Jump to content

VAICOM PRO plugin for VoiceAttack


Hollywood_315

Recommended Posts

11 hours ago, VF2 Subsonic said:

This brings to mind some of my map marker confusion.  When my RIO has kid dooty and I need jesterd to fill in, how exacltll does it work?

As in, what marker numbers are recognized as 1...2...3 and so on? Is just the lowest one on the map from ANYONE, "marker 1" and then the next highest "2" and so on"

Thanks

 

By default, it only recognises up to the map marker number 10 which is no issue... if you are on single player. But in multiplayer you will have more than 10 almost for sure because other players will have placed theirs and your map marker number will stack up to other's. The other day, my map marker number in Blue Flag was 29 so there was no way to tell Jester to pick that one.

 

However, one Discord user (is that you, @hornblower793?) tried editing the sentence in Voice Attack to Map Marker [1...10] to Map Marker [1...30] and it worked so I will try that fix. 


Edited by Al-Azraq
  • Like 2

i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2

Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3

Persian Gulf | Nevada | Normandy | The Channel | Syria

Link to comment
Share on other sites

38 minutes ago, Al-Azraq said:

 

By default, it only recognises up to the map marker number 10 which is no issue... if you are on single player. But in multiplayer you will have more than 10 almost for sure because other players will have placed theirs and your map marker number will stack up to other's. The other day, my map marker number in Blue Flag was 29 so there was no way to tell Jester to pick that one.

 

However, one Discord user (is that you, @hornblower793?) tried editing the sentence in Voice Attack to Map Marker [1...10] to Map Marker [1...30] and it worked so I will try that fix. 

 

Yes it is

Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D  grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal

Link to comment
Share on other sites

20 hours ago, hornblower793 said:

Yes it is

I can confirm it works! I tried in Hoggit first and Jester wasn't inputting any coordinate. Voiceattack detected the command, but Jester was doing nothing. My assigned map marker was 21 but it wasn't working with map marker 1 either.

 

Then I tried single player and it worked great so the failure in Hoggit might be on my side. I'm quite new to the Tomcat and I could have missed something.

i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2

Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3

Persian Gulf | Nevada | Normandy | The Channel | Syria

Link to comment
Share on other sites

On 2/25/2021 at 10:43 AM, sniperpr1 said:

Once again, I have the same problem and once again I don't know how to fix it: VAICOM is not recognizing any module. Here is the log file to see if you notice something here:

 

 

VAICOM PRO logfile
Plugin version 2.5.24.0 (release)
License: PRO
Executing automatic lua code installation.
DCS World installation found: version 2.5
   Using Regular install path for 2.5
   Install path = C:\Program Files\Eagle Dynamics\DCS World
   Saved Games folder = C:\Users\Jose\Saved Games\DCS
   Unchanged: Export.lua
   Reset: VAICOMPRO.export.lua
   Reset: RadioCommandDialogsPanel.lua
   Reset: speech.lua
   Reset: common.lua
   Reset: TabSheetBar.lua
   Reset: gameMessages.lua
   6/7 DCS-side files were updated.
   Using custom install path for 2.5 OpenBeta
   Install path = F:\DCS World OpenBeta
   Saved Games folder = C:\Users\Jose\Saved Games\DCS.openbeta
   Unchanged: Export.lua
   Reset: VAICOMPRO.export.lua
   Reset: RadioCommandDialogsPanel.lua
   Reset: speech.lua
   Reset: common.lua
   Reset: TabSheetBar.lua
   Reset: gameMessages.lua
   6/7 DCS-side files were updated.
DCS World version STEAM not found.
Checking VA profile.
Importing RIO extension pack...
Done.
Loading keywords database...
Writing updates.
Success.
Loading F10 menu items...
Success.
Updating aliases..
Done.
Adding 36 imported ATC aliases.
Setting ATC Oliver Hazzard Perry class as recipient Oliver Hazzard Perry class 15801
Setting ATC Ticonderoga class as recipient Ticonderoga class 15802
Setting ATC Bandar-e-Jask as recipient Bandar-e-Jask 15803
Setting ATC Ras Al Khaimah Intl as recipient Ras Al Khaimah Intl 15805
Setting ATC Al Minhad AFB as recipient Al Minhad AFB 15807
Setting ATC Al Ain Intl as recipient Al Ain Intl 15809
Setting ATC Abu Musa Island as recipient Abu Musa Island 15811
Setting ATC Abu Dhabi Intl as recipient Abu Dhabi Intl 15813
Setting ATC Sas Al Nakheel as recipient Sas Al Nakheel 15815
Setting ATC Al Dhafra AFB as recipient Al Dhafra AFB 15817
Setting ATC Al-Bateen as recipient Al-Bateen 15819
Setting ATC Sir Abu Nuayr as recipient Sir Abu Nuayr 15821
Setting ATC Kish Intl as recipient Kish Intl 15823
Setting ATC Liwa AFB as recipient Liwa AFB 15825
Setting ATC Lar as recipient Lar 15827
Setting ATC Lavan Island as recipient Lavan Island 15829
Setting ATC Jiroft as recipient Jiroft 15831
Setting ATC Kerman as recipient Kerman 15833
Setting ATC Shiraz Intl as recipient Shiraz Intl 15835
Adding 0 imported menu commands.
Building master keywords table...
Success.
Building kneeboard tables...
Success.
Building master labels table...
Success.
No new DCS modules to import.
Adding themepack collections
Chatter theme set to Default
Adding chatter resources.. Default
Resources added. 
Chatter initialized. 
Startup finished.
Ready for commands.
 

