Zimmerdylan Posted May 26, 2017 Share Posted May 26, 2017 Thanks guys! If I understand correctly, you can only do one at a time? So do it for the map, and after the map is downloaded, I do the assets pack? Link to comment Share on other sites More sharing options...
assafm25 Posted May 26, 2017 Share Posted May 26, 2017 i found that on the Mission editor u need to select - create New mission then select the Map U like to use [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
assafm25 Posted May 26, 2017 Share Posted May 26, 2017 BTW the sim crush to me all the time on Normandi map [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 If any of you do not see either Normandy or WW2 Asset pack or both in MM, please, post the dcs.log right after running the MM and no seeing the modules. We need these log! Thanks. Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
WolfK33 Posted May 26, 2017 Share Posted May 26, 2017 If any of you do not see either Normandy or WW2 Asset pack or both in MM, please, post the dcs.log right after running the MM and no seeing the modules. We need these log! Thanks. dcs.log attacheddcslog.zip Link to comment Share on other sites More sharing options...
Maulkin Posted May 26, 2017 Share Posted May 26, 2017 Updated but how do I get the module manager to download? I managed to get the DCS Alpha to update to 2.1.0.5677 but when I go to the module manager I am not getting the prompt to install the modules. What should I do? --Maulkin Windows 10 64-bit - AMD Ryzen 9 5900X @ 3.7 GHz - 32 GB DDR4 3600MHz RAM - EVGA FTW3 RTX 3080 - Asus Crosshair VIII Hero motherboard - Samsung EVO Pro 1 TB SSD - TrackIR 4 Pro - Thrustmaster Warthog - Saitek rudder pedals - Lilliput UM-80/C with TM Cougars Link to comment Share on other sites More sharing options...
rogonaut Posted May 26, 2017 Share Posted May 26, 2017 DCS/1.5.6.5199.291 WWII-ARMOUR only in DCS 2.1 at the moment but im installing in to 2.1? via skates gui. i dont get it Link to comment Share on other sites More sharing options...
Zimmerdylan Posted May 26, 2017 Share Posted May 26, 2017 Probably read any one of the several threads already posted about the problem. All solutions are there. https://forums.eagle.ru/showthread.php?t=187908 Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 and attach dcs.log file if you don't see the modules in the MM, thanks. Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 but im installing in to 2.1? via skates gui. i dont get it from your log INFO : cmdline: "C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\bin\DCS_updater.exe" --apply install CA WWII-ARMOUR NEVADA_terrain NORMANDY_terrain STATUS: Initializing... INFO : basedir: C:\Program Files\Eagle Dynamics\DCS World see the basedir? EDIT: you are running the updater from openalpha, but your working dir is dcsw1, thus the results... Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 dcs.log attached Thanks. Strange log, no errors, but no Normady either... At least we should improve logging then :/ Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
splash Posted May 26, 2017 Share Posted May 26, 2017 Same problem here (no Normandy nor Assets pack in MM) but downloading with command line. Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 Same problem here (no Normandy nor Assets pack in MM) but downloading with command line. dcs.log would be nice to have. thanks Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
WolfK33 Posted May 26, 2017 Share Posted May 26, 2017 Thanks. Strange log, no errors, but no Normady either... At least we should improve logging then :/ You´re welcome. Anything else I can provide or do to help ? Link to comment Share on other sites More sharing options...
ED Team c0ff Posted May 26, 2017 ED Team Share Posted May 26, 2017 You´re welcome. Anything else I can provide or do to help ? I'll PM you now. Dmitry S. Baikov @ Eagle Dynamics LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2. Link to comment Share on other sites More sharing options...
slowhand Posted May 26, 2017 Share Posted May 26, 2017 I still don't see the new maps in MM here are my logsLogs.zip [sIGPIC][/sIGPIC] SMOKE'M:smoke: IF YA GOT'M!:gun_rifle: H2o Cooler I7 9700k GA 390x MB Win 10 pro Evga RTX 2070 8Gig DD5 32 Gig Corsair Vengence, 2T SSD. TM.Warthog:joystick: :punk:, CV-1:matrix:,3x23" monitors, Tm MFD's, Saitek pro rudders wrapped up in 2 sheets of plywood:megalol: Link to comment Share on other sites More sharing options...
rogonaut Posted May 26, 2017 Share Posted May 26, 2017 from your log INFO : cmdline: "C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\bin\DCS_updater.exe" --apply install CA WWII-ARMOUR NEVADA_terrain NORMANDY_terrain STATUS: Initializing... INFO : basedir: C:\Program Files\Eagle Dynamics\DCS World see the basedir? EDIT: you are running the updater from openalpha, but your working dir is dcsw1, thus the results... i just verified my dcs install locations in gui and put the guis exe in dcs 1.5 as stated and chose open alpha for the installs to take place in.. did i miss something? @fastfreddie that workes thx Link to comment Share on other sites More sharing options...
Maulkin Posted May 26, 2017 Share Posted May 26, 2017 and attach dcs.log file if you don't see the modules in the MM, thanks. Attached logdcs.log.zip --Maulkin Windows 10 64-bit - AMD Ryzen 9 5900X @ 3.7 GHz - 32 GB DDR4 3600MHz RAM - EVGA FTW3 RTX 3080 - Asus Crosshair VIII Hero motherboard - Samsung EVO Pro 1 TB SSD - TrackIR 4 Pro - Thrustmaster Warthog - Saitek rudder pedals - Lilliput UM-80/C with TM Cougars Link to comment Share on other sites More sharing options...
splash Posted May 26, 2017 Share Posted May 26, 2017 dcs.log would be nice to have. thanks Please, find it attached.dcs.zip Link to comment Share on other sites More sharing options...
