Al-Azraq Posted February 26, 2021 Share Posted February 26, 2021 (edited) 11 hours ago, VF2 Subsonic said: This brings to mind some of my map marker confusion. When my RIO has kid dooty and I need jesterd to fill in, how exacltll does it work? As in, what marker numbers are recognized as 1...2...3 and so on? Is just the lowest one on the map from ANYONE, "marker 1" and then the next highest "2" and so on" Thanks By default, it only recognises up to the map marker number 10 which is no issue... if you are on single player. But in multiplayer you will have more than 10 almost for sure because other players will have placed theirs and your map marker number will stack up to other's. The other day, my map marker number in Blue Flag was 29 so there was no way to tell Jester to pick that one. However, one Discord user (is that you, @hornblower793?) tried editing the sentence in Voice Attack to Map Marker [1...10] to Map Marker [1...30] and it worked so I will try that fix. Edited February 26, 2021 by Al-Azraq 2 i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2 Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3 Persian Gulf | Nevada | Normandy | The Channel | Syria Link to comment Share on other sites More sharing options...
hornblower793 Posted February 26, 2021 Share Posted February 26, 2021 38 minutes ago, Al-Azraq said: By default, it only recognises up to the map marker number 10 which is no issue... if you are on single player. But in multiplayer you will have more than 10 almost for sure because other players will have placed theirs and your map marker number will stack up to other's. The other day, my map marker number in Blue Flag was 29 so there was no way to tell Jester to pick that one. However, one Discord user (is that you, @hornblower793?) tried editing the sentence in Voice Attack to Map Marker [1...10] to Map Marker [1...30] and it worked so I will try that fix. Yes it is Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal Link to comment Share on other sites More sharing options...
Al-Azraq Posted February 27, 2021 Share Posted February 27, 2021 20 hours ago, hornblower793 said: Yes it is I can confirm it works! I tried in Hoggit first and Jester wasn't inputting any coordinate. Voiceattack detected the command, but Jester was doing nothing. My assigned map marker was 21 but it wasn't working with map marker 1 either. Then I tried single player and it worked great so the failure in Hoggit might be on my side. I'm quite new to the Tomcat and I could have missed something. i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2 Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3 Persian Gulf | Nevada | Normandy | The Channel | Syria Link to comment Share on other sites More sharing options...
Gumbie Posted February 27, 2021 Share Posted February 27, 2021 On 2/25/2021 at 10:43 AM, sniperpr1 said: Once again, I have the same problem and once again I don't know how to fix it: VAICOM is not recognizing any module. Here is the log file to see if you notice something here: VAICOM PRO logfile Plugin version 2.5.24.0 (release) License: PRO Executing automatic lua code installation. DCS World installation found: version 2.5 Using Regular install path for 2.5 Install path = C:\Program Files\Eagle Dynamics\DCS World Saved Games folder = C:\Users\Jose\Saved Games\DCS Unchanged: Export.lua Reset: VAICOMPRO.export.lua Reset: RadioCommandDialogsPanel.lua Reset: speech.lua Reset: common.lua Reset: TabSheetBar.lua Reset: gameMessages.lua 