HC_Official Posted November 26, 2021 Share Posted November 26, 2021 this could maybe be a bug in the moose lua file causing this problem Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
jubuttib Posted November 27, 2021 Share Posted November 27, 2021 Right, made some findings today. I got the Mi-8's ADF to see a pilot, but after a while of looking where the ADF was pointing and where the pilot actually was via GPS and F10 map, the ADF was pointing 90 degrees off of where it should have been. I finally managed to find the pilot without the GPS by going perpendicular to the ADF's guidance. I'm almost certain that this is what happened with our Huey escapade before, that too seems to have been about 90 degrees off. Link to comment Share on other sites More sharing options...
jubuttib Posted November 27, 2021 Share Posted November 27, 2021 (edited) I also tested other NDBs on the Marianas in another mission, and those were working great, so seems like something is up with specifically the pilots, or at least SOME of the pilots. Remembering that the 1st trial from my previous post was a success, unless I was actually tuned to something else and just got lucky... IIRC the frequency was supposed to be 210 kHz, and I had to tune down to more like 203-204 kHz to get a signal... Edited November 27, 2021 by jubuttib Link to comment Share on other sites More sharing options...
jubuttib Posted November 28, 2021 Share Posted November 28, 2021 Did some night flying on the #1 server running Caucasus, and the ADF was spot on with the Hip there, working perfectly. So far only had issues on the #2 PG server, need to try #3 at some point. Link to comment Share on other sites More sharing options...
HC_Official Posted December 29, 2021 Share Posted December 29, 2021 Currently we are testing out the plash damage script, if you see or find out anything weird can you guys report back please Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Kang Posted December 29, 2021 Share Posted December 29, 2021 Funny you should mention that... There have been plenty of messages popping up saying '[Weapon name here] missing from Splash Damage script' whenever one is fired for a variety of missiles, bombs and AAA shells. Link to comment Share on other sites More sharing options...
HC_Official Posted December 29, 2021 Share Posted December 29, 2021 Thanks I just checked the script and there is a mistake in it I have just fixed Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Kang Posted December 31, 2021 Share Posted December 31, 2021 Thanks! Seems fixed now. Not a big deal, but it did get a little annoying. Link to comment Share on other sites More sharing options...
Catweedle Posted January 15, 2022 Share Posted January 15, 2022 (edited) That last redundant script pretty much does nothing, at least not visually or damage wise from/for any Viper ordnance. Also, and that has been the case for a few months, so not related to that damage script: - Randomly but regularly: two impacts and craters from one bomb, e.g. JDAM/GBU. - Kills not being counted (score), especially on multi-kills from one weapon. Wiping out all mini-mission's units: score 0; happened yesterday, happens a lot in general. Cheers Edited January 15, 2022 by Catweedle Link to comment Share on other sites More sharing options...
HC_Official Posted January 17, 2022 Share Posted January 17, 2022 I might pull the damage script for a while and see how that goes UH-60L has been added to the server Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
HC_Official Posted March 5, 2022 Share Posted March 5, 2022 Some bug fixes on load outs done Fire fighting mission updated to use Big smoke and fire so they look a lot better now Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Catweedle Posted March 6, 2022 Share Posted March 6, 2022 Unfortunately, the ghost/double impacts are still an annoying thing. Kang and myself can confirm this does not only happen with ground but also with A2A ordnance, e.g. two explosions, and/or (small) poofy impact crater separated from actual "explosion" crater. It does not happen always, but it seems that at some stage, even without changing the airframe, it is persistent. Link to comment Share on other sites More sharing options...
HC_Official Posted March 6, 2022 Share Posted March 6, 2022 this is the splash damage script I think Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
HC_Official Posted March 18, 2022 Share Posted March 18, 2022 Servers updated with AH-64D release Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Kang Posted March 22, 2022 Share Posted March 22, 2022 It is somewhat hilarious when the server is rather full and a quick look into the list has everyone in the same type. Link to comment Share on other sites More sharing options...
Kang Posted April 11, 2022 Share Posted April 11, 2022 Seems to me that the sub-mission 'Armoured convoy enroute to Senaki' has gotten into a bit of a habit of not ending properly. Maybe the changed composition of the convoy makes the script trip somehow? Link to comment Share on other sites More sharing options...
HC_Official Posted April 11, 2022 Share Posted April 11, 2022 The awesome bug introduced 2 patches ago that is still unfixed is causing issues with lots of MOOSE scripts, mine included Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Kang Posted April 11, 2022 Share Posted April 11, 2022 Ah, I see. That explains that. Also that once in a while killed units are seemingly not counted. Link to comment Share on other sites More sharing options...
Catweedle Posted April 12, 2022 Share Posted April 12, 2022 8 hours ago, Kang said: That explains that. Also that once in a while killed units are seemingly not counted. Nope. Link to comment Share on other sites More sharing options...
Catweedle Posted April 16, 2022 Share Posted April 16, 2022 (edited) At least FARP Dallas and most likely also Rome don't rearm and repair, assets too far away -- looks like you moved FARP's but not the rest. Also: Trapped FT with new CSAR method -> only CSAR script registers success, but not the FT mission -> new missions do not spawn. Edit: Also FT guy sometimes does not spawn at all, only red inf and vehicles. Happened right now. Cheers. Edited April 16, 2022 by Catweedle Link to comment Share on other sites More sharing options...
HC_Official Posted April 17, 2022 Share Posted April 17, 2022 ah ok thanks will take a look at this Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Kang Posted July 30, 2022 Share Posted July 30, 2022 I'm having a bit of trouble connecting to this particular server today, always ends up freezing during the load screen. Could it be the somewhat unconventional update schedule this week has borked something here? Link to comment Share on other sites More sharing options...
Catweedle Posted July 31, 2022 Share Posted July 31, 2022 To be precise, it gets stuck at "Net Sim Post Start", or it freezes the game within minutes if you manage to get into one of the servers. Link to comment Share on other sites More sharing options...
HC_Official Posted August 1, 2022 Share Posted August 1, 2022 ok lads, I will take a look at this this evening Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Catweedle Posted August 13, 2022 Share Posted August 13, 2022 It's doing it again, stuck at Net Sim Post Start ... was fine yesterday evening. Link to comment Share on other sites More sharing options...
Recommended Posts