dc808 Posted December 7, 2017 Share Posted December 7, 2017 Downloaded the software and everything went well but I can not connect to the server. The installation video says to launch the app on your device. Change any settings necessary to connect to the server. Not sure what this means as the app is already on my desktop and I can't change any server settings. The six check marks are green and I can't get a connection. Any ideas on what I might be missing? 1 Link to comment Share on other sites More sharing options...
Koriel Posted December 7, 2017 Share Posted December 7, 2017 (edited) My problem is slightly different, see screenshots: Right MPCD shows in the right top corner, but the left one does also, and when I display both they get superimposed on each other. What do I need to do to change the left MPCD to the left corner? I have a 3440x1440 display. Edited December 7, 2017 by Koriel Link to comment Share on other sites More sharing options...
hansangb Posted December 7, 2017 Share Posted December 7, 2017 Splash, I'm new at this. Could you please post your monitor lua. DC See https://forums.eagle.ru/showpost.php?p=2616874&postcount=799 for step by step instruction. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
splash Posted December 7, 2017 Share Posted December 7, 2017 (edited) + 1 I'm lost how to export to a 2nd monitor. My lower monitor has lower res than my main. I got it working with the A10 years ago but I've lost my settings and forgot how to calculate It's no problem. Here it is my screen configuration in Windows 7. First monitor (number 3 for Windows) is 1920x1080, second (number 1) and third (number 2) one's are 800x600 and fourth (number 4) is 1920x1080. Combined resolution is (1920+800+800+1920) x (1080)= 5440x1080. You have to take into account the corners: LEFT_MFCD = { x = 1920+136; -- 1920 is just to the right of first monitor and 136 is to move it a little -- to the right because Cougar MFD is smaller than my 8 inches monitor (800x600). y = 1080-600+20; -- my second monitor is lower than first monitor because is smaller, so I have to move it down. -- 20 is for the frame. width = 530; -- size, you can play with values. height = 530; -- size } What's your secondary monitor screen size? Edited December 7, 2017 by splash Link to comment Share on other sites More sharing options...
splash Posted December 7, 2017 Share Posted December 7, 2017 Splash, Thank you. Now I'm not sure what to select in the Options, System, Monitors drop down menu. DC You have to choose "Monitor+2MFD+Monitor" Exactly what you write in: name = _('Monitor+2MFD+Monitor'); Description = 'Monitor+2MFD+Monitor' Link to comment Share on other sites More sharing options...
splash Posted December 7, 2017 Share Posted December 7, 2017 My problem is slightly different, see screenshots: Right MPCD shows in the right top corner, but the left one does also, and when I display both they get superimposed on each other. What do I need to do to change the left MPCD to the left corner? I have a 3440x1440 display. Probably you have to modify LEFT_MFCD x coordinate and put "0" if you want to have that MFD in the left upper corner of main screen. Link to comment Share on other sites More sharing options...
Koriel Posted December 7, 2017 Share Posted December 7, 2017 Probably you have to modify LEFT_MFCD x coordinate and put "0" if you want to have that MFD in the left upper corner of main screen. But what file do I need to edit? d:\DCS 1.5 OpenBeta\Config\MonitorSetup\ has a few lua files, but since I only use 1 monitor I would guess I need to use the 1Camera.lua and there is no option for for either MPCD. Link to comment Share on other sites More sharing options...
Novac-185th Posted December 7, 2017 Share Posted December 7, 2017 (edited) Can we export the MFDs to a 2nd screen like the A10? . Edited December 8, 2017 by Novac-185th Link to comment Share on other sites More sharing options...
hansangb Posted December 7, 2017 Share Posted December 7, 2017 But what file do I need to edit? d:\DCS 1.5 OpenBeta\Config\MonitorSetup\ has a few lua files, but since I only use 1 monitor I would guess I need to use the 1Camera.lua and there is no option for for either MPCD. It's all in the link I posted a few posts back. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
Novac-185th Posted December 8, 2017 Share Posted December 8, 2017 (edited) Can we export the MFDs to a 2nd screen like the A10? For those of you that are having an issue with exporting the 2 MFCDs. Here is a really easy way to do it. Just run the program and you can drag and drop the displays where you want them...it will automatically set up the game: https://bit-shift.com/a10vcserver/index.html I'm using the 64 bit version and it works perfectly. Allows you to just drag the displays where you want them. It works perfectly with the AV-8B Thanks. GreekBull. I used that program and it works in the A10. AV8B no joy. Someone mentioned you need to bind 2 spare key presses to get the MFD's active for this module? If so how? Edit. Thanks got it working found the bind commands in the keystroke menu Edited December 8, 2017 by Novac-185th Link to comment Share on other sites More sharing options...