6/7 DCS-side files were updated. Using custom install path for 2.5 OpenBeta Install path = F:\DCS World OpenBeta Saved Games folder = C:\Users\Jose\Saved Games\DCS.openbeta Unchanged: Export.lua Reset: VAICOMPRO.export.lua Reset: RadioCommandDialogsPanel.lua Reset: speech.lua Reset: common.lua Reset: TabSheetBar.lua Reset: gameMessages.lua 6/7 DCS-side files were updated. DCS World version STEAM not found. Checking VA profile. Importing RIO extension pack... Done. Loading keywords database... Writing updates. Success. Loading F10 menu items... Success. Updating aliases.. Done. Adding 36 imported ATC aliases. Setting ATC Oliver Hazzard Perry class as recipient Oliver Hazzard Perry class 15801 Setting ATC Ticonderoga class as recipient Ticonderoga class 15802 Setting ATC Bandar-e-Jask as recipient Bandar-e-Jask 15803 Setting ATC Ras Al Khaimah Intl as recipient Ras Al Khaimah Intl 15805 Setting ATC Al Minhad AFB as recipient Al Minhad AFB 15807 Setting ATC Al Ain Intl as recipient Al Ain Intl 15809 Setting ATC Abu Musa Island as recipient Abu Musa Island 15811 Setting ATC Abu Dhabi Intl as recipient Abu Dhabi Intl 15813 Setting ATC Sas Al Nakheel as recipient Sas Al Nakheel 15815 Setting ATC Al Dhafra AFB as recipient Al Dhafra AFB 15817 Setting ATC Al-Bateen as recipient Al-Bateen 15819 Setting ATC Sir Abu Nuayr as recipient Sir Abu Nuayr 15821 Setting ATC Kish Intl as recipient Kish Intl 15823 Setting ATC Liwa AFB as recipient Liwa AFB 15825 Setting ATC Lar as recipient Lar 15827 Setting ATC Lavan Island as recipient Lavan Island 15829 Setting ATC Jiroft as recipient Jiroft 15831 Setting ATC Kerman as recipient Kerman 15833 Setting ATC Shiraz Intl as recipient Shiraz Intl 15835 Adding 0 imported menu commands. Building master keywords table... Success. Building kneeboard tables... Success. Building master labels table... Success. No new DCS modules to import. Adding themepack collections Chatter theme set to Default Adding chatter resources.. Default Resources added. Chatter initialized. Startup finished. Ready for commands. Had same issue come to find out it was a corrupt file in one of the folders and I did a whole new install from Srs Voice attack and Viacom just make sure you remove all files that are connected to these programs or you may likely run back into this issue. 13 hours ago, Al-Azraq said: I can confirm it works! I tried in Hoggit first and Jester wasn't inputting any coordinate. Voiceattack detected the command, but Jester was doing nothing. My assigned map marker was 21 but it wasn't working with map marker 1 either. Then I tried single player and it worked great so the failure in Hoggit might be on my side. I'm quite new to the Tomcat and I could have missed something. Make sure you always set the Config in Vaicom to OpenBeta you may in counter issues. Link to comment Share on other sites More sharing options...
thunderchicken02 Posted March 5, 2021 Share Posted March 5, 2021 Does anyone know if the A-10 module supports manual tuning of radios per the manual excerpt below? I tried searching and experimenting but no go. I'm trying to use VAICOM pro to manually tune the 3 radios on the A-1OC II (AM/FM/UHF). Link to comment Share on other sites More sharing options...