Beaver McFanny Posted May 26, 2017 Share Posted May 26, 2017 (edited) Same situation here. Not showing in MM. Have tried running Powershell. Order No. 424660..dcs.zip Edited May 26, 2017 by Beaver McFanny Sent incorrect log Asus Maximus VII Gene/i5 4690K @4.6Ghz/EVGA GTX 1080 Classified watercooled/16Gb Corsair Vengeance Pro 2133Mhz/2 x Corsair 128Gb ssd in Raid 0/1 x OCZ Revodrive 3 x2 480Gb/1 x Seagate Barracuda 2 Tb hd and 1 x WD Caviar 600 Gb hd/EVGA Gold 750w psu/Corsair H80i cpu cooler/Windows 10 Pro 64-bit/Corsair 500R case/Corsair K95 keyboard/Logitech MX Master wireless mouse/Thrustmaster Hotas Warthog #41581/VKB T-Rudder MK2 pedals/TrackIR 5/Samsung 49" 4K 3D Screen/Samsung sound bar and sub. Link to comment Share on other sites More sharing options...
Azazel Posted May 26, 2017 Share Posted May 26, 2017 This fixed it for me, ED should probably make it a sticky or something = less digging required for others. Originally Posted by BIGNEWY View Post guide here https://forums.eagle.ru/showthread.php?t=114030 go into your Eagle Dynamics/DCS World/bin folder. There, hold Left Shift and right click and click "Open Command window here." (NOTE: the new windows 10 has moved to powershell, in powershell type cmd ) then one at a time use DCS_updater.exe install NORMANDY_terrain DCS_updater.exe install WWII-ARMOUR Actually, it will be more efficient to do Code: DCS_updater.exe install NORMANDY_terrain WWII-ARMOUR 1 My Rig: EVGA GTX 1070 x 2 | EVGA x58 SLI classified | i7 X 990 CPU | 24 GB RAM | Windows 10 Home 64 bit| Track IR Pro | CH Fighter Stick | CH Throttle | CH Pro Pedals | [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Baldawg Posted May 26, 2017 Share Posted May 26, 2017 not seeing asset pack ticket in place on DCS support logs included. including here as well. Load time for NTTR on any instant action a10c mission is 10 minutes running on SSD that is only half full.dcs.txt Win 10 Pro - Intel I7 12700k@4.9ghz water cooled - ASUS TUF Z690 -EVGA RTX 3080 12G Hybrid - EVGA 1000W PSU - 32GB 3200 G-Skill XMP- Reverb G2 -Custom mip and side panels - Leo Bodnar BBI32x2, BBI64x4 - TM Warthog HOTAS - TM Cougar MFD's x 3 - TM TPR pedals Link to comment Share on other sites More sharing options...
razalom Posted May 26, 2017 Share Posted May 26, 2017 (edited) Anyone have any idea why my DCS wont just update itself to 2.1 as its stuck on 2.0.5? Any ideas? I tried running the updater via command prompt and still no update either. Cant even get to 2.1 yet :( EDIT : Seems like I had to run the repair before it would update. Edited May 26, 2017 by razalom Link to comment Share on other sites More sharing options...
Raven (Elysian Angel) Posted May 26, 2017 Share Posted May 26, 2017 (edited) Same problem here. Order number 414581 (Normandy map) Order number 424036 (Asset pack) DCS.log : https://drive.google.com/open?id=0B6BgO-FIu4iTTlB6Z05vanE4UWc *edit* This fixed it for me Yes that seems to work, thanks! Edited May 26, 2017 by Elysian Angel Spoiler Ryzen 9 5900X | 64GB G.Skill TridentZ 3600 | Gigabyte RX6900XT | ASUS ROG Strix X570-E GAMING | Samsung 990Pro 2TB + 960Pro 1TB NMVe | HP Reverb G2 Pro Flight Trainer Puma | VIRPIL MT-50CM2+3 base / CM2 x2 grip with 200 mm S-curve extension + CM3 throttle + CP2/3 + FSSB R3L + VPC Rotor TCS Plus base with SharKa-50 grip mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS "HIGH" preset Link to comment Share on other sites More sharing options...
Basco1 Posted May 26, 2017 Share Posted May 26, 2017 This fixed it for me, ED should probably make it a sticky or something = less digging required for others. Originally Posted by BIGNEWY View Post guide here https://forums.eagle.ru/showthread.php?t=114030 go into your Eagle Dynamics/DCS World/bin folder. There, hold Left Shift and right click and click "Open Command window here." (NOTE: the new windows 10 has moved to powershell, in powershell type cmd ) then one at a time use DCS_updater.exe install NORMANDY_terrain DCS_updater.exe install WWII-ARMOUR Actually, it will be more efficient to do Code: DCS_updater.exe install NORMANDY_terrain WWII-ARMOUR No,this doesn't work for me,and I have used the updater in the past,mind you the original command window has now gone and I now have a utility called 'open Powershell window here' presumably the same thing but it doesn't work,not on my rig anyway. Off to bed now,have waited around too long downloading to 2.1 to wait around trying to get the Normandy map and WW2 assets pack to show up in the module manager. I can't say I'm over impressed with the situation,will see if anything has changed tomorrow. Chillblast Fusion Cirrus 2 FS Pc/Intel Core i7-7700K Kaby Lake CPU/Gigabyte Nvidia GTX 1070 G1 8GB/Seagate 2TB FireCuda SSHD/16GB DDR4 2133MHz Memory/Asus STRIX Z270F Gaming Motherboard/Corsair Hydro Series H80i GT Liquid Cooler/TM Warthog with MFG 10cm Extension/WINWING Orion Rudder Pedals (With Damper Edition)/TrackiR5/Windows 11 Home Link to comment Share on other sites More sharing options...
Recommended Posts