jonss Posted September 28, 2016 Posted September 28, 2016 System specs: Asus p9x79 pro mb. 16 gb ram. evga gtx 1080 8 gb vm. 875 watt psu. 512 gb ssd. Monitor: Asus pg348q 13440 x 1440 resolution @ 100 hz. I have many of my settings reduced to medium, attempting to get fps but warthog runs at 4 fps. DCS World is running very slowly between screens. Almost done with dcs world , at least untul I can resolve this problem. Anyone?
Esac_mirmidon Posted September 28, 2016 Posted September 28, 2016 Maybe de 3440x1440 is to much to handle for the 1080. This monitor is WQHD " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
Art-J Posted September 28, 2016 Posted September 28, 2016 Single digit figures still sound too extreme for 1080 though. Windows version? Driver version? Driver and in-game settings? More info is needed to investigate. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10.
firmek Posted September 28, 2016 Posted September 28, 2016 1080 is more than capable to run at WQHD. Did you try with other games? Might be an issue with the drivers. Did you uninstall old one before installing the card? Maybe a stupid question - but are you sure that the card is installed in PCIe x16 slot? Also make sure that you're using the DisplayPort cable - not HDMI. This is required for G-SYNC and 100Hz refresh rate to work correctly with that monitor. F/A-18, F-16, F-14, M-2000C, A-10C, AV-8B, AJS-37 Viggen, F-5E-3, F-86F, MiG-21bis, MiG-15bis, L-39 Albatros, C-101 Aviojet, P-51D, Spitfire LF Mk. IX, Bf 109 4-K, UH-1H, Mi-8, Ka-50, NTTR, Normandy, Persian Gulf... and not enough time to fully enjoy it all
joey45 Posted September 28, 2016 Posted September 28, 2016 CPU? The only way to make sense out of change is to plunge into it, move with it, and join the dance. "Me, the 13th Duke of Wybourne, here on the ED forums at 3 'o' clock in the morning, with my reputation. Are they mad.." https://ko-fi.com/joey45
Clepper Posted September 28, 2016 Posted September 28, 2016 same here 35 to 8 fps with medium settings after updating to 1.5.4.57114.167 hotfix
AJaromir Posted September 29, 2016 Posted September 29, 2016 (edited) Clepper, try to turn off Depth of field and mirrors if they are and then write if it helped. Theese 2 things are the biggest FPS eater in game. Also what is your CPU? Edited September 29, 2016 by AJaromir
Feuerfalke Posted October 2, 2016 Posted October 2, 2016 Maybe de 3440x1440 is to much to handle for the 1080. This monitor is WQHD It's design to run VR with 2x FullHD at 60 FPS with full detail on modern games... When I got my GTX1080, it ran DCS with 120+ FPS. When I fired it up a gain a few patches later, I found myself with 25 fps. Same drivers, same settings, same mission, so that is most certainly not a problem with hardware. Gigabyte GA-Z87-UD3H | i7 4470k @ 4.5 GHz | 16 GB DDR3 @ 2.133 Ghz | GTX 1080 | LG 55" @ 4K | Cougar 1000 W | Creative X-Fi Ti | TIR5 | CH HOTAS (with BU0836X-12 Bit) + Crosswind Pedals | Win10 64 HP | X-Keys Pro 20 & Pro 54 | 2x TM MFD
Esac_mirmidon Posted October 2, 2016 Posted October 2, 2016 Well you must test the new GPU in Nevada and the most recent EDGE version. There it brights as supossed to be. 1.5 is still very CPU dependant and a more powerfull GPU doesn´t make almost any difference. I´ve passed from a 770 to a 1060 and the gain in Nevada is amazing but in 1.5 i have exactly the same FPS. So. Wait for the 2.5 merge. " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
Feuerfalke Posted October 2, 2016 Posted October 2, 2016 Very true. Still there WAS a noteable performance-increase even with the 1.5 engine coming from my old graphics card to the GTX 1080. And that was pretty much nullified for whatever reason. Well, ED will probably not waste too much time looking into 1.5 performance problems, with the merged version at the horizon. Gigabyte GA-Z87-UD3H | i7 4470k @ 4.5 GHz | 16 GB DDR3 @ 2.133 Ghz | GTX 1080 | LG 55" @ 4K | Cougar 1000 W | Creative X-Fi Ti | TIR5 | CH HOTAS (with BU0836X-12 Bit) + Crosswind Pedals | Win10 64 HP | X-Keys Pro 20 & Pro 54 | 2x TM MFD