Screamer63 Posted March 5, 2021 Share Posted March 5, 2021 OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work??? I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered? What the Hell is going on is there some other way to get the Damm Config to open up What the HELL???? Here is my Startup Text.. 1:17:16.798 Startup finished. 1:17:16.788 Listening suspended 1:17:16.754 UNABLE TO ACCESS COMMAND. COMMAND NOT AVAILABLE (Chatter) 1:17:16.589 Chatter initialized. 1:17:16.589 Resources added. 1:17:16.587 Adding chatter resources.. Default 1:17:16.586 Chatter theme set to Default 1:17:16.584 Adding themepack collections 1:17:16.580 No new DCS modules to import. 1:17:16.579 Success. 1:17:16.579 Building master labels table... 1:17:16.578 Object reference not set to an instance of an object./n at VAICOM.Database.Aliases.BuildKneeboardAliasList() 1:17:16.576 Building kneeboard tables... 1:17:16.575 Building master keywords table... 1:17:16.574 Adding 0 imported menu commands. 1:17:16.574 Adding 0 imported ATC aliases. 1:17:16.572 Done. 1:17:16.571 Updating aliases.. 1:17:16.569 Loading F10 menu items... 1:17:16.569 Success. 1:17:16.555 Loading keywords database... 1:17:16.536 Done. 1:17:16.535 Importing RIO extension pack... 1:17:16.502 Checking VA profile. 1:17:16.413 6/7 DCS-side files were updated. 1:17:16.412 Reset: gameMessages.lua 1:17:16.412 Reset: TabSheetBar.lua 1:17:16.411 Reset: common.lua 1:17:16.410 Reset: speech.lua 1:17:16.409 Reset: RadioCommandDialogsPanel.lua 1:17:16.408 Reset: VAICOMPRO.export.lua 1:17:16.408 Unchanged: Export.lua 1:17:16.407 Saved Games folder = C:\Users\screa\Saved Games\DCS 1:17:16.407 Install path = i:\program files (x86)\steam\steamapps\common\DCSWorld 1:17:16.407 Using default Steam install path for STEAM 1:17:16.407 DCS World installation found: version STEAM 1:17:16.403 6/7 DCS-side files were updated. 1:17:16.400 Reset: gameMessages.lua 1:17:16.399 Reset: TabSheetBar.lua 1:17:16.399 Reset: common.lua 1:17:16.398 Reset: speech.lua 1:17:16.397 Reset: RadioCommandDialogsPanel.lua 1:17:16.396 Reset: VAICOMPRO.export.lua 1:17:16.396 Unchanged: Export.lua 1:17:16.395 Saved Games folder = C:\Users\screa\Saved Games\DCS.openbeta 1:17:16.395 Install path = I:\DCS World OpenBeta 1:17:16.395 Using Registry entry for 2.5 OpenBeta 1:17:16.395 DCS World installation found: version 2.5 OpenBeta 1:17:16.389 6/7 DCS-side files were updated. 1:17:16.378 Reset: gameMessages.lua 1:17:16.378 Reset: TabSheetBar.lua 1:17:16.377 Reset: common.lua 1:17:16.376 Reset: speech.lua 1:17:16.375 Reset: RadioCommandDialogsPanel.lua 1:17:16.374 Reset: VAICOMPRO.export.lua 1:17:16.373 Unchanged: Export.lua 1:17:16.373 Saved Games folder = C:\Users\screa\Saved Games\DCS 1:17:16.370 Install path = I:\DCS World OpenBeta 1:17:16.370 Using custom install path for 2.5 1:17:16.362 Executing automatic lua code installation. 1:17:16.134 License: PRO 1:17:16.133 Plugin version 2.5.24.0 (release) 1:17:15.858 Initializing.. 1:17:15.858 Press LCtrl+LAlt+C for config. 1:17:15.858 VAICOM PRO for DCS World. License: PRO 1:17:15.602 Plugin 'HCS Plugin v3.5.8 - (c) 2016-2020 HCS VoicePacks Ltd' initialized. 1:17:15.393 Plugin support enabled. Link to comment Share on other sites More sharing options...
Lt_Jaeger Posted March 5, 2021 Share Posted March 5, 2021 4 hours ago, thunderchicken02 said: Does anyone know if the A-10 module supports manual tuning of radios per the manual excerpt below? I tried searching and experimenting but no go. I'm trying to use VAICOM pro to manually tune the 3 radios on the A-1OC II (AM/FM/UHF). Yeap, did work for me, at least with 2 Radios. I'm not flying the A-10 and got only two radios set up for my F-14 Link to comment Share on other sites More sharing options...
