Jump to content

Mission 4 bug? Comms issue


Recommended Posts

Hey guys,

 

so I have confirmed that the radios are set to the correct frequency t/r

 

Radio 1 AM, 2 UHF, 3 FM.

 

Earlier in the mission and in previous missions Im not sure if this was the case with Overlord. UHF and the VHM AM were correct.

 

However I do know that I did order Overlord to send in Bravo after I had fixed the radio issue, bravo moved in.

 

Bravo has been sitting there for 5-10 minutes and I havent gotten any comms.

 

So, I'm RTB.

 

I also never got any response from UZI after their recce run.

 

So, not sure if this is a bug or not, but assistance would be welcome

Link to comment
Share on other sites

In Mission 5, all comms are set correctly,

 

radio communication between myself and the checkpoints is decidedly one sided.

 

My character is responding to them however. Is this a bug?

 

(This was resolved, i appear to have had my radios on guard channel)


Edited by Robdcamp88
Link to comment
Share on other sites

  • 2 weeks later...

I've had two CTDs in Mission 4, when starting the attack against Echo 2's position.

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

Hey!

I am currently away from my flying rig, so can't check it, but perhaps it is a similar issue to this one: https://forums.eagle.ru/showthread.php?p=3055965#post3055965

 

Not much I can do as a mission builder about the CTDs, but hopefully the new patch will fix the problem with ground units reported in the linked thread.

 

Cheers,

 

BD

ce535d_9d347b62819c4372b3c485a4f95d2004~mv2.png
Link to comment
Share on other sites

Possible I suppose. Later today I will try to post a log and trk. Where would they be located?

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

I've been sick all week and am just now able to get back on the gaming computer. Here is everything from Saved Games\DCS\Logs.

Logs.zip


Edited by RogueSqdn

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

This may have been mission 5... I lost count. :)

 

At any rate, I got through it by going on low detail, and looking at the log there may be a tracer issue. Not sure.

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

Glad you made it through! I will do a very detailed overview and overhaul of Enemy Within once 2.5 is out (together with releasing some of the missions in MP version), but until that update I will keep it just to bug - squashing, though many of them are not on my end. Hope you enjoy the campaign!

ce535d_9d347b62819c4372b3c485a4f95d2004~mv2.png
Link to comment
Share on other sites

  • 5 months later...

I have a similar problem. I can't hear Overlord. He seems to be talking, cause my guy answers (such as "Copy Overlord, bla bla...").

 

But I don't hear him.

 

The radio on my top left is set to the Uzi frequency (144 AM)

The UHF is left at 251

The last radio of my lower left is set to 33 FM (I set the numbers to 3 - 3 - 0 - 00, so that's 33 right?).

 

Both VHF radios are at TR and the UHF is at Main (or Both, I don,t recall).

 

I thought I was doing it right, isn't it?

Windows 10-64bits, i7-8700k, GTX 1080Ti, 32 Gb RAM, MSI Monitor 32in 165Hz.

 

Mirage 2000C, F5-E, Mig21bis, A10-C, FC3, F-18, AV-8B N/A, F-14, F-16, SuperCarrier

Link to comment
Share on other sites

Well nvm, it's just me not understanding the radios on the A10-C....

 

I thought that the knob selector for "FM, AM, Manual, etc" was to be used to choose which radio is for FM which is for AM.

 

Turns out it's fixed... the lowest one is FM and the top one is AM and you must leave the selector at Manual.

 

I don't quite understand what that knob is for then, I'll check the manual.

 

But, that solved my problem.

Windows 10-64bits, i7-8700k, GTX 1080Ti, 32 Gb RAM, MSI Monitor 32in 165Hz.

 

Mirage 2000C, F5-E, Mig21bis, A10-C, FC3, F-18, AV-8B N/A, F-14, F-16, SuperCarrier

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...