CHSStarKiller Posted July 28, 2018 Posted July 28, 2018 I was in a single player Quickstart mission, Gun and AIM-9. After taking out the 3 MIG's I got on the waypoints. At roughly 50nm from the WP3 base (I forget the name) I set my TCN to 44x for the field. I was not getting any decrease in range all the way up to the field. I've trie at 40, 50 and 100+nm with the same indications. Once over the base I even showed a range of 153nm even though I was over the field and had the TCN on my HSI ASUS ROG Strix Helios Case - ASUS AM4 ROG Strix X-570E MB - AMD Ryzen 5 3600 - 64 GB DDR4 3200 G.SKILL Ripjaws V Series - ASUS DualGeForce GTX 1070 - SSD 2x 1TB - HDD 10 TB - Windows 10 Home - Thrustmaster Warthog HOTAS - Thrustmaster TPR Pedels - TrackIR
Talonx1 Posted July 28, 2018 Posted July 28, 2018 Bug, turn tacan off and on again and it will return to tracking properly.
Eldur Posted July 28, 2018 Posted July 28, 2018 I've seen this quite often after losing the TACAN signal (practically no LOS) and regaining it - it then just shows the momentary range but it stays frozen. My workaround is just switching to Receive and back to T/R afterwards when it occurs. Can be tried out easily around Khasab especially since it's kinda in a valley.
Juuba Posted July 31, 2018 Posted July 31, 2018 I've had this happen in Multiplayer quite often. Tacan on the carrier (or carrier strike group) just stops receiving. Restarting the Tacan in the hornet did nothing. Sometimes I Amaze even Myself!
lastresort77 Posted August 2, 2018 Posted August 2, 2018 I have been having tacan show direction, but not range. Turning tacan on/off doesn't fix it. Sometimes it doesn't even show the proper direction. It is locked to the right tacan though because the letters for my tacan show up.
Recommended Posts