Hoirtel Posted March 5, 2021 Share Posted March 5, 2021 1 hour ago, Screamer63 said: OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work??? I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered? What the Hell is going on is there some other way to get the Damm Config to open up What the HELL???? Here is my Startup Text.. 1:17:16.798 Startup finished. 1:17:16.788 Listening suspended 1:17:16.754 UNABLE TO ACCESS COMMAND. COMMAND NOT AVAILABLE (Chatter) 1:17:16.589 Chatter initialized. 1:17:16.589 Resources added. 1:17:16.587 Adding chatter resources.. Default 1:17:16.586 Chatter theme set to Default 1:17:16.584 Adding themepack collections 1:17:16.580 No new DCS modules to import. 1:17:16.579 Success. 1:17:16.579 Building master labels table... 1:17:16.578 Object reference not set to an instance of an object./n at VAICOM.Database.Aliases.BuildKneeboardAliasList() 1:17:16.576 Building kneeboard tables... 1:17:16.575 Building master keywords table... 1:17:16.574 Adding 0 imported menu commands. 1:17:16.574 Adding 0 imported ATC aliases. 1:17:16.572 Done. 1:17:16.571 Updating aliases.. 1:17:16.569 Loading F10 menu items... 1:17:16.569 Success. 1:17:16.555 Loading keywords database... 1:17:16.536 Done. 1:17:16.535 Importing RIO extension pack... 1:17:16.502 Checking VA profile. 1:17:16.413 6/7 DCS-side files were updated. 1:17:16.412 Reset: gameMessages.lua 1:17:16.412 Reset: TabSheetBar.lua 1:17:16.411 Reset: common.lua 1:17:16.410 Reset: speech.lua 1:17:16.409 Reset: RadioCommandDialogsPanel.lua 1:17:16.408 Reset: VAICOMPRO.export.lua 1:17:16.408 Unchanged: Export.lua 1:17:16.407 Saved Games folder = C:\Users\screa\Saved Games\DCS 1:17:16.407 Install path = i:\program files (x86)\steam\steamapps\common\DCSWorld 1:17:16.407 Using default Steam install path for STEAM 1:17:16.407 DCS World installation found: version STEAM 1:17:16.403 6/7 DCS-side files were updated. 1:17:16.400 Reset: gameMessages.lua 1:17:16.399 Reset: TabSheetBar.lua 1:17:16.399 Reset: common.lua 1:17:16.398 Reset: speech.lua 1:17:16.397 Reset: RadioCommandDialogsPanel.lua 1:17:16.396 Reset: VAICOMPRO.export.lua 1:17:16.396 Unchanged: Export.lua 1:17:16.395 Saved Games folder = C:\Users\screa\Saved Games\DCS.openbeta 1:17:16.395 Install path = I:\DCS World OpenBeta 1:17:16.395 Using Registry entry for 2.5 OpenBeta 1:17:16.395 DCS World installation found: version 2.5 OpenBeta 1:17:16.389 6/7 DCS-side files were updated. 1:17:16.378 Reset: gameMessages.lua 1:17:16.378 Reset: TabSheetBar.lua 1:17:16.377 Reset: common.lua 1:17:16.376 Reset: speech.lua 1:17:16.375 Reset: RadioCommandDialogsPanel.lua 1:17:16.374 Reset: VAICOMPRO.export.lua 1:17:16.373 Unchanged: Export.lua 1:17:16.373 Saved Games folder = C:\Users\screa\Saved Games\DCS 1:17:16.370 Install path = I:\DCS World OpenBeta 1:17:16.370 Using custom install path for 2.5 1:17:16.362 Executing automatic lua code installation. 1:17:16.134 License: PRO 1:17:16.133 Plugin version 2.5.24.0 (release) 1:17:15.858 Initializing.. 1:17:15.858 Press LCtrl+LAlt+C for config. 1:17:15.858 VAICOM PRO for DCS World. License: PRO 1:17:15.602 Plugin 'HCS Plugin v3.5.8 - (c) 2016-2020 HCS VoicePacks Ltd' initialized. 1:17:15.393 Plugin support enabled. There is two install paths there. One for steam and one for non steam. Can you still not open config when DCS is not running? Link to comment Share on other sites More sharing options...
hornblower793 Posted March 5, 2021 Share Posted March 5, 2021 2 hours ago, Screamer63 said: OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work??? I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered? What the Hell is going on is there some other way to get the Damm Config to open up What the HELL???? Do you run a multi-monitor setup? When you press LCtrl + LAlt + C does a second Vaicom window appear in the takbar - if so is this an empty white square or does it show the config window? If the latter then right click on it and select move from the menu that appears - this should allow you to use the arrow keys from your keyboard to bring it back on screen. 1 Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal Link to comment Share on other sites More sharing options...
thunderchicken02 Posted March 5, 2021 Share Posted March 5, 2021 Yeap, did work for me, at least with 2 Radios. I'm not flying the A-10 and got only two radios set up for my F-14I don't understand, I think that you're saying it worked on the Tomcat, but I asked if this works on the A-10? What are the commands? In the A-10 it doesn't work if you say "Select" then the radio frequency. Link to comment Share on other sites More sharing options...
sthompson Posted March 5, 2021 Share Posted March 5, 2021 6 hours ago, Screamer63 said: OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work??? You are using the LEFT Control and Alt keys? Sorry you are pissed off. Remember that most people helping out here are volunteer users just like you. 1 I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals Link to comment Share on other sites More sharing options...