Had same issue come to find out it was a corrupt file in one of the folders and I did a whole new install from Srs  Voice attack and Viacom  just make sure you remove all files that are connected to these programs or you may likely run back into this issue.    

13 hours ago, Al-Azraq said:

I can confirm it works! I tried in Hoggit first and Jester wasn't inputting any coordinate. Voiceattack detected the command, but Jester was doing nothing. My assigned map marker was 21 but it wasn't working with map marker 1 either.

 

Then I tried single player and it worked great so the failure in Hoggit might be on my side. I'm quite new to the Tomcat and I could have missed something.

Make sure you always set the Config in Vaicom to OpenBeta you may in counter issues.

Link to comment
Share on other sites

OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work???

I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered?

What the Hell is going on is there some other way to get the Damm Config to open up What the HELL????

 

Here is my Startup Text..

1:17:16.798 Startup finished.
1:17:16.788 Listening suspended
1:17:16.754 UNABLE TO ACCESS COMMAND. COMMAND NOT AVAILABLE (Chatter)
1:17:16.589 Chatter initialized.
1:17:16.589 Resources added.
1:17:16.587 Adding chatter resources.. Default
1:17:16.586 Chatter theme set to Default
1:17:16.584 Adding themepack collections
1:17:16.580 No new DCS modules to import.
1:17:16.579 Success.
1:17:16.579 Building master labels table...
1:17:16.578 Object reference not set to an instance of an object./n   at VAICOM.Database.Aliases.BuildKneeboardAliasList()
1:17:16.576 Building kneeboard tables...
1:17:16.575 Building master keywords table...
1:17:16.574 Adding 0 imported menu commands.
1:17:16.574 Adding 0 imported ATC aliases.
1:17:16.572 Done.
1:17:16.571 Updating aliases..
1:17:16.569 Loading F10 menu items...
1:17:16.569 Success.
1:17:16.555 Loading keywords database...
1:17:16.536 Done.
1:17:16.535 Importing RIO extension pack...
1:17:16.502 Checking VA profile.
1:17:16.413    6/7 DCS-side files were updated.
1:17:16.412    Reset: gameMessages.lua
1:17:16.412    Reset: TabSheetBar.lua
1:17:16.411    Reset: common.lua
1:17:16.410    Reset: speech.lua
1:17:16.409    Reset: RadioCommandDialogsPanel.lua
1:17:16.408    Reset: VAICOMPRO.export.lua
1:17:16.408    Unchanged: Export.lua
1:17:16.407    Saved Games folder = C:\Users\screa\Saved Games\DCS
1:17:16.407    Install path = i:\program files (x86)\steam\steamapps\common\DCSWorld
1:17:16.407    Using default Steam install path for STEAM
1:17:16.407 DCS World installation found: version STEAM
1:17:16.403    6/7 DCS-side files were updated.
1:17:16.400    Reset: gameMessages.lua
1:17:16.399    Reset: TabSheetBar.lua
1:17:16.399    Reset: common.lua
1:17:16.398    Reset: speech.lua
1:17:16.397    Reset: RadioCommandDialogsPanel.lua
1:17:16.396    Reset: VAICOMPRO.export.lua
1:17:16.396    Unchanged: Export.lua
1:17:16.395    Saved Games folder = C:\Users\screa\Saved Games\DCS.openbeta
1:17:16.395    Install path = I:\DCS World OpenBeta
1:17:16.395    Using Registry entry for 2.5 OpenBeta
1:17:16.395 DCS World installation found: version 2.5 OpenBeta
1:17:16.389    6/7 DCS-side files were updated.
1:17:16.378    Reset: gameMessages.lua
1:17:16.378    Reset: TabSheetBar.lua
1:17:16.377    Reset: common.lua
1:17:16.376    Reset: speech.lua
1:17:16.375    Reset: RadioCommandDialogsPanel.lua
1:17:16.374    Reset: VAICOMPRO.export.lua
1:17:16.373    Unchanged: Export.lua
1:17:16.373    Saved Games folder = C:\Users\screa\Saved Games\DCS
1:17:16.370    Install path = I:\DCS World OpenBeta
1:17:16.370    Using custom install path for 2.5
1:17:16.362 Executing automatic lua code installation.
1:17:16.134 License: PRO
1:17:16.133 Plugin version 2.5.24.0 (release)
1:17:15.858 Initializing..
1:17:15.858 Press LCtrl+LAlt+C for config.
1:17:15.858 VAICOM PRO for DCS World. License: PRO
1:17:15.602 Plugin 'HCS Plugin v3.5.8 - (c) 2016-2020 HCS VoicePacks Ltd' initialized.
1:17:15.393 Plugin support enabled.

