Jump to content

[Official] SimShaker for Aviators


Recommended Posts

Hi there, I have a 2 bass shakers configuration, on the Andy website I saw that simshaker assume by default that the shakers are left and righ but the user can configure the position.

Mine are on my back and under my seat, how I can change the position ?

"2 (stereo) - suitable if you operate 2 bass-shakers. I assume that bass-shakers are placed left and right of the player. Out of the box SimShaker is configured for such placement. But that may be customized by the player."

Link to comment
Share on other sites

15 hours ago, X_legio said:

Hi there, I have a 2 bass shakers configuration, on the Andy website I saw that simshaker assume by default that the shakers are left and righ but the user can configure the position.

Mine are on my back and under my seat, how I can change the position ?

"2 (stereo) - suitable if you operate 2 bass-shakers. I assume that bass-shakers are placed left and right of the player. Out of the box SimShaker is configured for such placement. But that may be customized by the player."

Please ask you question in the correct thread:


This thread is usually for SSA questions only...

  • Like 1
Link to comment
Share on other sites

Running SimShaker for Aviators Beta 2.3.14.0 - has the gun effect from the F-5E gone? I'm sure it used to work, but now even with 'Cannon/Gun Fire' set to 100, I don't see any output in the Effects Monitor, anyone else?

Link to comment
Share on other sites

On 5/30/2022 at 10:55 PM, mrprime said:

Running SimShaker for Aviators Beta 2.3.14.0 - has the gun effect from the F-5E gone? I'm sure it used to work, but now even with 'Cannon/Gun Fire' set to 100, I don't see any output in the Effects Monitor, anyone else?

Reinstalled to SSA stable 2.4.0.0 and problem went away, I must have stuffed something up. Ignore.

Link to comment
Share on other sites

Hi please help, i have the Beta version and for some reason in DCS and using the F18 it constantly plays a test profile and does not stop see the log below:

I have since uninstalled and reinstalled but that did not work, i have now unistalled the Beta version and installed the Stable version, but now i cannot feel gun fire at all or missle fire even with the strength at 100.  I can have the engine rumble at say 30 but then when i fire guns the engine vibration stops but no feeling for guns or missles 

 

This is a payware add-on by Andre for SimShaker for Aviators software.

Please read carefully User Guide at simshaker.com website.

 

