Jump to content

Oculus tray tool


boedha68
 Share

Recommended Posts

Discovered the eye of columbus?

 

I found this. Installed it and get far more fps in DCS!

 

I got my settings higher and still 90 fps.

 

Why was this not mentioned before...:huh:

 

 

Here it is grab it. :thumbup:

 

https://forums.oculus.com/community/discussion/47247/oculus-traytool-supersampling-profiles-hmd-disconnect-fixes-hopefully

New system:I9-9900KS, Kingston 64 GB DDR4 3200Mhz, RTX 3080(OC 2070 Mhz), Corsair H150 Pro RGB, Samsung 970 EVO 1 Tb, Scandisk m2 500 MB, 2 x Crucial 1 Tb, T16000M HOTAS, HP Reverb Professional, Corsair 750 Watt.

 

Old system:I7-4770K(OC 4.5Ghz), Kingston 24 GB DDR3 1600 Mhz,MSI RTX 2080(OC 2070 Mhz), 2 * 500 GB SSD, 3,5 TB HDD, 55' Samsung 3d tv, Trackir 5, Logitech HD Cam, T16000M HOTAS. All DCS modules, maps and campaigns:pilotfly:

Link to comment
Share on other sites

Yep. Don't know why. I installed it in the oculus directory. Make profile and checked the readme.txt. 90 fps.. So i cranked up the settings. For me it works.

New system:I9-9900KS, Kingston 64 GB DDR4 3200Mhz, RTX 3080(OC 2070 Mhz), Corsair H150 Pro RGB, Samsung 970 EVO 1 Tb, Scandisk m2 500 MB, 2 x Crucial 1 Tb, T16000M HOTAS, HP Reverb Professional, Corsair 750 Watt.

 

Old system:I7-4770K(OC 4.5Ghz), Kingston 24 GB DDR3 1600 Mhz,MSI RTX 2080(OC 2070 Mhz), 2 * 500 GB SSD, 3,5 TB HDD, 55' Samsung 3d tv, Trackir 5, Logitech HD Cam, T16000M HOTAS. All DCS modules, maps and campaigns:pilotfly:

Link to comment
Share on other sites

Sounds great. I will definitely try it out. Can anyone else confirm an increase in FPS?

A warrior's mission is to foster the success of others.

i9-9900K | MSI RTX 3080Ti Suprim X | 32 GB Ram 3200 MHz DDR-4 | Asus Maximus Hero X | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2

RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss

Link to comment
Share on other sites

Nope, I didnt see any noticeable performance increase, or difference. But interesting with the 'Show Performance', to see the dump my performance headroom takes, with just shadows on low.

Really wish we could get the shadows separated, so that we could have cockpit shadows on, while the rest of the world was off.

- Jack of many DCS modules, master of none.

- Personal wishlist: F-15A, F-4S Phantom II, JAS 39A Gripen, SAAB 35 Draken, F-104 Starfighter, Panavia Tornado IDS.

 

| MSI Z87-G45 Gaming | i5-4670K @ 4.3Ghz | 32Gb DDR3 1600 | Asus GTX 1070 Strix OC | Samsung 850 Evo 250 & 500Gb | 40" Sony FullHD | Oculus Rift CV1 | Thrustmaster Warthog Stick (19.5cm extension) & Throttle | MFG Crosswind | Windows 10 |

Link to comment
Share on other sites

Nope, I didnt see any noticeable performance increase, or difference.

Interesting! So this tool is mainly good for setting the pixel density etc without using the Oculus SDK?

A warrior's mission is to foster the success of others.

i9-9900K | MSI RTX 3080Ti Suprim X | 32 GB Ram 3200 MHz DDR-4 | Asus Maximus Hero X | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2

RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss

Link to comment
Share on other sites

I had been having sensor disconnects running my Rift with the Innatek card with Fresco drivers, looking like this tool may have solved those disconnects for me... need more testing but looking good so far.

Don B

My VKB Gunfighter MK III Pro L Review

EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|

Link to comment
Share on other sites

Would it be possible to see few screen shots of settings?

Is it possible to zoom in rift? If yes where axis or a button can be sett. I cant find VR zoom anywhere in game settings.

I am having hard time spotting ground targets in SU25T at ranges 2km+ I have supper sampling sett to 1.8 and models set to Large with no effect. I am sure I am doing something wrong.

Link to comment
Share on other sites

Would it be possible to see few screen shots of settings?

Is it possible to zoom in rift? If yes where axis or a button can be sett. I cant find VR zoom anywhere in game settings.

I am having hard time spotting ground targets in SU25T at ranges 2km+ I have supper sampling sett to 1.8 and models set to Large with no effect. I am sure I am doing something wrong.

 

VR zoom assignment is in the UI layer of the controller menu ( near the bottom).

You can assign a button from there.

Don B

My VKB Gunfighter MK III Pro L Review

EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|

Link to comment
Share on other sites

Interesting! So this tool is mainly good for setting the pixel density etc without using the Oculus SDK?

 

Yea that is my feeling, and an easy to way to profile different titles with a given PD.

Plus it seems to fix it for those that are having tracking and disconnect problems.

 

Would it be possible to see few screen shots of settings?

Is it possible to zoom in rift? If yes where axis or a button can be sett. I cant find VR zoom anywhere in game settings.

I am having hard time spotting ground targets in SU25T at ranges 2km+ I have supper sampling sett to 1.8 and models set to Large with no effect. I am sure I am doing something wrong.

 

Ill just quote myself from another thread

 

They are adding dots in post since a few patches ago. Can see them trough fog for example, they are rendered on top. So at distance X, a dot of given size is rendered on top. This post processed dot disappears again, when given target is within around 1½-2km, give and take.

 

I think this works quite nicely, and Id prefer they kept the post dot on until range 0, and maybe make it flicker (bright/dark) a little, as if light is bouncing off the target, like glare.

Spotting planes at a distance is fairly easy now. But spotting them within that 1½-2km range is very very hard, I find.

 

The more MSAA/PD (Pixel Density for VR) is added to this, the harder it becomes to spot, cause it blends with the surroundings. Well not sure about the post dot, since its post, but in VR, MSAA and PD has a huge effect on it. Less is better for spotting there.

- Jack of many DCS modules, master of none.

- Personal wishlist: F-15A, F-4S Phantom II, JAS 39A Gripen, SAAB 35 Draken, F-104 Starfighter, Panavia Tornado IDS.

 

| MSI Z87-G45 Gaming | i5-4670K @ 4.3Ghz | 32Gb DDR3 1600 | Asus GTX 1070 Strix OC | Samsung 850 Evo 250 & 500Gb | 40" Sony FullHD | Oculus Rift CV1 | Thrustmaster Warthog Stick (19.5cm extension) & Throttle | MFG Crosswind | Windows 10 |

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...