 

 

Link to comment
Share on other sites

4 hours ago, thunderchicken02 said:

Does anyone know if the A-10 module supports manual tuning of radios per the manual excerpt below? I tried searching and experimenting but no go. I'm trying to use VAICOM pro to manually tune the 3 radios on the A-1OC II (AM/FM/UHF).

 

image.png

Yeap, did work for me, at least with 2 Radios. I'm not flying the A-10 and got only two radios set up for my F-14

Link to comment
Share on other sites

1 hour ago, Screamer63 said:

OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work???

I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered?

What the Hell is going on is there some other way to get the Damm Config to open up What the HELL????

 

Here is my Startup Text..

1:17:16.798 Startup finished.
1:17:16.788 Listening suspended
1:17:16.754 UNABLE TO ACCESS COMMAND. COMMAND NOT AVAILABLE (Chatter)
1:17:16.589 Chatter initialized.
1:17:16.589 Resources added.
1:17:16.587 Adding chatter resources.. Default
1:17:16.586 Chatter theme set to Default
1:17:16.584 Adding themepack collections
1:17:16.580 No new DCS modules to import.
1:17:16.579 Success.
1:17:16.579 Building master labels table...
1:17:16.578 Object reference not set to an instance of an object./n   at VAICOM.Database.Aliases.BuildKneeboardAliasList()
1:17:16.576 Building kneeboard tables...
1:17:16.575 Building master keywords table...
1:17:16.574 Adding 0 imported menu commands.
1:17:16.574 Adding 0 imported ATC aliases.
1:17:16.572 Done.
1:17:16.571 Updating aliases..
1:17:16.569 Loading F10 menu items...
1:17:16.569 Success.
1:17:16.555 Loading keywords database...
1:17:16.536 Done.
1:17:16.535 Importing RIO extension pack...
1:17:16.502 Checking VA profile.
1:17:16.413    6/7 DCS-side files were updated.
1:17:16.412    Reset: gameMessages.lua
1:17:16.412    Reset: TabSheetBar.lua
1:17:16.411    Reset: common.lua
1:17:16.410    Reset: speech.lua
1:17:16.409    Reset: RadioCommandDialogsPanel.lua
1:17:16.408    Reset: VAICOMPRO.export.lua
1:17:16.408    Unchanged: Export.lua
1:17:16.407    Saved Games folder = C:\Users\screa\Saved Games\DCS
1:17:16.407    Install path = i:\program files (x86)\steam\steamapps\common\DCSWorld
1:17:16.407    Using default Steam install path for STEAM
1:17:16.407 DCS World installation found: version STEAM
1:17:16.403    6/7 DCS-side files were updated.
1:17:16.400    Reset: gameMessages.lua
1:17:16.399    Reset: TabSheetBar.lua
1:17:16.399    Reset: common.lua
1:17:16.398    Reset: speech.lua
1:17:16.397    Reset: RadioCommandDialogsPanel.lua
1:17:16.396    Reset: VAICOMPRO.export.lua
1:17:16.396    Unchanged: Export.lua
1:17:16.395    Saved Games folder = C:\Users\screa\Saved Games\DCS.openbeta
1:17:16.395    Install path = I:\DCS World OpenBeta
1:17:16.395    Using Registry entry for 2.5 OpenBeta
1:17:16.395 DCS World installation found: version 2.5 OpenBeta
1:17:16.389    6/7 DCS-side files were updated.
1:17:16.378    Reset: gameMessages.lua
1:17:16.378    Reset: TabSheetBar.lua
1:17:16.377    Reset: common.lua
1:17:16.376    Reset: speech.lua
1:17:16.375    Reset: RadioCommandDialogsPanel.lua
1:17:16.374    Reset: VAICOMPRO.export.lua
1:17:16.373    Unchanged: Export.lua
1:17:16.373    Saved Games folder = C:\Users\screa\Saved Games\DCS
1:17:16.370    Install path = I:\DCS World OpenBeta
1:17:16.370    Using custom install path for 2.5
1:17:16.362 Executing automatic lua code installation.
1:17:16.134 License: PRO
1:17:16.133 Plugin version 2.5.24.0 (release)
1:17:15.858 Initializing..
1:17:15.858 Press LCtrl+LAlt+C for config.
1:17:15.858 VAICOM PRO for DCS World. License: PRO
1:17:15.602 Plugin 'HCS Plugin v3.5.8 - (c) 2016-2020 HCS VoicePacks Ltd' initialized.
1:17:15.393 Plugin support enabled.

