SRS will retransmit from where ever your location is. You can set your location in LotATC It's simulates you receiving it, then sending it out again Sent from my Pixel 7 Pro using Tapatalk Thats not exactly what Im asking. If I'm a GCI, what objects are avaliable for retransmission? For example, I set my location as an AWACS. I want a helicopter, located on the far side of the mountain ridge to receive my message. And there is an An-26 over him. Will he receive it? Or retransmission works only with objects that can be set as my location?(airdromes, radars) [sIGPIC][/sIGPIC] Реальные хотелки к ЛО3 по Су-25 в основном... ASRock PG9, i-5 9600KF, MSI 2080Ti, 32GB 3466 Link to comment Share on other sites More sharing options...
Recluse Posted November 20, 2022 Share Posted November 20, 2022 (edited) Posted on the Discord, but maybe somebody will know here. Simple (I hope) question: Is there a way to prevent SRS starting up automatically? Since I don't use it for SP or some private MP sessions, I would like to either prevent it from starting up with Windows and/or DCS and just start it manually when needed. Also seeing a lot of DCS crashes lately. Not sure it is SRS related, but would like to be able to toggle it on and off for testing purposes. What I mean is that after a boot, SRS seems to be already running as it loads up when I start DCS. I can't really see a way to turn it OFF (other than killing it in Task Manager). I would like to have to start it manually to have the option of not having it running. EdIT: Seems like just seeing the overly before it is connected does not mean it is running. I think I can just disconnect Auto-Connect and hide the overlay to prevent SRS running. EDIT: Ciribob answered on Discord: "Turn off SRS AutoLaunch in DCS SRS Settings" Lately been having a ton of crashes that SEEM to be correlated with starting to use SRS, but I am not 100% sure that is the issue. Seems to happen in VR only. I will be flying along and then all of a sudden, VR will crash (Freeze in the headset with lots of tearing). DCS also appears frozen and I need to kill in in Task Manager. Seems like more of a VR (QUEST2) issue as I don't seem to find a DCS CRASH LOG or .dmp file and the Log file doesn't seem to show anything catastophic. Just tried connection without VR and it seemed perfectly stable. Probably not an SRS issue, but I thought I would ask if anyone else had seen any weirdness with VR. When I am connected, SRS works perfectly. Edited November 21, 2022 by Recluse Link to comment Share on other sites More sharing options...
312_JS Posted February 8, 2023 Share Posted February 8, 2023 Hello. Any of you using SRS together with DCS-ExportScripts (Stream Deck), please? Enabling DCS-ExportScripts in export.lua makes my SRS to be unable to connect to the Game. Thanks a lot in advance! Link to comment Share on other sites More sharing options...
Trigati Posted February 8, 2023 Share Posted February 8, 2023 Try swapping the order they appear in Exports.luaDon’t know if it will work but had issues with SRS and Tacview before and that solved it.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
312_JS Posted February 8, 2023 Share Posted February 8, 2023 55 minutes ago, Trigati said: Try swapping the order they appear in Exports.lua Don’t know if it will work but had issues with SRS and Tacview before and that solved it. Sent from my iPhone using Tapatalk Sadly no, the DCS-ExportScripts doesn't work unless it's the first and even if the SRS is first, it doesn't connect. Link to comment Share on other sites More sharing options...
312_JS Posted February 9, 2023 Share Posted February 9, 2023 Looks like the issue was the ";" at the end of the pcall function. Without it it works flawless. So my Export.lua now is: dofile(lfs.writedir()..[[Scripts\DCS-ExportScript\ExportScript.lua]]) pcall(function() local dcsSr=require('lfs');dofile(dcsSr.writedir()..[[Mods\Services\DCS-SRS\Scripts\DCS-SimpleRadioStandalone.lua]]); end,nil) Link to comment Share on other sites More sharing options...
Willdass Posted February 25, 2023 Share Posted February 25, 2023 Hi, This may already have been answered, but could not find it in my searches but: Just started experimenting with my own dedicated server with SRS and I have got the DCS server and SRS server working, but I'm not able to get the auto connect feature to work. I have copied the "DCS-SRS-AutoConnectGameGUI.lua" into my Saved Games\DCS\Scripts\Hooks and verified that my public Ipv4 address is entered. But still, when I or my friends connect to my DCS Server we won't auto connect to the SRS server, we have to manually enter the IP in SRS and connect. nullAny suggestions? https://www.youtube.com/@Willdass Setup: VPC Warbrd with TM F/A-18 stick on 10cm extension, Realsimulator FSSB-R3 MK II Ultra with F16SGRH grip, Winwing Super Taurus throttle, SimGears F-16 ICP, Winwing Combat and Take Off Panels, TM TPR Pendular Rudders, 3x TM Cougar MFD's, Simshaker Jetpad, Wacom Intuos S for OpenKneeboard. PC: RTX 4090, Ryzen 7 5800X3D, 64gb RAM 3600mhz, Varjo Aero, HP Reverb G2, Meta Quest Pro Link to comment Share on other sites More sharing options...