Novac-185th Posted December 8, 2017 Share Posted December 8, 2017 (edited) Can we export the MFDs to a 2nd screen like the A10? It's no problem. Here it is my screen configuration in Windows 7. First monitor (number 3 for Windows) is 1920x1080, second (number 1) and third (number 2) one's are 800x600 and fourth (number 4) is 1920x1080. Combined resolution is (1920+800+800+1920) x (1080)= 5440x1080. You have to take into account the corners: LEFT_MFCD = { x = 1920+136; -- 1920 is just to the right of first monitor and 136 is to move it a little -- to the right because Cougar MFD is smaller than my 8 inches monitor (800x600). y = 1080-600+20; -- my second monitor is lower than first monitor because is smaller, so I have to move it down. -- 20 is for the frame. width = 530; -- size, you can play with values. height = 530; -- size } What's your secondary monitor screen size? Thanks Splash I got it working via a program suggested by Greekbull. It works out all of the calculations. Last piece of the puzzle was the key bindings to activate them. I'd like to say thanks very much for the in depth reply. I must try and learn this the original way though. Once again thanks. Edited December 8, 2017 by Novac-185th Link to comment Share on other sites More sharing options...
splash Posted December 8, 2017 Share Posted December 8, 2017 But what file do I need to edit? d:\DCS 1.5 OpenBeta\Config\MonitorSetup\ has a few lua files, but since I only use 1 monitor I would guess I need to use the 1Camera.lua and there is no option for for either MPCD. You can edit 1camera.lua in your installation folder (could be modified by some update) or copy the attached file in C:\Users\username\Saved Games\DCS.openbeta\Config\MonitorSetup (I added coordinates for LEFT MFCD). It will appear in menu as "1 Screen modified".1Camera_mod.lua 1 Link to comment Share on other sites More sharing options...
Koriel Posted December 8, 2017 Share Posted December 8, 2017 You can edit 1camera.lua in your installation folder (could be modified by some update) or copy the attached file in C:\Users\username\Saved Games\DCS.openbeta\Config\MonitorSetup (I added coordinates for LEFT MFCD). It will appear in menu as "1 Screen modified". Txs!.. working on getting the Harrier installed in 2.2, and will try this solution in there and 1.58! Link to comment Share on other sites More sharing options...
dc808 Posted December 8, 2017 Share Posted December 8, 2017 Splash and Greekbull, Thanks for the input, I have it working and really like it. DC Link to comment Share on other sites More sharing options...
Alpine1 Posted December 18, 2017 Share Posted December 18, 2017 Hey dc808,can you tell me how you 'connected to server?'I have the same problem,thanks. Link to comment Share on other sites More sharing options...
dc808 Posted December 18, 2017 Share Posted December 18, 2017 Alpine1, I could not "connect to the server" either. I reverted to modifying the Monitor Setup .lua file. DC Link to comment Share on other sites More sharing options...
Alpine1 Posted December 18, 2017 Share Posted December 18, 2017 ok,thanks. Link to comment Share on other sites More sharing options...
Gary Posted December 20, 2017 Share Posted December 20, 2017 Ok, I have my 3 monitors set up (by using the HSBMFD file option) and my additional screens are definately set up outside of my main window but they render the whole main screen until its just the DMT or MAV display (ie other displays are loaded over the cockpit as an example) My set up is a 1920x1080 main screen plus 2x 800x600 screens. I thought Razbam were working on removing the background from the MFD's being shown but reading through this thread I now think this may already possible and catered for? HSBMFD contents below: _ = function(p) return p; end; name = _('HSBMFD1'); Description = '3 Screens and L-R MultiMFD' Viewports = { Center = { x = 0; y = 0; width = 1920; height = 1080; viewDx = 0; viewDy = 0; aspect = 1.7; GUI= { x = 0; y = 0; width = 1920; height = 1080; } }, LEFT_MFCD = { x = 0; y = 1080; width = 800; height = 600; }, RIGHT_MFCD = { x = 1120; y = 1080; width = 800; height = 600; }, } UIMainView = Viewports.Center LEFT_MFCD = Viewports.LEFT_MFCD RIGHT_MFCD = Viewports.RIGHT_MFCD Regards, Gary I5 - 1TB SSHD, 256 SSD - Nvidia 1070 - 16gb ram - CV1 Link to comment Share on other sites More sharing options...