 

 

There is two install paths there. One for steam and one for non steam. Can you still not open config when DCS is not running?

Link to comment
Share on other sites

2 hours ago, Screamer63 said:

OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work???

I can't open the the Damm Config to get my ATC and Kneeboard modules I bought installed and registered?

What the Hell is going on is there some other way to get the Damm Config to open up What the HELL????

 

 

 

 

Do you run a multi-monitor setup?

 

When you press LCtrl + LAlt + C does a second Vaicom window appear in the takbar - if so is this an empty white square or does it show the config window? If the latter then right click on it and select move from the menu that appears - this should allow you to use the arrow keys from your keyboard to bring it back on screen.

  • Like 1

Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D  grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal

Link to comment
Share on other sites

Yeap, did work for me, at least with 2 Radios. I'm not flying the A-10 and got only two radios set up for my F-14
I don't understand, I think that you're saying it worked on the Tomcat, but I asked if this works on the A-10?

What are the commands? In the A-10 it doesn't work if you say "Select" then the radio frequency.


Link to comment
Share on other sites

6 hours ago, Screamer63 said:

OK this is Really Pissing me off I can't get the CTRL ALT C Config command to work???

 

You are using the LEFT Control and Alt keys?

 

Sorry you are pissed off. Remember that most people helping out here are volunteer users just like you.

  • Like 1

I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals

Link to comment
Share on other sites

4 hours ago, thunderchicken02 said:

I don't understand, I think that you're saying it worked on the Tomcat, but I asked if this works on the A-10?

What are the commands? In the A-10 it doesn't work if you say "Select" then the radio frequency.

 

 

 

It worked on the A-10 (the new one - don't even know the designation but had to collect her 🙂but I tested only 2 of the 3 (?) Radios due to the fact that I have only 2 PTTs defined (What I need for the Tomcat) 

 

The command was "Select 2 5......" 

 


Edited by Lt_Jaeger
  • Like 1
Link to comment
Share on other sites

2 hours ago, Screamer63 said:

Thanks to all for the Help for some reason I had to boot in safe mode with networking and it worked ..

Thanks Again time to go try my new toys 🙂

 

Good to know, and will lodge that possible solution in the brain as this issue seems to come up regularly

  • Like 1

Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D  grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal

Link to comment
Share on other sites

Hi, 

 

I ve just bought the bundle. 

 

I have an issue with the Kneeboard ... it appears, but I cannot switch between the different tabs ... After looking on the internet, I saw that I had to use voice command to switch tab ... but it doesn t work ... in voice attack , I have no command "Show Notes" and so on ...

I activated the kneeboard with the key, it worked. 

In the configurator, I see "Show Notes"  in the "Editor" tab of the configurator.
I clicked on finish and apply ... but still not working in voice attack and still not see any commands for kneeboard in voice attack command list .... 

 

What did I do wrong ?

 

Thanks for your answers

Link to comment
Share on other sites

21 minutes ago, Starboy said:

Hi, 

 

I ve just bought the bundle. 

 

I have an issue with the Kneeboard ... it appears, but I cannot switch between the different tabs ... After looking on the internet, I saw that I had to use voice command to switch tab ... but it doesn t work ... in voice attack , I have no command "Show Notes" and so on ...

I activated the kneeboard with the key, it worked. 

In the configurator, I see "Show Notes"  in the "Editor" tab of the configurator.
I clicked on finish and apply ... but still not working in voice attack and still not see any commands for kneeboard in voice attack command list .... 

 

What did I do wrong ?

 

Thanks for your answers

I couldn't get this to work either. It's actually easy to bind buttons to do this (or any command) instead. I recommend that.