Padinn Posted March 13, 2023 Share Posted March 13, 2023 On 2/25/2023 at 12:02 PM, Willdass said: Hi, This may already have been answered, but could not find it in my searches but: Just started experimenting with my own dedicated server with SRS and I have got the DCS server and SRS server working, but I'm not able to get the auto connect feature to work. I have copied the "DCS-SRS-AutoConnectGameGUI.lua" into my Saved Games\DCS\Scripts\Hooks and verified that my public Ipv4 address is entered. But still, when I or my friends connect to my DCS Server we won't auto connect to the SRS server, we have to manually enter the IP in SRS and connect. nullAny suggestions? I have found that, for whatever reason, my file needs to be in the installation scripts/hooks folder to work...I actually just came here to figure out why. Anyone else have issues with autoconnect? Link to comment Share on other sites More sharing options...
motoadve Posted March 25, 2023 Share Posted March 25, 2023 Is there a way to have auto connect, without having DCS out of focus? then have to remove VR headset, click ok, put back VR headset. I start SRS before DCS, and connects, but then when in game and when starting the multiplayer session I get a new menu , and that gets DCS out of focus. Auto Connect prompt should be ON or OFF? Link to comment Share on other sites More sharing options...
Rikk Posted May 4, 2023 Share Posted May 4, 2023 I've had a good look around but can't find the info I need. I want to setup the spectator radio's, I have the below done but nothing being picked up by SRS, ie if I go into spectator mode no radio appear with set freq's. I assume the syntax is wrong but how? Thanks null Link to comment Share on other sites More sharing options...
Dannyvandelft Posted May 21, 2023 Share Posted May 21, 2023 Need help from the gurus. I installed a Buttkicker gaming PRO yesterday and when I start it, SRS disconnects from the game. Stays connected to server and voip though. Sent from my SM-G960U using Tapatalk Link to comment Share on other sites More sharing options...
Whozdär Posted May 26, 2023 Share Posted May 26, 2023 Hello! Quick question - why is the guard frequency not having the same sound effects as the VHF/UHF? Voices sound almost as clean as on discord voice, and it always comes across a bit weirdly. Am I missing some setting? Can anyone advise if I'm doing something wrong? Is it as designed? Thank you! Link to comment Share on other sites More sharing options...
YellaHammer Posted June 15, 2023 Share Posted June 15, 2023 I have watched several SRS videos and set all settings as recommended but every time I go into a multiplayer server my mic is hot without pressing the assigned ptt button. Spent hours watching and re watching multiple videos, checking each setting and still can't get it to work. Works fine on other sim platforms using live atc. In addition to the other Issues and bugs, my frustration with DCS is 99.5 of 100. I there someone that can help me figure this out...please. Reff. F18, X56 HOTAS Link to comment Share on other sites More sharing options...
Tholozor Posted June 16, 2023 Share Posted June 16, 2023 Better to ask for help in the SRS thread: REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/ Link to comment Share on other sites More sharing options...
EcosseFlyer Posted July 20, 2023 Share Posted July 20, 2023 Hi all This is probably an easy answer but just wanted to check. I primarily use the Huey in MP(which has its own quirks in SRS in how it uses it) and have bound my triggers on my Warthog as the primary comms switches as per the real helo. However if i use another plane the trigger obviously is used for shooting so I assume if i create a SRS profile for each of the modules i use with specific controls and switch between them this would allow me to use the Huey trigger as the PTT within SRS without causing an open mic etc? Wookie My Rig: AMD Ryzen 3600XT@4.4GHz+ || MSI B450 Tomahawk Max || MSI RTX 2060 Gaming Z || 32GB Corsair Vengance DDR4 RAM@3200 || 32" Monitor || Win 10 Home || TM Warthog HOTAS || Logitech ProFlight Pedals || TrackHat Clip || Rift S Modules: A-10C & A-10C II || KA-50 2 & 3 || FC3 || CA || UH-1H || AV-8B || L-39 || F-86F || F-5 II || Mi-8 || M-2000C || F/A-18 || SA-342 || Super Carrier || F-14A/B || AH-64D Maps: Caucasus || NTTR || Persian Gulf || Marianas || Syria Link to comment Share on other sites More sharing options...
Recommended Posts