Jump to content

Engine dies after takeoff


kelpie

Recommended Posts

Ok, ignoring the not-so-great takeoff, After the second to last update to DCS 2.5 I can't keep the 109 flying for more than a minute or 2 before the engine suddenly stops. There's no warning, all the gauges seem to indicate that there's no problems. Suddenly the plane bounces, the engine goes dead, and then the coolant temp gauge suddenly jumps to just over the top arrow. It makes no sense to me and I've flown the 109 well for a month prior to the update and I am doing nothing different.

 

Can someone take a look at the track and tell me what I'm doing wrong or if there's a bug that is causing this?

 

I have no trouble at all with the 190 or the 51D. Just the 109.

 

Update: I noticed that something similar happens when going down the runway and the right rudder is pressed even slightly. The plane suddenly dips right and the engine stops with no way to restart it and no damage to be repaired when the ground crew is called.

bf109 engine failure.trk


Edited by kelpie

Modules:

Owned:

P-51D, F/A-18C, AJS-37, NTTR, F-5E, M-2000C, Bf 109, Fw 190 D-9, F-86F, Mig-15Bis, A-10C, Combined Arms, Mi-8Mtv2, UH-1H, Black Shark 2, Mig-21Bis, FC3, F-14A/B, Mig-19, Spitfire, JF-17, Persian Gulf

 

Would Like to See:

Mig-29K, Su-24, Mig-25, J-8II, J-10 , Tornado

 

__________________

Specifications:

Windows 10 64Bit, i7-7700K 4.2Ghz, GTX 1080, 16Gb RAM, T.flight Stick X

Link to comment
Share on other sites

I didn't watch the track, but, did you make sure you set the prop pitch governor to ON and the radiators to Open or Auto?

  • Like 1

Specs:

Asus Z97 PRO Gamer, i7 4790K@4.6GHz, 4x8GB Kingston @2400MHz 11-13-14-32, Titan X, Creative X-Fi, 128+2x250GB SSDs, VPC T50 Throttle + G940, MFG Crosswinds, TrackIR 5 w/ pro clip, JetSeat, Win10 Pro 64-bit, Oculus Rift, 27"@1920x1080

 

Settings:

2.1.x - Textures:High Terrain:High Civ.Traffic:Off Water:High VisRan:Low Heatblur:High Shadows:High Res:1920x1080 RoC:1024 MSAA:4x AF:16x HDR:OFF DefS: ON GCI: ON DoF:Off Lens: OFF C/G:390m Trees:1500m R:max Gamma: 1.5

 

Link to comment
Share on other sites

I didn't watch the track, but, did you make sure you set the prop pitch governor to ON and the radiators to Open or Auto?

 

The radiator was set to Auto but the pitch governor could very well be the problem. I'll need to test it out when I get back home. ;)

Modules:

Owned:

P-51D, F/A-18C, AJS-37, NTTR, F-5E, M-2000C, Bf 109, Fw 190 D-9, F-86F, Mig-15Bis, A-10C, Combined Arms, Mi-8Mtv2, UH-1H, Black Shark 2, Mig-21Bis, FC3, F-14A/B, Mig-19, Spitfire, JF-17, Persian Gulf

 

Would Like to See:

Mig-29K, Su-24, Mig-25, J-8II, J-10 , Tornado

 

__________________

Specifications:

Windows 10 64Bit, i7-7700K 4.2Ghz, GTX 1080, 16Gb RAM, T.flight Stick X

Link to comment
Share on other sites

The problem was definitely the governor switch. I had it set to manual instead of automatic. Well, case closed. :P

 

Thanks, amazingme. I probably wouldn't have caught it if you didn't mention it.

Modules:

Owned:

P-51D, F/A-18C, AJS-37, NTTR, F-5E, M-2000C, Bf 109, Fw 190 D-9, F-86F, Mig-15Bis, A-10C, Combined Arms, Mi-8Mtv2, UH-1H, Black Shark 2, Mig-21Bis, FC3, F-14A/B, Mig-19, Spitfire, JF-17, Persian Gulf

 

Would Like to See:

Mig-29K, Su-24, Mig-25, J-8II, J-10 , Tornado

 

__________________

Specifications:

Windows 10 64Bit, i7-7700K 4.2Ghz, GTX 1080, 16Gb RAM, T.flight Stick X

Link to comment
Share on other sites

After engine start-up it's good practice to check that the engine governor is working. When you rev up the engine, you should see the needle on the prop pitch indicator move. That's the instrument at the right of the dashboard with a clock-like dial, marked "Luftschraube/Stellungsanzeige"

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Link to comment
Share on other sites

The problem was definitely the governor switch. I had it set to manual instead of automatic. Well, case closed. :P

 

Thanks, amazingme. I probably wouldn't have caught it if you didn't mention it.

Glad to hear! :thumbup:

Specs:

Asus Z97 PRO Gamer, i7 4790K@4.6GHz, 4x8GB Kingston @2400MHz 11-13-14-32, Titan X, Creative X-Fi, 128+2x250GB SSDs, VPC T50 Throttle + G940, MFG Crosswinds, TrackIR 5 w/ pro clip, JetSeat, Win10 Pro 64-bit, Oculus Rift, 27"@1920x1080

 

Settings:

2.1.x - Textures:High Terrain:High Civ.Traffic:Off Water:High VisRan:Low Heatblur:High Shadows:High Res:1920x1080 RoC:1024 MSAA:4x AF:16x HDR:OFF DefS: ON GCI: ON DoF:Off Lens: OFF C/G:390m Trees:1500m R:max Gamma: 1.5

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...