firmek Posted October 3, 2016 Posted October 3, 2016 Well you must test the new GPU in Nevada and the most recent EDGE version. There it brights as supossed to be. 1.5 is still very CPU dependant and a more powerfull GPU doesn´t make almost any difference. I´ve passed from a 770 to a 1060 and the gain in Nevada is amazing but in 1.5 i have exactly the same FPS. So. Wait for the 2.5 merge. Guys let's be more pragmatic with the statements. Someone could interpret it as that changing GPU does not bring any performance increase in 1.5. DCS might be CPU heavy but other than that it's just the same as other 3D programs that will benefit from a better GPU. I would also take the DCS-CPU mantra with a grain of salt. When looking on the performance statistics DCS 1.5 uses a part of the CPU power while GPU is usually maxed at 100%. This clearly indicates that GPU is at its limit while CPU related code could be more optimized. Anyway, I've upgraded from GTX 660TI to GTX 1070 while keeping not so new Intel 3570K. The performance gain is easily noticeable in 1.5 - further more this is after changing the 1980x1020 monitor to 3440x1440. In other words after upgrading to 1070 DCS 1.5 runs with better performance at more than double the resolution than it was with 660Ti. What didn't change is CPU still utilizing mainly a single core not even being close to 100% while the GPU is maxed out. F/A-18, F-16, F-14, M-2000C, A-10C, AV-8B, AJS-37 Viggen, F-5E-3, F-86F, MiG-21bis, MiG-15bis, L-39 Albatros, C-101 Aviojet, P-51D, Spitfire LF Mk. IX, Bf 109 4-K, UH-1H, Mi-8, Ka-50, NTTR, Normandy, Persian Gulf... and not enough time to fully enjoy it all
Esac_mirmidon Posted October 3, 2016 Posted October 3, 2016 I would said " a more powerful GPU over certain point " Yes, changing GPU is very important in FPS IF YOU HAVE AN OLD graphic card. In my case from a 560 to a 770 the improvement in FPS was very noticeable. But from my 770 to my new 1060, not a single FPS more in 1.5 but in Nevada the change is massive. So yes, you could benefit changing your GPU in 1.5 and the older engine version below 770 series to a better one, but over this graphic card series no benefit at all for 1.5. Only for new EDGE version in Nevada. This is why i recommend to wait until the 2.5 merge to buy a new 10xx series for a lower price to anyone who is struggling thinking a better GPU is going to improve FPS in 1.5 " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
Tj1376 Posted October 8, 2016 Posted October 8, 2016 (edited) 4 fps in DCS World It's design to run VR with 2x FullHD at 60 FPS with full detail on modern games... When I got my GTX1080, it ran DCS with 120+ FPS. When I fired it up a gain a few patches later, I found myself with 25 fps. Same drivers, same settings, same mission, so that is most certainly not a problem with hardware. Agree with this statement and honestly am frustrated with the lack of support and the direction this thread has gone. Can we get some suggestions other than wait for 2.5? Seriously last week I was averaging 90fps with no stutters. Now I'm getting drops as low as 15 fps. My lowest previously was 45 fps. Something changed in last Friday's patch and I seriously wish I could just roll it back. Also of note: gpu and cpu usage (on a single core) no longer even come close to 100 percent. CPU 1 only averages fifty percent while playing and does not scale up when looking at complex areas (towns, runways, etc.) GPU sits mostly around 70-80 percent utilization. Prior to the patch, I'd max out my GPU without any problem (although rarely maxed out core 1 of the cpu.) Any suggestions on how to roll the previous patch back? Appreciate the support. TJ Sent from my iPhone using Tapatalk Edited October 8, 2016 by Tj1376