16:27:2.719 SimShaker Sound Module | Version 2.26

16:27:2.733 Got settings from Soundmodule.cfg

16:27:2.855 Activation by MSA email address is available

16:27:3.12 UDP Receiver started

16:27:3.222 Received: so_99_2_1~1~55~1

16:27:3.227 Received: so_99_2_1~1~55~1

16:27:3.234 so_99_2_1 sample is already playing, start command skipped

16:27:3.235 Received: so_99_2_1~1~55~1

16:27:3.236 so_99_2_1 sample is already playing, start command skipped

16:27:3.252 Received: so_99_2_1~1~55~1

16:27:3.253 so_99_2_1 sample is already playing, start command skipped

16:27:3.326 Received: so_99_2_1~1~55~1

16:27:3.327 so_99_2_1 sample is already playing, start command skipped

16:27:3.403 Received: so_99_2_1~1~55~1

16:27:3.478 Received: so_99_2_1~1~55~1

16:27:3.479 so_99_2_1 sample is already playing, start command skipped

16:27:3.552 Received: so_99_2_1~1~55~1

16:27:3.626 Received: so_99_2_1~1~55~1

16:27:3.627 so_99_2_1 sample is already playing, start command skipped

16:27:3.704 Received: so_99_2_1~1~55~1

16:27:3.778 Received: so_99_2_1~1~55~1

16:27:3.779 so_99_2_1 sample is already playing, start command skipped

16:27:3.780 Good news. This application version is up to date

16:27:3.854 Received: so_99_2_1~1~55~1

16:27:3.929 Received: so_99_2_1~1~55~1

16:27:3.930 so_99_2_1 sample is already playing, start command skipped

16:27:4.4 Received: so_99_2_1~1~55~1

16:27:4.76 Received: so_99_2_1~1~55~1

16:27:4.76 so_99_2_1 sample is already playing, start command skipped

16:27:4.148 Received: so_99_2_1~1~55~1

16:27:4.229 Received: so_99_2_1~1~55~1

16:27:4.230 so_99_2_1 sample is already playing, start command skipped

16:27:4.304 Received: so_99_2_1~1~55~1

16:27:4.380 Received: so_99_2_1~1~55~1

16:27:4.381 so_99_2_1 sample is already playing, start command skipped

16:27:4.455 Received: so_99_2_1~1~55~1

16:27:4.530 Received: so_99_2_1~1~55~1

16:27:4.531 so_99_2_1 sample is already playing, start command skipped

16:27:4.604 Received: so_99_2_1~1~55~1

16:27:4.679 Received: so_99_2_1~1~55~1

16:27:4.680 so_99_2_1 sample is already playing, start command skipped

16:27:4.754 Received: so_99_2_1~1~55~1

16:27:4.829 Received: so_99_2_1~1~55~1

16:27:4.830 so_99_2_1 sample is already playing, start command skipped.

 

******this is the log for stable version below*********

 

22:46:6.327 SimShaker Sound Module | Version 2.26

22:46:7.494 Good news. This application version is up to date

22:54:11.538 Received: piston_beat~1~27~4

22:54:11.539 piston_beat sample is already playing, start command skipped

22:54:11.564 Received: piston_beat~1~27~4

22:54:11.571 piston_beat sample is already playing, start command skipped

22:54:11.604 Received: piston_beat~1~27~4

22:54:11.629 Received: piston_beat~1~27~4

22:54:11.630 piston_beat sample is already playing, start command skipped

22:54:11.660 Received: piston_beat~1~27~4

22:54:11.661 piston_beat sample is already playing, start command skipped

22:54:11.687 Received: piston_beat~1~27~4

22:54:11.727 Received: piston_beat~1~27~4

22:54:11.728 piston_beat sample is already playing, start command skipped

22:54:11.753 Received: piston_beat~1~27~4

22:54:11.754 piston_beat sample is already playing, start command skipped

22:54:11.790 Received: piston_beat~1~27~4

22:54:11.828 Received: piston_beat~1~27~4

22:54:11.839 piston_beat sample is already playing, start command skipped

22:54:11.845 Received: piston_beat~1~27~4

22:54:11.846 piston_beat sample is already playing, start command skipped

22:54:11.880 Received: piston_beat~1~27~4

22:54:11.908 Received: piston_beat~1~27~4

22:54:11.909 piston_beat sample is already playing, start command skipped

22:54:11.947 Received: piston_beat~1~27~4

22:54:11.987 Received: piston_beat~1~27~4

22:54:11.987 piston_beat sample is already playing, start command skipped

22:54:12.25 Received: piston_beat~1~27~4

22:54:12.52 Received: piston_beat~1~27~4

22:54:12.52 piston_beat sample is already playing, start command skipped

22:54:12.78 Received: piston_beat~1~27~4

22:54:12.79 piston_beat sample is already playing, start command skipped

22:54:12.112 Received: piston_beat~1~27~4

22:54:12.139 Received: piston_beat~1~27~4

22:54:12.140 piston_beat sample is already playing, start command skipped

22:54:12.179 Received: piston_beat~1~27~4

22:54:12.204 Received: piston_beat~1~27~4

22:54:12.205 piston_beat sample is already playing, start command skipped

22:54:12.242 Received: piston_beat~1~27~4

22:54:12.243 piston_beat sample is already playing, start command skipped

22:54:12.270 Received: piston_beat~1~27~4

22:54:12.297 Received: piston_beat~1~27~4

22:54:12.299 piston_beat sample is already playing, start command skipped

22:54:12.334 Received: piston_beat~1~27~4

22:54:12.335 piston_beat sample is already playing, start command skipped

22:54:12.361 Received: piston_beat~1~27~4

22:54:12.400 Received: piston_beat~1~27~4

22:54:12.401 piston_beat sample is already playing, start command skipped

22:54:12.427 Received: piston_beat~1~27~4

22:54:12.453 Received: piston_beat~1~27~4

22:54:12.454 piston_beat sample is already playing, start command skipped

22:54:12.483 Received: piston_beat~1~27~4

22:54:12.485 piston_beat sample is already playing, start command skipped

22:54:12.522 Received: piston_beat~1~27~4

22:54:12.549 Received: piston_beat~1~27~4

22:54:12.550 piston_beat sample is already playing, start command skipped

22:54:12.586 Received: piston_beat~1~27~4

22:54:12.587 piston_beat sample is already playing, start command skipped

 

