跳转到帖子

[WIP] Undercarriage retracts with weight on the wheels


已推荐帖子

发布于

If you (toggle) retract the undercarriage with weight on the wheels the undercarriage still retracts. This can occur while either stationary or rolling.

 

Surprisingly, the aircraft will eventually settle on its retracted undercarriage (without any prop strike occurring - just cuts through the ground) and you can still take off in this condition.

 

I'm just reporting the undercarriage retracting with weight on wheels issue here. Obviously there is a long way to go with the damage model, so the prop/ aircraft sinking into the ground/ no damage I'll put down to Early Access at this stage.

 

Found this on the Instant Action "Cold Start" and "Ready for Take-off" missions.

发布于
I'm just reporting the undercarriage retracting with weight on wheels issue here.

Not a bug. Happens with the real Yak-52 as well. ;)

i7-7700K 4.2GHz, 16GB, GTX 1070 

发布于

You can retract the gear in the real plane with WOW under some conditions, and the plane was designed to land with the gear retracted with little damage depending on the orientation of the prop which is itself designed to shatter in order to prevent damage to nosecase and rest of the engine.

 

It is an exceedingly clever design.

 

'Gimp

[sIGPIC][/sIGPIC]

A-4E | F-5E | F-14B | F/A-18C | AV-8B NA | UH-1H | FC3 | Yak-52 | KA-50 | Mi-8 | SA-342



i7 8700K | GTX 1070 Ti | 32GB 3000 DDR4

FAA Comm'l/Instrument, FAST Formation Wingman, Yak-52 Owner/Pilot

发布于
...the plane was designed to land with the gear retracted with little damage depending on the orientation of the prop which is itself designed to shatter in order to prevent damage to nosecase and rest of the engine.

How about the shock loading on the crankshaft?

i7-7700K 4.2GHz, 16GB, GTX 1070 

发布于
If you (toggle) retract the undercarriage with weight on the wheels the undercarriage still retracts. This can occur while either stationary or rolling.

 

IRL there are 2 levers - in the 1st cabin and in the 2nd (Instructor cabin). The lever in the second cabin is a command lever. If the 2nd lever is down or up the 1st lever will not work. Only if the 2nd lever is neutral the pilot from the 1st cabin can retract or lower the landing gear.

 

So, if in the Yak-52 module the 2nd lever is neutral and 1st pilot retracts the gear - they must retract. But if in the 2nd cabin the lever is down, the first one must not work - if you move it up the gear shall stay lowered.

发布于
How about the shock loading on the crankshaft?
My recollection is that an inspection is only required if the engine was making a certain level of power but since I have not had nor do I intend to have a prop strike I am going from memory when I first got the plane 3 and half years ago.

 

I do know from one of our engine rebuilders that they have not recorded damage to engines that were inspected after prop strikes.

 

'Gimp

[sIGPIC][/sIGPIC]

A-4E | F-5E | F-14B | F/A-18C | AV-8B NA | UH-1H | FC3 | Yak-52 | KA-50 | Mi-8 | SA-342



i7 8700K | GTX 1070 Ti | 32GB 3000 DDR4

FAA Comm'l/Instrument, FAST Formation Wingman, Yak-52 Owner/Pilot

  • 2年后...
发布于

No Change in 2020.  No problem.. First World Problem... Any/Someday is fine.. 

  • Do not own:  | F-15E | JF-17 | Fw 190 A-8 | Bf 109 |
  • Hardware:  [ - Ryzen7-5800X - 64GB - RX 6800 - X56 HOTAS Throttle -  WINWING Orion 2 F16EX Grip - TrackIR 5 - Tobii 5C - JetPad FSE - ]
游客
此主题已关闭,不能再回复。
  • 最近浏览   0位会员

    • 没有会员查看此页面。
×
×
  • 创建新的...