Lt_Jaeger Posted March 5, 2021 Share Posted March 5, 2021 (edited) 4 hours ago, thunderchicken02 said: I don't understand, I think that you're saying it worked on the Tomcat, but I asked if this works on the A-10? What are the commands? In the A-10 it doesn't work if you say "Select" then the radio frequency. It worked on the A-10 (the new one - don't even know the designation but had to collect her ) but I tested only 2 of the 3 (?) Radios due to the fact that I have only 2 PTTs defined (What I need for the Tomcat) The command was "Select 2 5......" Edited March 5, 2021 by Lt_Jaeger 1 Link to comment Share on other sites More sharing options...
Screamer63 Posted March 6, 2021 Share Posted March 6, 2021 Thanks to all for the Help for some reason I had to boot in safe mode with networking and it worked .. Thanks Again time to go try my new toys 1 Link to comment Share on other sites More sharing options...
hornblower793 Posted March 6, 2021 Share Posted March 6, 2021 2 hours ago, Screamer63 said: Thanks to all for the Help for some reason I had to boot in safe mode with networking and it worked .. Thanks Again time to go try my new toys Good to know, and will lodge that possible solution in the brain as this issue seems to come up regularly 1 Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal Link to comment Share on other sites More sharing options...
Starboy Posted March 6, 2021 Share Posted March 6, 2021 Hi, I ve just bought the bundle. I have an issue with the Kneeboard ... it appears, but I cannot switch between the different tabs ... After looking on the internet, I saw that I had to use voice command to switch tab ... but it doesn t work ... in voice attack , I have no command "Show Notes" and so on ... I activated the kneeboard with the key, it worked. In the configurator, I see "Show Notes" in the "Editor" tab of the configurator. I clicked on finish and apply ... but still not working in voice attack and still not see any commands for kneeboard in voice attack command list .... What did I do wrong ? Thanks for your answers Link to comment Share on other sites More sharing options...
Hoirtel Posted March 6, 2021 Share Posted March 6, 2021 21 minutes ago, Starboy said: Hi, I ve just bought the bundle. I have an issue with the Kneeboard ... it appears, but I cannot switch between the different tabs ... After looking on the internet, I saw that I had to use voice command to switch tab ... but it doesn t work ... in voice attack , I have no command "Show Notes" and so on ... I activated the kneeboard with the key, it worked. In the configurator, I see "Show Notes" in the "Editor" tab of the configurator. I clicked on finish and apply ... but still not working in voice attack and still not see any commands for kneeboard in voice attack command list .... What did I do wrong ? Thanks for your answers I couldn't get this to work either. It's actually easy to bind buttons to do this (or any command) instead. I recommend that. Link to comment Share on other sites More sharing options...
Starboy Posted March 7, 2021 Share Posted March 7, 2021 12 hours ago, Hoirtel said: I couldn't get this to work either. It's actually easy to bind buttons to do this (or any command) instead. I recommend that. Yeah, a key press would be fine for me too ... but I don t know which command it is, to switch tab . On a Youtube video, I saw, it s in "Uncategorized" commands .... I don t have this section. Link to comment Share on other sites More sharing options...