Link to comment
Share on other sites

3 hours ago, Kila iceman said:

Hi please help, i have the Beta version and for some reason in DCS and using the F18 it constantly plays a test profile and does not stop see the log below:

I have since uninstalled and reinstalled but that did not work, i have now unistalled the Beta version and installed the Stable version, but now i cannot feel gun fire at all or missle fire even with the strength at 100.  I can have the engine rumble at say 30 but then when i fire guns the engine vibration stops but no feeling for guns or missles 

 

Worth asking just in case, you haven't turned unlimited ammo in DCS on by any chance have you?

AMD 5800X3D · MSI 4080 · Asus ROG Strix B550 Gaming  · HP Reverb Pro · 1Tb M.2 NVMe, 32Gb Corsair Vengence 3600MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · VIRPIL T-50CM3 Base, Alpha Prime R. VIRPIL VPC Rotor TCS Base. JetSeat

Link to comment
Share on other sites

Hi Baldrick33, 

 

yes I checked today, they are turned off, so the unlimited weapons etc.  I reinstalled the stable version again and same thing when I fire guns I get no feeling in either f5, f18, p51, or ka50 

 

not sure what else to try 

Link to comment
Share on other sites

I’ve been using the Simshaker Jetpad for a few months now, and love it!

But recently I’ve noticed one of the things that vibrates isn’t vibrating. It’s one of the two at the base of my back, and is responsible for the vibration of the afterburner. 

I haven’t installed the latest version of the software from April, could that be the problem? Is this a common issue and easily fixed, or not so much?

Thanks in advance for any help/advice.

Link to comment
Share on other sites

Hi.

Been using SSA for ages no issues. 
 

Test in SSM and SSA works fine. Sometimes when I fly it works, sometimes it doesn’t. When I change the main audio out in game to speaker it works but I loose audio through my G1 headphones. 
 

Using a buttkicker. 
 

Many thanks. 
 

Tim

C3A3C402-65DF-4426-A93D-AF3864FEB80D.jpeg

8DA00000-DD50-4099-8711-1731D9A775D4.jpeg

Link to comment
Share on other sites

1 hour ago, stiggie said:

Hi.

Been using SSA for ages no issues. 
 

Test in SSM and SSA works fine. Sometimes when I fly it works, sometimes it doesn’t. When I change the main audio out in game to speaker it works but I loose audio through my G1 headphones. 
 

Using a buttkicker. 
 

Many thanks. 
 

Tim

C3A3C402-65DF-4426-A93D-AF3864FEB80D.jpeg

8DA00000-DD50-4099-8711-1731D9A775D4.jpeg

I guess you depend on what Windows and DCS think is "Default". Please manually select the proper device within DCS and I thin you would be golden.

i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | DIY Collective | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | 2x bass shakers pedal plate| SIMple SIMpit chair | WinWing TakeOff panel | PointCTRL v2 | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP

FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle

Link to comment
Share on other sites

2 hours ago, Ala12Rv-Tundra said:

I guess you depend on what Windows and DCS think is "Default". Please manually select the proper device within DCS and I thin you would be golden.

So if I select speaker as the main audio out it works, but I have no audio through the headphones on my G1, even if I set the headphones option to Headphones. 

Link to comment
Share on other sites

2 hours ago, stiggie said:

So if I select speaker as the main audio out it works, but I have no audio through the headphones on my G1, even if I set the headphones option to Headphones. 

I think you need to check the "Hear like in helmet" option for some game sound playing via your speakers, and others like RWR and radio, playing via your VR headset

i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | DIY Collective | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | 2x bass shakers pedal plate| SIMple SIMpit chair | WinWing TakeOff panel | PointCTRL v2 | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP

FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle

Link to comment
Share on other sites

  • 2 weeks later...

