chardly38 Posted September 1, 2018 Posted September 1, 2018 Can some on please tell me what it takes to get JTAC to work with the AV8B and marking targets with the laser. I have placed the JTAC every where with a response No Mark.Target Practice.miz [sIGPIC][/sIGPIC] =&arrFilter_pf[gameversion]=&arrFilter_pf[filelang]=&arrFilter_pf[aircraft]=&arrFilter_CREATED_USER_NAME=chardly38&set_filter=Filter&set_filter=Y"]MY SKINS And Helios i7 2600k 3.4 quad w/ Hyper N520 cpu fan_, Asus Sabertooth z77_, RX 580_, Corsair Vengeance 1800 8Gb ram_, 112 OCZ Vertex 3_, Corsair HX 1000, 3 screens res 5292x1050_,and 1 1680x1050 Helios Ir Tracker 5 with Pro Clip_,Hotas Warthog#12167 ...
Ramsay Posted September 2, 2018 Posted September 2, 2018 (edited) As the mission is in the Persian Gulf, I can't test it. However I posted a Caucasus test mission (night) with working JTAC, so perhaps that will help you. For the JTAC to lase, the AV-8B needed to carry GBU-12's/AGM-65E's, I don't think the default JTAC knows of DMT, LST, etc., so marks targets for IRMav, etc. with smoke. Note: Mounting the Gunpod in Open Beta 2.5.2.18144, 'broke' the JTAC's coms sequence - I don't know if that is still the case as I mostly self lase or use CTLD JTAC's The default IA JTAC needs a clear line of sight to lase a target i.e. the AI can 'see' targets within the boundary fence of the disused airfield at Kobuleti but can't mark them with a laser, if they are on the opposite side of the mesh fence. Edited September 2, 2018 by Ramsay Add picture of typical 'no mark' situation. i9 9900K @4.8GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 11 Pro x64, Odyssey G93SC 5120X1440
defeatist99 Posted September 3, 2018 Posted September 3, 2018 https://github.com/ciribob/DCS-JTACAutoLaze
Recommended Posts