Tinkickef Posted June 22, 2018 Posted June 22, 2018 (edited) First time ever I have had to say DCS is completely (Edit: partially) unplayable, but after the last update it now is. FPS must be around 4. The extent to this is that looking up at the moon and moving the head makes two moons appear. Downloaded the update Wednesday and first time I tried it is today, PC switched completely off between times. Windows update is disabled, so the problem is not one of their updates. Edited June 22, 2018 by Tinkickef System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
feefifofum Posted June 22, 2018 Posted June 22, 2018 Try deleting the fxo, metashaders, and metashaders2 directories from your /users/username/saved games/dcs.openbeta directory. THE GEORGIAN WAR - OFFICIAL F-15C DLC
Tinkickef Posted June 22, 2018 Author Posted June 22, 2018 Try deleting the fxo, metashaders, and metashaders2 directories from your /users/username/saved games/dcs.openbeta directory. thanks for the quick advice Fee. I will give it a go. That's when the nausea goes away :cry: System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
Tinkickef Posted June 22, 2018 Author Posted June 22, 2018 (edited) No Dice, still unplayable. Log enclosed. Tried deleting metashader2 folder again and running repair option, still the same. Shutting down in task manager, I noticed the game is using TWICE the RAM it normally does. Normally when game is idling and I shut down in task manager I see around 4GB RAM used. This time it was over 9GB.dcs.zip Edited June 22, 2018 by Tinkickef System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
feefifofum Posted June 22, 2018 Posted June 22, 2018 Sorry, I don't use VR so that's all I've got. If you need to revert to a previous version you can find a guide HERE THE GEORGIAN WAR - OFFICIAL F-15C DLC
Tinkickef Posted June 22, 2018 Author Posted June 22, 2018 Done some more testing. Problem is confined to Persian Gulf map. NTTR, Normandy and Caucasus work fine. However if you try PG first and get jitters, then back out onto one of the other maps, you get the jitters on them all. If you close back to desktop, then restart DCS, everything is fine. Happy days. Give the devs something to chew on. I will rethink my previous observation: DCS is partially unplayable. :) System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
Sniper175 Posted June 22, 2018 Posted June 22, 2018 same problem in vr, fix for me was go to f10 map zoom all the way in and all the way out let it fully load when doing so. No more stutters and low fps... I7-8700 @5GHZ, 32GB 3000MHZ RAM, 1080TI, Rift S, ODYSSEY +. SSD DRIVES, WIN10
Raven (Elysian Angel) Posted June 23, 2018 Posted June 23, 2018 same problem in vr, fix for me was go to f10 map zoom all the way in and all the way out let it fully load when doing so. No more stutters and low fps... I'll try that as well: fps has been quite horrible with Update 4 and 5 in VR indeed. Spoiler Ryzen 7 9800X3D | 96GB G.Skill RipjawsM5 DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Tinkickef Posted June 23, 2018 Author Posted June 23, 2018 same problem in vr, fix for me was go to f10 map zoom all the way in and all the way out let it fully load when doing so. No more stutters and low fps... Thanks Sniper. Tried it, no dice. Problem still confined to PG map. System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
Tinkickef Posted June 24, 2018 Author Posted June 24, 2018 Someone on Hoggit mentioned taking off the headset for 20 seconds or so, then putting it back on. Tried it and it works.... for awhile, then it starts again. Got the Hornet started (PG, night mission, clouds and moonlight, cold and dark start), turned the flashlight off and the stutters did not return for a significantly longer time than previously, maybe 3 minutes as opposed to 1 minute. Took off and jitters did not return at all once I flew out of the clouds. System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2.
IceFire Posted June 25, 2018 Posted June 25, 2018 I had this issue I tracked it to the latest Nvidia drivers not working right, completely uninstalled them and then reinstalled the latest ones fresh and it worked also reverting did work as well. [sIGPIC][/sIGPIC] Matt "IceFire" Schuette Commander In Chief United States Atlantic Command Virtual Carrier Air Wing Eleven
Raven (Elysian Angel) Posted June 25, 2018 Posted June 25, 2018 I had this issue I tracked it to the latest Nvidia drivers not working right, completely uninstalled them and then reinstalled the latest ones fresh and it worked I had the same idea: I completely removed the driver in Safe Mode, re-installed it and it did indeed improve performance, but still not up to the point it used to be. Spoiler Ryzen 7 9800X3D | 96GB G.Skill RipjawsM5 DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Raven (Elysian Angel) Posted June 25, 2018 Posted June 25, 2018 same problem in vr, fix for me was go to f10 map zoom all the way in and all the way out let it fully load when doing so. No more stutters and low fps... I'll have to do more testing, but it seems to work for me as well. Thank you! If this indeed turns out to be the work-around, it could indicate the new memory manager (perhaps Update 4 and 5 contain "optimisations" for said manager?) is to blame for the recent performance drop... Spoiler Ryzen 7 9800X3D | 96GB G.Skill RipjawsM5 DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Recommended Posts