Hi,

I need help.

Been away from DCS for a few months and now simshaker doen't work,

It works flawlessly on MSFS and sound module is working also because on test button it works, 

But it doesn't do nothing in DCS. It was working without any problem before.

Thsnks.


Edited by alexbap

Windows 7 Professional x64, EVGA GTX 1060 6GB,

Intel Xeon W5650(i7) @ 4.1ghz, Asus P6TWS motherboard, 24gb DDR3, 500GB SSD.

Hybrid joystick(Base: Saitek X55 - Grip:CH Fighterstick), Saitek X55 throttle, Saitek ruder pedals.

Link to comment
Share on other sites

4 hours ago, alexbap said:

Hi,

I need help.

Been away from DCS for a few months and now simshaker doen't work,

It works flawlessly on MSFS and sound module is working also because on test button it works, 

But it doesn't do nothing in DCS. It was working without any problem before.

Thsnks.

 

Usually the issue is in the export.lua. Can you show me the file?

Link to comment
Share on other sites

Where can I find that file?

There's this folder,

"C:\Program Files (x86)\SimShaker\SimShaker for Aviators Beta\Data\dcs-export-core\"

and inside there is a "ExportCore.lua". Is that it?

 

ExportCore.lua


Edited by alexbap

Windows 7 Professional x64, EVGA GTX 1060 6GB,

Intel Xeon W5650(i7) @ 4.1ghz, Asus P6TWS motherboard, 24gb DDR3, 500GB SSD.

Hybrid joystick(Base: Saitek X55 - Grip:CH Fighterstick), Saitek X55 throttle, Saitek ruder pedals.

Link to comment
Share on other sites

Hey, i use sim shaker for aviators with simshaker sound module with the buttkicker gamer 2. All works fine except when i start a game flying the FA18 the wings fold only works once? The first mission i load as i am unfolding my wings i get vibration, but say i start the mission again i wont get any vibration with the wings fold? even if i quit to main menu and load campaign again it still wont work only the first time. I have to completely close down DCS and everything and restart everything up to get it to work. Any ideas? 

Link to comment
Share on other sites

On 6/23/2022 at 3:18 PM, alexbap said:

Where can I find that file?

There's this folder,

"C:\Program Files (x86)\SimShaker\SimShaker for Aviators Beta\Data\dcs-export-core\"

and inside there is a "ExportCore.lua". Is that it?

 

ExportCore.lua 1.82 kB · 2 downloads

 

No, I mean the export.lua from you DCS profile folder

On 6/25/2022 at 7:48 AM, danos_2503 said:

Hey, i use sim shaker for aviators with simshaker sound module with the buttkicker gamer 2. All works fine except when i start a game flying the FA18 the wings fold only works once? The first mission i load as i am unfolding my wings i get vibration, but say i start the mission again i wont get any vibration with the wings fold? even if i quit to main menu and load campaign again it still wont work only the first time. I have to completely close down DCS and everything and restart everything up to get it to work. Any ideas? 

There is a threshold in the settings to configure the speed the "folding" must have to feel the effect. did you play around with this value?

Link to comment
Share on other sites

On 6/12/2022 at 8:52 PM, stiggie said:

So if I select speaker as the main audio out it works, but I have no audio through the headphones on my G1, even if I set the headphones option to Headphones. 

Any advances on this issue?

Link to comment
Share on other sites

On 6/27/2022 at 2:45 PM, danos_2503 said:

@f4l0 is this setting under special options? ( foldable wings movement filter)? if so default was 2 i tried a few different numbers, but didnt work. Weird it works fine the first time, just not again until i fly the next night. 

When I'm back from the summer break, I'll have a look...

Link to comment
Share on other sites

My power cable broke, I've tried 4 different cables with the same plug. 3 of them gives constant vibration. That doesn't stop as long as its on.

The 3rd one gives power but no vibration when  I run tests(neither in simshaker wings. Aviator or wheels)

i7 13700k @5.2ghz, GTX 3090, 64Gig ram 4800mhz DDR5, M2 drive.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...