crazyeddie Posted April 29, 2017 Share Posted April 29, 2017 If there are any psd texture files for this beauty it would be useful to have them before we start making skins, it saves so much time trying to create workable templates to start from. This model has a lot of texture files and that is a heap of work that might already be done. I'm only at home for a few days and I would love to make a start on some skins. Link to comment Share on other sites More sharing options...
Hawkeye60 Posted April 29, 2017 Author Share Posted April 29, 2017 If there are any psd texture files for this beauty it would be useful to have them before we start making skins, it saves so much time trying to create workable templates to start from. This model has a lot of texture files and that is a heap of work that might already be done. I'm only at home for a few days and I would love to make a start on some skins I do not have these. upuaut sent me this mod a while back so I could work on the FM and engine. There was no psd files included. You will need to ask him. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
crazyeddie Posted April 29, 2017 Share Posted April 29, 2017 Okay, thanks Hawkeye. The Bell aircraft was quite different to the Westlands produced version, different engines and exhausts, radio fit, aerials, much larger bubble and the pilot sat on the other side, so its never going to be right, but I should be able to make a decent job of a Westlands Sioux AH1. Link to comment Share on other sites More sharing options...
Cibit Posted April 29, 2017 Share Posted April 29, 2017 That will be a welcome addition Eddie, glad you got your winzip fixed:) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
assafm25 Posted April 29, 2017 Share Posted April 29, 2017 Any one put is hands on flight manual for this bird? [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
crazyeddie Posted April 29, 2017 Share Posted April 29, 2017 The line for the liveries is missing in the lua, just add the highlighted line as indicated and they will show up. --mounting 3d model paths and texture paths mount_vfs_model_path (current_mod_path.."/Shapes") mount_vfs_texture_path (current_mod_path.."/Textures/bell47g.ZIP") mount_vfs_liveries_path (current_mod_path.."/Liveries") Bell47_2 = { Link to comment Share on other sites More sharing options...
Dingo_Bob Posted April 29, 2017 Share Posted April 29, 2017 Suggest a Mod could maybe merge the two threads there's a bit of cross over and repetition now between the two https://forums.eagle.ru/showthread.php?t=186497 [sIGPIC][/sIGPIC] Modules are like Pokemon you gotta catch 'em all :joystick::lol::pilotfly: AMD Ryzen7 3700x, G-Skills 32Gb RAM @ 3200Mhz, MSI GTX1080Ti, TM Warthog (20cm extension by Sahaj), MFG Crosswind Pedals, Oculus Rift, Track Ir5 Link to comment Share on other sites More sharing options...
Hawkeye60 Posted April 30, 2017 Author Share Posted April 30, 2017 Suggest a Mod could maybe merge the two threads there's a bit of cross over and repetition now between the twoThis is a good idea. We need to ask Eight Ball if he minds. If not, I will ask BigNewy to merge the two threads here. It would make more sense here as it has been released. Get Eight Ball's permission please and have him pm me. I will do the rest. Thanks "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Patersonski Posted April 30, 2017 Share Posted April 30, 2017 I guess this was a no-brainer, but if anyone wants to change the music on the Bell 47 opening screen and mission editor to the MASH theme, here you go: https://www.dropbox.com/sh/lw1xkainc7j2um0/AAD1oxZd9hIEoGwbp8FehiG-a?dl=0 Rig: i7-6850K, Sapphire 6900XT, 32GB RAM, Asus X99-Pro board. Gear: VPC WarBRD/MongoosT-50 Stick, VPC MongoosMT-50 Throttle, VKB T-Rudders Mk.IV Pedals, HP Reverb G2. Link to comment Share on other sites More sharing options...
Hawkeye60 Posted April 30, 2017 Author Share Posted April 30, 2017 I guess this was a no-brainer, but if anyone wants to change the music on the Bell 47 opening screen and mission editor to the MASH theme, here you go: Nice addition! Thanks! "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Hawkeye60 Posted May 1, 2017 Author Share Posted May 1, 2017 Eddie's new Liveries, Coming soon! "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Yurgon Posted May 1, 2017 Share Posted May 1, 2017 (edited) Already posted the following in the Teaser-thread, in case anyone has trouble downloading the mod because of bandwidth restrictions: Upuaut allowed me to mirror the mod files. Edit: Upuauts Dropbox should have long recovered; also my mirror is potentially outdated. Link removed. /Edit Edited July 2, 2017 by Yurgon Mirror removed Link to comment Share on other sites More sharing options...
crazyeddie Posted May 1, 2017 Share Posted May 1, 2017 Some small changes to the skinpack being worked on, the UK stretcher version needs a few additions to remove the US MASH markings. There will be a training version and an RAF Metal Flying School version once I get the metals sorted out. 1 Link to comment Share on other sites More sharing options...
assafm25 Posted May 1, 2017 Share Posted May 1, 2017 any way to get the file for skinning? [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
assafm25 Posted May 2, 2017 Share Posted May 2, 2017 (edited) Since its not BS Model and not BELL Licences Model i found the right to remove the BITMAP from the GUI . just go to folder C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\J_MODS\Bell-47\Mods\aircraft\Bell47_2\Skins\1\ME and rename the 3 Files : Bell red+dark.png MainMenulogo.png MainMenulogoComp.png Also i make a new GUI Screen i hope u like it Also change the loading IMG Jest Replace the Skin Folder In the main Bell-48 Folder https://www.dropbox.com/s/g5io2gp3s6f7ys4/Skins.rar?dl=0 BTW Way ED not Make it one Thread ? Edited May 2, 2017 by assafm25 [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
Harm Posted May 2, 2017 Share Posted May 2, 2017 Hey, Hawkeye can you add assafm's changes to the next update? Link to comment Share on other sites More sharing options...
Hawkeye60 Posted May 2, 2017 Author Share Posted May 2, 2017 Hey, Hawkeye can you add assafm's changes to the next update? Yes! We have sent a request to upuaut for permission to modify his aircraft and release it. Awaiting a reply.............. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
assafm25 Posted May 2, 2017 Share Posted May 2, 2017 Its sound great to be part of this community project :). I will tray to add some transporent to the Bell-47 logo [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
assafm25 Posted May 2, 2017 Share Posted May 2, 2017 Hi All , Add Some Change to the GUI Also change the loading IMG Mission will be create next [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
crazyeddie Posted May 3, 2017 Share Posted May 3, 2017 Keep a weather eye on the DCS Download site, there should be some new skins there in a day or two, Including two blank skins for all you budding skinners to go loopy with !!! Link to comment Share on other sites More sharing options...
Hawkeye60 Posted May 4, 2017 Author Share Posted May 4, 2017 Skin pack is posted! User down load page. Thank you Eddie! Great job as usual. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
LuseKofte Posted May 4, 2017 Share Posted May 4, 2017 Thank you, not being a pilot , but quite accomplished DCS heli poilot i find the FM quite adequate. Have enjoyed it for a bit. Many thanks for your work Link to comment Share on other sites More sharing options...
wash_hoban Posted May 4, 2017 Share Posted May 4, 2017 many thanks for doing this great mod Still rockin Windows 7 64bit Link to comment Share on other sites More sharing options...
ObiWanVA10 Posted May 5, 2017 Share Posted May 5, 2017 Just lovely........at the risk of sounding ungrateful....we need a nice Korean/MASH mission. Any MP servers with this mod currently???? Link to comment Share on other sites More sharing options...
Hawkeye60 Posted May 5, 2017 Author Share Posted May 5, 2017 Some pics of the new liveries from Eddie! 1 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Recommended Posts