wolle Posted October 8, 2016 Posted October 8, 2016 Agree with this statement and honestly am frustrated with the lack of support and the direction this thread has gone. Can we get some suggestions other than wait for 2.5? Seriously last week I was averaging 90fps with no stutters. Now I'm getting drops as low as 15 fps. My lowest previously was 45 fps. Something changed in last Friday's patch and I seriously wish I could just roll it back. Also of note: gpu and cpu usage (on a single core) no longer even come close to 100 percent. CPU 1 only averages fifty percent while playing and does not scale up when looking at complex areas (towns, runways, etc.) GPU sits mostly around 70-80 percent utilization. Prior to the patch, I'd max out my GPU without any problem (although rarely maxed out core 1 of the cpu.) Any suggestions on how to roll the previous patch back? Appreciate the support. TJ Sent from my iPhone using Tapatalk See this: https://forums.eagle.ru/showthread.php?t=114030 [sIGPIC][/sIGPIC] Intel Core I7 4820K @4.3 GHz, Asus P9X79 motherboard, 16 GB RAM @ 933 MHz, NVidia GTX 1070 with 8 GB VRAM, Windows 10 Pro
Tj1376 Posted October 8, 2016 Posted October 8, 2016 See this: https://forums.eagle.ru/showthread.php?t=114030 That is awesome. Thank you! But reading through the docs, the last update was 9/10. September tenth? I get an update it seems almost every week. TJ Sent from my iPhone using Tapatalk
Tj1376 Posted October 8, 2016 Posted October 8, 2016 That is awesome. Thank you! But reading through the docs, the last update was 9/10. September tenth? I get an update it seems almost every week. TJ Sent from my iPhone using Tapatalk Nevermind. Realized I was only reading the Alpha documentation. TJ Sent from my iPhone using Tapatalk
Tj1376 Posted October 8, 2016 Posted October 8, 2016 Well dang. Going back to the 9/27 version did not resolve the problem. I'll try a fresh install later. It's just so frustrating. Literally nothing has changed with my setup and my gpu now sits around 50-70 percent utilized while my fps tanks below 30. Nothing has changed on my pc... TJ Sent from my iPhone using Tapatalk
IJG2_Bouma Posted October 10, 2016 Posted October 10, 2016 Its matter of settings as always. this little trick perhaps can help you. This is a video to show the effects of Shadowplay on DCS. It seems to work With OBS too ! I found a trick to run DCS world very smooth with more than 100 FPS. My Config PC : i5 2500k / 8GB RAM / GTX 970 By recording with Nvidia Shadowplay something seems to be unlocked on DCS and the FPS double immediately ! Nothing to do with Xbox app DVR wich is already OFF. [sIGPIC][/sIGPIC]https://discord.gg/uzdHvPa http://www.1jg2.net
Spc Johnson Posted October 24, 2016 Posted October 24, 2016 (edited) Ive got the same issues in DCS where it runs good\decent for the first 10-20 minutes then nosedives to 5-10 fps and wont recover. I havent played DCS in a few weeks due to my job so I had a few patches to install but it's VERY noticably unstable now. Also Im running DCS on the minimum now to try and keep some speed because its uncontrolable in this state. RIG CPU- AMD 8350 4.2Ghz RAM- 16Gb GPU- GeForce GTX 660 HD- SSD Edited October 24, 2016 by Spc Johnson grammar
Spc Johnson Posted October 25, 2016 Posted October 25, 2016 Figured out low framerate issue Ive discovered why my computer has been running DCS very poorly. I have a GeForce GPU and it has a addon called 'ShadowPlay' and disabling that has restored my framerate to a stable 40-50fps with occasional boosts to nearly 90fps.
Kroll Posted October 25, 2016 Posted October 25, 2016 My brother had this problem with the recent update. He runs 3 monitors. He moved back to one monitor and it solve the problem. So check your monitor settings. He never had this problem b4 the latest update. Hope this helps.
MPK Posted October 25, 2016 Posted October 25, 2016 By recording with Nvidia Shadowplay something seems to be unlocked on DCS and the FPS double immediately ! Ive discovered why my computer has been running DCS very poorly. I have a GeForce GPU and it has a addon called 'ShadowPlay' and disabling that has restored my framerate to a stable 40-50fps with occasional boosts to nearly 90fps. You can't both be right :music_whistling:
Spc Johnson Posted October 26, 2016 Posted October 26, 2016 You can't both be right :music_whistling: Perhaps its an issue with Windows 10, I had only upgraded to Win10 2 months ago and I never had unusual issues with fps in Win7. Im still not having framerate problems with DCS in either 1.5 or 2.0 in even the most packed servers.
Recommended Posts