Starboy Posted March 7, 2021 Share Posted March 7, 2021 I find the reason and the solution. With the Configurator, under tab "Editor", I exported the file (in a keyword.csv, and keyword.txt) .... and analyse the keywords.... at the line of the missing keywords (show notes, show log,), I noticed that it was one of my trigger of my own mission, instead of the kneeboard command. So the problem was : I checked the checkbox in the option "Import F10 menu", and so it replaces the good kneeboard commands with my mission items. So I went in Configurator -- Reset -- Reset Keywords. And now it works and I can find "Show Log" and "Show notes" 1 Link to comment Share on other sites More sharing options...
hornblower793 Posted March 7, 2021 Share Posted March 7, 2021 I find the reason and the solution. With the Configurator, under tab "Editor", I exported the file (in a keyword.csv, and keyword.txt) .... and analyse the keywords.... at the line of the missing keywords (show notes, show log,), I noticed that it was one of my trigger of my own mission, instead of the kneeboard command. So the problem was : I checked the checkbox in the option "Import F10 menu", and so it replaces the good kneeboard commands with my mission items. So I went in Configurator -- Reset -- Reset Keywords. And now it works and I can find "Show Log" and "Show notes"Thanks for letting us know and glad you got it workingSent from my SM-T835 using Tapatalk Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal Link to comment Share on other sites More sharing options...
Screamer63 Posted March 8, 2021 Share Posted March 8, 2021 (edited) Ok I finaly got Viacom pro working and my new modules in stalled and activated BUT for some reason I can't get the Kneeboard app to work it is Not showing ant info in the Screen and the Tab is Pink instead of Yellow not responding to any commands and it shows a battery load info screen?? see pics... Has anyone had this issue or have a Fix wierd stuff.. Edited March 8, 2021 by Screamer63 Link to comment Share on other sites More sharing options...
Weegie Posted March 8, 2021 Share Posted March 8, 2021 The second picture is the kneeboard Back plain, I had that a long time ago and can't remember how I fixed it, you can get that when you lose the kneeboard pages. It looks to me like it's a generic kneeboard problem and not Vaicom related but could be wrong. So can you bring up other kneeboard pages when you page forward or back on the knneboard (usually the square bracket keys) Are you seeing the same thing in all modules or just the A-10? That's not much help as such but perhaps it may just assist (a little) to try to narrow this down a bit first to see where the problem lies Link to comment Share on other sites More sharing options...
Al-Azraq Posted March 11, 2021 Share Posted March 11, 2021 Hi! When I issue the JESTER OPTIONS command this is the result: Is it normal? i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2 Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3 Persian Gulf | Nevada | Normandy | The Channel | Syria Link to comment Share on other sites More sharing options...
hornblower793 Posted March 11, 2021 Share Posted March 11, 2021 yes - that is the Vaicom version of the Heatblur Wheel (there is some technical reason why they cannot both work at the same time) 1 Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal Link to comment Share on other sites More sharing options...
VF31_Subsonic Posted March 12, 2021 Share Posted March 12, 2021 On 2/26/2021 at 2:25 AM, hornblower793 said: Yes, this is how it works as far as I know. For anyone who is interested, I changed my Map Markers command phrase (found in the Extensions category of the VA profile list from [1...10] to [1...30] and Jester happily selected waypoint 25 to a steerpoint so we could navigate to it. Sent from my SM-T835 using Tapatalk Thanks! VF-31 Tomcatters http://www.csg-1.com/ | Discord Link to comment Share on other sites More sharing options...
The LT Posted March 13, 2021 Share Posted March 13, 2021 Hello everyone, For some reason, my VAICOM creates a copy of folder hierarchy in "C:\Scripts\Aircrafts\_Common\Cockpit" which stays after closing VoiceAttack. I'd rather it didn't put temp files in root folders. Any fix for this? 1 My controls & seat Main controls: , BRD-N v4 Flightstick (Kreml C5 controller), TM Warthog Throttle (Kreml F3 controller), BRD-F2 Restyling Bf-109 Pedals w. damper, TrackIR5, Gametrix KW-908 (integrated into RAV4 seat) Stick grips: Thrustmaster Warthog Thrustmaster Cougar (x2) Thrustmaster F-16 FLCS BRD KG13 Standby controls: BRD-M2 Mi-8 Pedals (Ruddermaster controller) BRD-N v3 Flightstick w. exch. grip upgrade (Kreml C5 controller) Thrustmaster Cougar Throttle Pilot seat Link to comment Share on other sites More sharing options...
Recommended Posts