scrapple Posted December 21, 2017 Share Posted December 21, 2017 Thanks to everyone's hints and advice, I think I've got this working! If I recall from flying the A-10C several years ago, there was a way to make it so that the MFDs did not display in the cockpit, but only on your exported MFDs. This supposedly improved frame rates. Is that also possible for the Harrier MFCDs? Link to comment Share on other sites More sharing options...
hansangb Posted December 21, 2017 Share Posted December 21, 2017 Ok, I have my 3 monitors set up (by using the HSBMFD file option) and my additional screens are definately set up outside of my main window but they render the whole main screen until its just the DMT or MAV display (ie other displays are loaded over the cockpit as an example) My set up is a 1920x1080 main screen plus 2x 800x600 screens. I thought Razbam were working on removing the background from the MFD's being shown but reading through this thread I now think this may already possible and catered for? HSBMFD contents below: _ = function(p) return p; end; name = _('HSBMFD1'); Description = '3 Screens and L-R MultiMFD' Viewports = { Center = { x = 0; y = 0; width = 1920; height = 1080; viewDx = 0; viewDy = 0; aspect = 1.7; GUI= { x = 0; y = 0; width = 1920; height = 1080; } }, LEFT_MFCD = { x = 0; y = 1080; width = 800; height = 600; }, RIGHT_MFCD = { x = 1120; y = 1080; width = 800; height = 600; }, } UIMainView = Viewports.Center LEFT_MFCD = Viewports.LEFT_MFCD RIGHT_MFCD = Viewports.RIGHT_MFCD Regards, Gary Gary, Looks like there's been another change with the updates. Try UIMainView = GUI instead of UIMainView = Viewports.Center hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1 Link to comment Share on other sites More sharing options...
Gary Posted December 22, 2017 Share Posted December 22, 2017 Thanks for the suggestion - no joy though unfortunately. Before I carry on trying - is anyone able to confirm that exporting just the MFD data is possible? (rather than also showing the cockpit I mean) Regards, Gary I5 - 1TB SSHD, 256 SSD - Nvidia 1070 - 16gb ram - CV1 Link to comment Share on other sites More sharing options...
mkiii Posted December 22, 2017 Share Posted December 22, 2017 (edited) To turn off cockpit MFDs but still have them exported to other monitors:- Look in the file C:\Program Files\Eagle Dynamics\DCS World\Scripts\Aircrafts\_Common\Cockpit\ViewportHandling.lua for the Line (should be around line 81):- purposes = {render_purpose.GENERAL, And comment it out thus:- purposes = {--render_purpose.GENERAL, Don't forget that to export the displays, in addition to having the MFDs set up in the monitor config, you also need to enable keystrokes in-game to turn them on, unlike other aircraft (apart from the M2000). These keystrokes are not set up by default. I use a shifted command on the F-16 MFD gain button on each MFD to set this. Alternatively, something like ALT+z & Alt+x works ok. Edited December 23, 2017 by mkiii Link to comment Share on other sites More sharing options...
Pipe Posted December 26, 2017 Share Posted December 26, 2017 Oh ya baby!..going to get a 17" wide screen for my setup will have extra room for a third mfd ala hornet i7 4770k @ 4.5, asus z-87 pro, strix GTX 980ti directcu3oc, 32gb Kingston hyperX 2133, philips 40" 4k monitor, hotas cougar\warthog, track ir 5, Oculus Rift Link to comment Share on other sites More sharing options...
Pipe Posted December 27, 2017 Share Posted December 27, 2017 Hey quick question....on board gpu or dedicated for exporting, or does it matter? i7 4770k @ 4.5, asus z-87 pro, strix GTX 980ti directcu3oc, 32gb Kingston hyperX 2133, philips 40" 4k monitor, hotas cougar\warthog, track ir 5, Oculus Rift Link to comment Share on other sites More sharing options...
Sarge55 Posted December 27, 2017 Share Posted December 27, 2017 I use the ports on my dedicated, don't know if on-board would work. TBH, I never thought about that... Already have a second set of Cougar MFD's on the shelf waiting for CF-18,looking forward to it. [sIGPIC][/sIGPIC] i7 10700K OC 5.1GHZ / 500GB SSD & 1TB M:2 & 4TB HDD / MSI Gaming MB / GTX 1080 / 32GB RAM / Win 10 / TrackIR 4 Pro / CH Pedals / TM Warthog Link to comment Share on other sites More sharing options...
Recommended Posts