Link to comment
Share on other sites

12 hours ago, Hoirtel said:

I couldn't get this to work either. It's actually easy to bind buttons to do this (or any command) instead. I recommend that.

Yeah, a key press would be fine for me too ... but I don t know which command it is, to switch tab .

On a Youtube video, I saw, it s in "Uncategorized" commands .... I don t have this section.

Link to comment
Share on other sites

I find the reason and the solution.

 

With the Configurator, under tab "Editor", I exported the file (in a keyword.csv, and keyword.txt) .... and analyse the keywords.... at the line of the missing keywords (show notes, show log,), I noticed that it was one of my trigger of my own mission, instead of the kneeboard command.

So the problem was : I checked the checkbox in the option "Import F10 menu", and so it replaces the good kneeboard commands with my mission items. 

So I went in Configurator -- Reset -- Reset Keywords. 

 

And now it works and I can find "Show Log" and "Show notes"

  • Like 1
Link to comment
Share on other sites

I find the reason and the solution.
 
With the Configurator, under tab "Editor", I exported the file (in a keyword.csv, and keyword.txt) .... and analyse the keywords.... at the line of the missing keywords (show notes, show log,), I noticed that it was one of my trigger of my own mission, instead of the kneeboard command.

So the problem was : I checked the checkbox in the option "Import F10 menu", and so it replaces the good kneeboard commands with my mission items. 
So I went in Configurator -- Reset -- Reset Keywords. 
 
And now it works and I can find "Show Log" and "Show notes"
Thanks for letting us know and glad you got it working

Sent from my SM-T835 using Tapatalk

Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D  grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal

Link to comment
Share on other sites

Ok I finaly got Viacom pro working and my new modules in stalled and activated BUT for some reason I can't get the Kneeboard app to work it is

Not showing ant info in the Screen and the Tab is Pink instead of Yellow not responding to any commands and it shows a battery load info screen??

see pics... Has anyone had this issue or have a Fix wierd stuff.. 😞

 

Screen_210307_004148.jpg

Screen_210307_011205.jpg


Edited by Screamer63
Link to comment
Share on other sites

The second picture is the kneeboard Back plain, I had that a long time ago and can't remember how I fixed it, you can get that when you lose the kneeboard pages.

 

It looks to me like it's a generic kneeboard problem and not Vaicom related but could be wrong.

 

So can you bring up other kneeboard pages when you page forward or back on the knneboard (usually the square bracket keys)

 

Are you seeing the same thing in all modules or just the A-10?

 

That's not much help as such but perhaps it may just assist (a little) to try to narrow this down a bit first to see where the problem lies

Link to comment
Share on other sites

Hi! When I issue the JESTER OPTIONS command this is the result:

 

Screen_210311_111229.png

 

Is it normal?

i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2

Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3

Persian Gulf | Nevada | Normandy | The Channel | Syria

Link to comment
Share on other sites

yes - that is the Vaicom version of the Heatblur Wheel (there is some technical reason why they cannot both work at the same time)

  • Like 1

Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D  grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal

Link to comment
Share on other sites

On 2/26/2021 at 2:25 AM, hornblower793 said:

Yes, this is how it works as far as I know. For anyone who is interested, I changed my Map Markers command phrase (found in the Extensions category of the VA profile list from [1...10] to [1...30] and Jester happily selected waypoint 25 to a steerpoint so we could navigate to it.

Sent from my SM-T835 using Tapatalk
 

Thanks!

VF-31 Tomcatters

vf31-cat.jpg

http://www.csg-1.com/ | Discord

 

Link to comment
Share on other sites

Hello everyone,

 

For some reason, my VAICOM creates a copy of folder hierarchy in "C:\Scripts\Aircrafts\_Common\Cockpit" which stays after closing VoiceAttack. I'd rather it didn't put temp files in root folders. Any fix for this?

  • Like 1

My controls & seat

 

Main controls: , BRD-N v4 Flightstick (Kreml C5 controller), TM Warthog Throttle (Kreml F3 controller), BRD-F2 Restyling Bf-109 Pedals w. damper, TrackIR5, Gametrix KW-908 (integrated into RAV4 seat)

Stick grips:

Thrustmaster Warthog

Thrustmaster Cougar (x2)

Thrustmaster F-16 FLCS

BRD KG13

 

Standby controls:

BRD-M2 Mi-8 Pedals (Ruddermaster controller)

BRD-N v3 Flightstick w. exch. grip upgrade (Kreml C5 controller)

Thrustmaster Cougar Throttle

Pilot seat

 

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...